[NSRCA-dist8] PeteModel.com Spinners

Rex trexlesh at msn.com
Tue Aug 11 18:18:20 AKDT 2009


Don't Yak's eat grass?
 
> From: michael.lance2 at comcast.net
> To: rcsteve at tcrcm.org; nsrca-dist8 at lists.nsrca.org
> Date: Tue, 11 Aug 2009 18:48:52 -0700
> Subject: Re: [NSRCA-dist8] PeteModel.com Spinners
> 
> I don't know Steve...I've got one of Pete's spinners on the front end of
> my 50cc Yak. 
> 
> Mike
> 
> -----Original Message-----
> From: nsrca-dist8-bounces at lists.nsrca.org
> [mailto:nsrca-dist8-bounces at lists.nsrca.org] On Behalf Of Steve Sterling
> Sent: Monday, August 10, 2009 11:33 PM
> To: AK, ID, MT, OR, WA, WY
> Subject: [NSRCA-dist8] PeteModel.com Spinners
> 
> A few folks viewed my Shinden in Redmond this last weekend and asked
> about the spinner I was using.
> 
> The spinner is light carbon fiber with AL backplate. The spinner
> attaches with 6 screws around where the spinner mates with the
> backplate. It has no nose bolt like Tru-Turn, etc. This allowed me to
> cut off the forward 1 inch or so of the spinner, making a duct for ram
> air to flow through the wide slots in the backplate and (hopefully)
> through the coils in the Axi electric motor that powers the aircraft.
> 
> Obviously this spinner is only viable for electrics.
> 
> Source was www.PeteModel.com.
> 
> Originally I ordered one through Chief Aircraft, but they stiffed me by
> charging for it, sending other things in the order but not the spinner,
> then denying that it wasn't in the package. I gave up on Chief and
> ordered directly from the PeteModel.com website.
> 
> Sure was fun getting to fly with you all again.....
> 
> Steve
> 
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
> 
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20090812/a04b78f3/attachment.html>


More information about the NSRCA-dist8 mailing list