[NSRCA-dist8] Redmond

[Admin]

Jim-- I run my pump pressure up so that I am in about 1 1/4 turns.  But 
it is still very broad.

On 6/20/2011 7:07 PM, J N Hiller wrote:
> Hay Rex, no joy on the pump change, acted the same. Running the needle 2
> turns open is acceptable , for now but 3 turns results in no perceptible
> change. An F plug tolerates the rich transition better than a #8 but runs
> about 150 RPM less on the ground. Removing the extra head shim didn't change
> it noticeably. The #8 with the same needle setting and extra head shim
> really gets with it but runs hotter than I like, but you don't have these
> problems or compromises. All you need is a Honda generator and a couple
> extra batteries. Sounds simple to me and I like simple.
> Jim
>
> -----Original Message-----
> From: nsrca-dist8-bounces at lists.nsrca.org
> [mailto:nsrca-dist8-bounces at lists.nsrca.org]On Behalf Of Rex
> Sent: Monday, June 20, 2011 5:52 PM
> To: AK, ID, MT, OR, WA, WY
> Subject: Re: [NSRCA-dist8] Redmond
>
> Now you're getting it!  :-)
>
> J N Hiller<jnhiller at earthlink.net>  wrote:
>
>> I'm liking not having to mess with stuff. Just plug in the battery and
>> throttle up.
>>
>>
>> -----Original Message-----
>> From: nsrca-dist8-bounces at lists.nsrca.org
>> [mailto:nsrca-dist8-bounces at lists.nsrca.org]On Behalf Of Tim Stebbins
>> Sent: Monday, June 20, 2011 11:27 AM
>> To: AK, ID, MT, OR, WA, WY
>> Subject: Re: [NSRCA-dist8] Redmond
>>
>> Hiller going electric?   I never thought I would live to see it !
>> On Jun 20, 2011 9:08 AM, "astropuppy"<  astropuppy at gmail.com
>> <mailto:astropuppy at gmail.com>  >  wrote:
>>> "May need to explore the possibilities of an E-160 next winter." is this
> a
>>> Hiller Epiphany?
>>>
>>>
>>> ****
>>>
>>>
>>> On Mon, Jun 20, 2011 at 9:45 AM, J N Hiller<  jnhiller at earthlink.net
>> <mailto:jnhiller at earthlink.net>  >  wrote:
>>>> Talked to Wayne yesterday and he plans to be there. I'm still ironing
>>>> MonoKote here. Blue wing tips remaining and then I can add numbers and
>>>> letters. I'm looking forward to getting covered weight to see just how
>> much
>>>> gets added.****
>>>>
>>>> I'm still trying to figure out the lean top end on my #1 160. Can't get
>> it
>>>> to run sloppy rich and it seams to go lean on a hard vertical. I'm
>> beginning
>>>> to suspect the pump and may change it today. You know the more I fly the
>>>> E-55 the more I like E-Power. May need to explore the possibilities of
> an
>>>> E-160 next winter.****
>>>>
>>>> See you in Redmond.****
>>>>
>>>> Jim****
>>>>
>>>> ** ******
>>>>
>>>> -----Original Message-----
>>>> *From:* nsrca-dist8-bounces at lists.nsrca.org
>> <mailto:nsrca-dist8-bounces at lists.nsrca.org>   [mailto:
>>>> nsrca-dist8-bounces at lists.nsrca.org
>> <mailto:nsrca-dist8-bounces at lists.nsrca.org>  ]*On Behalf Of *astropuppy
>>>> *Sent:* Monday, June 20, 2011 6:41 AM
>>>> *To:* AK, ID, MT, OR, WA, WY
>>>> *Subject:* Re: [NSRCA-dist8] Redmond
>>>>
>>>> ** ******
>>>>
>>>> Thanks Tim, I'm sure Wayne will be available for harassment.****
>>>>
>>>> On Mon, Jun 20, 2011 at 7:17 AM, Tim<  tstebbins at gmail.com
>> <mailto:tstebbins at gmail.com>  >  wrote:****
>>>>
>>>> Who am I going to harass and who is going to harass me ? Sorry to hear
>>>> you can't make it. You will be missed. ****
>>>>
>>>>
>>>>
>>>> On Jun 19, 2011, at 9:15 AM, astropuppy wrote:****
>>>>
>>>> I'm not going to make the Redmond contest. Model airplane wise 2011 has
>> not
>>>> been the best of years for me.
>>>>
>>>> Let me just say, the realities of life have really put a damper on my
>> hobby
>>>> this year. My family and I wish everybody a good time in Redmond! I look
>>>> forward to seeing lots of pictures.
>>>>
>>>> Mike Riggs****
>>>>
>>>> _______________________________________________
>>>> NSRCA-dist8 mailing list
>>>> NSRCA-dist8 at lists.nsrca.org<mailto:NSRCA-dist8 at lists.nsrca.org>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8****
>>>>
>>>>
>>>> _______________________________________________
>>>> NSRCA-dist8 mailing list
>>>> NSRCA-dist8 at lists.nsrca.org<mailto:NSRCA-dist8 at lists.nsrca.org>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8****
>>>>
>>>> ** ******
>>>>
>>>> _______________________________________________
>>>> NSRCA-dist8 mailing list
>>>> NSRCA-dist8 at lists.nsrca.org<mailto:NSRCA-dist8 at lists.nsrca.org>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>>>>
>>>>
>> _______________________________________________
>> NSRCA-dist8 mailing list
>> NSRCA-dist8 at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8