[NSRCA-dist8] PeteModel.com Spinners

[Michael Lance]

A little air time will give you just the boost you need John!  Come on
out and have some fun.
 
Mike
 
-----Original Message-----
From: nsrca-dist8-bounces at lists.nsrca.org
[mailto:nsrca-dist8-bounces at lists.nsrca.org] On Behalf Of John Foglesong
Sent: Tuesday, August 11, 2009 9:18 PM
To: AK, ID, MT, OR, WA, WY
Subject: Re: [NSRCA-dist8] PeteModel.com Spinners
 
Well... I got a big old hunk of Tru Turn iron on my Da 100 that
looks...Hell... Is one I just had to make one more cut on to fit the
prop in and blewy... Took too much off one side then the other
then......... Sigh!!
How you guys doing???? Dodged another bullet and hopefully will be
flying at least once this year.
JF
----- Original Message ----- 
From: Michael <mailto:michael.lance2 at comcast.net>  Lance 
To: 'AK, <mailto:nsrca-dist8 at lists.nsrca.org>  ID, MT, OR, WA, WY' 
Sent: Tuesday, August 11, 2009 8:46 PM
Subject: Re: [NSRCA-dist8] PeteModel.com Spinners
 
Gotta clean out the pipes someway.
 
How's that 40RE workin' for you Den?
 
-----Original Message-----
From: nsrca-dist8-bounces at lists.nsrca.org
[mailto:nsrca-dist8-bounces at lists.nsrca.org] On Behalf Of Dennis Cone
Sent: Tuesday, August 11, 2009 7:50 PM
To: 'AK, ID, MT, OR, WA, WY'
Subject: Re: [NSRCA-dist8] PeteModel.com Spinners
 
I have one of those spinners on my Symphony. As you know it has the ZDZ
40RE. I have been using a starter on this spinner and it works just
great. It is very strong. You just have to control the side forces. 
 
Yaks sometimes eat grass. But only when they have issues.
 
Den
 

  _____  

From: nsrca-dist8-bounces at lists.nsrca.org
[mailto:nsrca-dist8-bounces at lists.nsrca.org] On Behalf Of Rex
Sent: Tuesday, August 11, 2009 7:18 PM
To: nsrca-dist8 at lists.nsrca.org
Subject: Re: [NSRCA-dist8] PeteModel.com Spinners
 
Don't Yak's eat grass?
 
> From: michael.lance2 at comcast.net
> To: rcsteve at tcrcm.org; nsrca-dist8 at lists.nsrca.org
> Date: Tue, 11 Aug 2009 18:48:52 -0700
> Subject: Re: [NSRCA-dist8] PeteModel.com Spinners
> 
> I don't know Steve...I've got one of Pete's spinners on the front end
of
> my 50cc Yak. 
> 
> Mike
> 
> -----Original Message-----
> From: nsrca-dist8-bounces at lists.nsrca.org
> [mailto:nsrca-dist8-bounces at lists.nsrca.org] On Behalf Of Steve
Sterling
> Sent: Monday, August 10, 2009 11:33 PM
> To: AK, ID, MT, OR, WA, WY
> Subject: [NSRCA-dist8] PeteModel.com Spinners
> 
> A few folks viewed my Shinden in Redmond this last weekend and asked
> about the spinner I was using.
> 
> The spinner is light carbon fiber with AL backplate. The spinner
> attaches with 6 screws around where the spinner mates with the
> backplate. It has no nose bolt like Tru-Turn, etc. This allowed me to
> cut off the forward 1 inch or so of the spinner, making a duct for ram
> air to flow through the wide slots in the backplate and (hopefully)
> through the coils in the Axi electric motor that powers the aircraft.
> 
> Obviously this spinner is only viable for electrics.
> 
> Source was www.PeteModel.com.
> 
> Originally I ordered one through Chief Aircraft, but they stiffed me
by
> charging for it, sending other things in the order but not the
spinner,
> then denying that it wasn't in the package. I gave up on Chief and
> ordered directly from the PeteModel.com website.
> 
> Sure was fun getting to fly with you all again.....
> 
> Steve
> 
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
> 
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8

  _____  

_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20090812/d422598b/attachment.html>