<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif;" dir="ltr">
<p>Dale, Castle told one of my buddies to use 8 kHz instead of Outrunner which you have. I found a 21.5X13 to be a better prop choice and I have moved on to TP 6000 packs.<br>
</p>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="width: 98%; display: inline-block;">
<div id="divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> NSRCA-discussion <nsrca-discussion-bounces@lists.nsrca.org> on behalf of Olstinske Dale via NSRCA-discussion <nsrca-discussion@lists.nsrca.org><br>
<b>Sent:</b> Wednesday, November 1, 2017 4:57 PM<br>
<b>To:</b> Ken Dunlap<br>
<b>Cc:</b> General pattern discussion<br>
<b>Subject:</b> Re: [NSRCA-discussion] Castle settings</font>
<div><br>
</div>
</div>
<div style="-ms-word-wrap: break-word;">I did have the logging off. Just ran the motor with 8 kHz, the current went up to 67 A, which is a 10% improvement. I do know I can get well over 80A with the Mezon ESC, although no need for that much. What should I expect
with the Castle? I am using a Falcon 21x13.5 prop, TP 5000 pack.
<div><br>
</div>
<div>Dale</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
<div>
<blockquote type="cite">
<div>On Nov 1, 2017, at 4:22 PM, Ken Dunlap <<a href="mailto:kdunlap@hotmail.com">kdunlap@hotmail.com</a>> wrote:</div>
<br class="x_Apple-interchange-newline">
<div>
<div>
<div id="x_compose-container" style="direction: ltr;" itemtype="https://schema.org/EmailMessage" itemscope="">
<span itemtype="https://schema.org/Organization" itemscope="" itemprop="creator"><span itemprop="name"></span></span>
<div>
<div>
<div style="direction: ltr;">So just to add my experience. Check to see if logging is enabled on the ESC. If it is turn it off. I had a problem similar to this on this same esc and found out that logging on this esc drags it down.
</div>
<div style="direction: ltr;">Ken</div>
</div>
<div><br>
</div>
<div class="x_acompli_signature">Get <a href="https://aka.ms/o0ukef">Outlook for iOS</a></div>
</div>
</div>
<hr tabindex="-1" style="width: 98%; display: inline-block;">
<div id="x_divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> NSRCA-discussion <<a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>> on behalf of S. McNickle via
NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>><br>
<b>Sent:</b> Wednesday, November 1, 2017 7:07:59 PM<br>
<b>To:</b> General pattern discussion; Olstinske Dale; DaveL322<br>
<b>Subject:</b> Re: [NSRCA-discussion] Castle settings</font>
<div> </div>
</div>
<div>
<p style="color: rgb(51, 51, 51); font-family: helvetica,arial,sans-serif; font-size: 12pt;">
Maybe I should let Mark Atwood speak for himself, but he's kinda busy right now...</p>
<p style="color: rgb(51, 51, 51); font-family: helvetica,arial,sans-serif; font-size: 12pt;">
Mark told me he tried everything he could think of and couldn't get a Pletty Advance to run full power on a Castle ESC. He recommended the Jetti or O.S. I got the O.S. and it works fine.</p>
<p style="color: rgb(51, 51, 51); font-family: helvetica,arial,sans-serif; font-size: 12pt;">
<br>
</p>
<p style="color: rgb(51, 51, 51); font-family: helvetica,arial,sans-serif; font-size: 12pt;">
Scott</p>
<blockquote type="cite">
<div id="x_ox-10111d9076" style="-ms-word-wrap: break-word;">On November 1, 2017 at 5:51 PM Olstinske Dale via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>> wrote:<br>
<br>
V4.22, Low timing but is set on Outrunner Mode not 8khz…could that be it? Not sure why but thought I had read that the Advance works best in this mode?
<div>
<div>Will check if that fixes it as soon as I can.</div>
<div>Dale</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
<div>
<blockquote type="cite">
<div>On Nov 1, 2017, at 1:35 PM, DaveL322 <<a href="mailto:DaveL322@comcast.net">DaveL322@comcast.net</a>> wrote:</div>
<br class="x_ox-10111d9076-Apple-interchange-newline">
<div>
<div>
<div><span style="font-family: sans-serif;">What are the other settings? </span></div>
<div><span style="font-family: sans-serif;"><br>
</span></div>
<div><span style="font-family: sans-serif;">Specifically check - </span></div>
<div><span style="font-family: sans-serif;">Software is 4.22, or higher</span></div>
<div><span style="font-family: sans-serif;">Low timing</span></div>
<div><span style="font-family: sans-serif;">8khz pwm</span></div>
<div><span style="font-family: sans-serif;"><br>
</span></div>
<div><span style="font-family: sans-serif;">And.... All solder joints and connectors are healthy. </span></div>
<div><span style="font-family: sans-serif;"><br>
</span></div>
<div><span style="font-family: sans-serif;">Possibly try reloading software...not likely to help, but it might. </span></div>
<div><br>
</div>
<div id="x_ox-10111d9076-composer_signature">
<div style="color: rgb(87, 87, 87); font-size: 85%;">Regards,</div>
<div style="color: rgb(87, 87, 87); font-size: 85%;"><br>
</div>
<div style="color: rgb(87, 87, 87); font-size: 85%;">Dave</div>
<div style="color: rgb(87, 87, 87); font-size: 85%;"><br>
</div>
<div style="color: rgb(87, 87, 87); font-size: 85%;">Sent from my Sprint Samsung Galaxy Note5.</div>
</div>
<div><br>
</div>
<div style="font-size: 100%;">
<div>-------- Original message --------</div>
<div>From: Olstinske Dale via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>></div>
<div>Date: 11/1/17 3:59 PM (GMT-05:00)</div>
<div>To: General pattern discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>></div>
<div>Subject: [NSRCA-discussion] Castle settings</div>
<div><br>
</div>
</div>
I have an Edge 80 HV Esc, Plettenberg Advance motor. I usually need around 70-75 A to get good performance, but I can’t get more than 60A from this one. I’ve recalibrate the throttle (fixed end points) but no improvement. Wondering if there is some other setting
causing this?<br>
<br>
Thanks,<br>
<br>
Dale<br>
<br>
<br>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></div>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</blockquote>
<p class="x_default-style" style="color: rgb(51, 51, 51); font-family: helvetica,arial,sans-serif; font-size: 12pt;">
<br>
</p>
<blockquote type="cite">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></blockquote>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
</body>
</html>