<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body dir="auto">
<div dir="ltr"></div>
<div dir="ltr">Start at minute 7 for how do this in general from the TX. </div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><a href="https://youtu.be/OOK4S2cRWe8">https://youtu.be/OOK4S2cRWe8</a></div>
<div dir="ltr"><br>
On Nov 8, 2018, at 1:24 PM, Jas S via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div dir="ltr"><span>Hi Jim,</span><br>
<span></span><br>
<span>Where in the Tx will I find these settings?</span><br>
<span></span><br>
<span>Thanks,</span><br>
<span>Jason </span><br>
<span>Jas iP</span><br>
<span></span><br>
<blockquote type="cite"><span>On Nov 8, 2018, at 11:49 AM, James Oddino <<a href="mailto:joddino@me.com">joddino@me.com</a>> wrote:</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>Anything you want. I set mine to fixed, 1.1 mSec on the low end and 2.0 mSec on the high end. Then set the transmitter throttle channel to the same numbers. Then trim the low end for a good idle. You may need to jog the throttle
to start the motor but you want to have it idle when you pull it all the way down. Don’t forget to set the fail safe. I set that at .95 mSec. If you set up a brake you set it just slightly below 1.1 mSec.</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>Note that you can read all of these settings on the Jeti transmitter. Easy to set up. Pretty neat.</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite"><span>Jim</span><br>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>On Nov 8, 2018, at 8:17 AM, Jas S via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>> wrote:</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>What are the endpoints I need to set the Mezon for a Jeti radio?</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>Thanks </span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>_______________________________________________</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span>NSRCA-discussion mailing list</span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a></span><br>
</blockquote>
</blockquote>
<blockquote type="cite">
<blockquote type="cite"><span><a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></span><br>
</blockquote>
</blockquote>
<blockquote type="cite"><span></span><br>
</blockquote>
<span>_______________________________________________</span><br>
<span>NSRCA-discussion mailing list</span><br>
<span><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a></span><br>
<span><a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></span></div>
</blockquote>
</body>
</html>