<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Cliff,</div><div>Thank you for the info.</div><div><br></div><div>With my Castle ESCs, which is all I have used thus far, I set up an idle down switch, which effectively takes the trim down to zero and stops the motor when the stick is at idle. Then I flip the switch and get idle RPM, and away I go. The added safety benefit is, if the switch is in the run/idle position or throttle stick is not at idle, the ESC won't arm! I can hook everything up, and walk my plane out with no fear (respect yes, fear no) of the motor starting. Then switch to stop position which arms the ESC, then switch back to idle for the flight.</div><div><br></div><div>The question is, will the Jeti work the same way? I assume it has to read some low throttle position before it will spin up? I just want to control that with a switch.</div><div><br></div><div>Thanks again to all who have assisted me.<br><br>Sent from my iPad</div><div><br>On Nov 12, 2017, at 1:03 PM, Cliff Bradford <<a href="mailto:cliff357b@gmail.com">cliff357b@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div><div dir="auto">The ESC arming is normal I think, I'm using a Mezon and it arms as soon as it has power, the only way to have a safe system is to use dual rate or conditions and set a flat throttle curve. Some Jetti radios will arm and disarm the ESC from the transmitter but I don't think this function will work on other transmitters.</div><div dir="auto"> I have only used a jetti box to set my ESC up and there is no "save" function. But I have used it to program other ESC's and when I return settings are as I left them. There should be a way to save it but I can't help you. </div><div dir="auto"> You choose end points with a jetti box but again I have no idea how to do it with out a box, </div><div dir="auto"> Hopefully others will chime in but I think most use a box for set up and that's why such a low response. Cliff</div><div class="gmail_quote"><div>On Sun, Nov 12, 2017 at 10:52 AM W Anthony Abdullah via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto"><div>Looks like I will be ordering the programming box. <br><br>Sent from my iPad</div></div><div dir="auto"><div><br>On Nov 12, 2017, at 12:22 PM, Jon Bruml <<a href="mailto:jon@techstyles.com" target="_blank">jon@techstyles.com</a>> wrote:<br><br></div><blockquote type="cite"><div>
<div id="m_-6737979103930514532compose-container" style="direction:ltr">
<span><span content="Outlook Mobile for iOS"></span></span>
<div>
<div style="direction:ltr">I have excellent results with spin and mezon and have only used the programming boxes to set fixed end points </div>
<div><br>
</div>
<div class="m_-6737979103930514532acompli_signature">
<div style="direction:ltr">Jonathan Bruml</div>
<div style="direction:ltr">Techstyles</div>
<div style="direction:ltr"><a href="http://www.techstyles.com" target="_blank">www.techstyles.com</a></div>
</div>
<div class="gmail_quote">_____________________________<br>
From: W Anthony Abdullah via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org" target="_blank">nsrca-discussion@lists.nsrca.org</a>><br>
Sent: Sunday, November 12, 2017 11:04 AM<br>
Subject: [NSRCA-discussion] Jeti Opti Spin 90 Pro Question<br>
To: Vicente Bortone <<a href="mailto:vincebrc@gmail.com" target="_blank">vincebrc@gmail.com</a>>, General pattern discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org" target="_blank">nsrca-discussion@lists.nsrca.org</a>><br>
<br>
<br>
I got zero responses last time I posted it, so I am sending it out again in the hopes that I had a delivery failure of some kind.<br>
<br>
I would really appreciate some help with my ESC programming issues.<br>
<br>
I have a Neu Contra combo being controlled by the Jeti Opti Spin 90 Pro on which I am trying to set the idle down function.<br>
<br>
Using the idle down function on my 14MZ I am able to set a point at which it will idle smoothly, then completely stop when I hit the assigned switch.<br>
<br>
The problems;<br>
1. The ESC will arm even if the switch is in the stop position, is this normal?<br>
2. If I unplug the battery and plug it back in, the settings are forgotten<br>
3. I would like fixed end points, what do I need to do to save those settings in the ESC?<br>
<br>
I do not have the Jeti programmer, but will order one if necessary.<br>
<br>
Thank you<br>
<br>
Anthony<br>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org" target="_blank">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
<br>
<br>
</div>
</div>
</div>
</div></blockquote></div>_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org" target="_blank">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" rel="noreferrer" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></blockquote></div></div><div dir="ltr">-- <br></div><div class="gmail_signature" data-smartmail="gmail_signature">Cliff</div>
</div></blockquote></body></html>