[NSRCA-dist8] Foam Cores
Rex
trexlesh at msn.com
Sat Dec 11 15:29:20 AKST 2010
I need some cores too.... four of them!.....all the same!..... :))))
From: jnhiller at earthlink.net
To: nsrca-dist8 at lists.nsrca.org
Date: Sat, 11 Dec 2010 16:23:26 -0800
Subject: Re: [NSRCA-dist8] Foam Cores
OK Tim, but this is un-proven design with preformed compound curve fuselage sides.
You may want to borrow my forming plug also, whenever
Jim
-----Original Message-----
From: nsrca-dist8-bounces at lists.nsrca.org [mailto:nsrca-dist8-bounces at lists.nsrca.org]On Behalf Of Tim
Sent: Saturday, December 11, 2010 12:20 PM
To: AK, ID, MT, OR, WA, WY
Subject: Re: [NSRCA-dist8] Foam Cores
55 is a built up wing (at least that what the plans show). I would like a set of 160's also, if you are going to make some extras. I think I have enough 120's to last for awhile.
Thanks
On Dec 11, 2010, at 11:59 AM, Gordon Anderson wrote:
Jim,
I would like cores for an Option 55 and an Option 160....
Thanks!
--Gordon
On Dec 11, 2010, at 8:42 AM, J N Hiller wrote:
OK guys, who wants foam cores?
I picked up some 2" foam yesterday and I'm preparing to cut some more
Option-120 cores when I cut new 160 cores.
Jim
_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
_______________________________________________ NSRCA-dist8 mailing list NSRCA-dist8 at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20101212/620155d0/attachment.html>
More information about the NSRCA-dist8
mailing list