<div dir="ltr"><div class="gmail_default" style="font-family:georgia,serif;color:rgb(0,0,255)">Jerry,</div><div class="gmail_default" style="font-family:georgia,serif;color:rgb(0,0,255)"><br></div><div class="gmail_default" style="font-family:georgia,serif;color:rgb(0,0,255)">I still have my original CellPro 10S that I bought in 2010 and have since purchased a 10XP.  I put in a good chunk of flights per year and have had exceptional fortune with these chargers.  The only thing I've done is replace the fan.  For Christmas last year, I wanted to try the Graupner Polaron chargers so I put it on the list.  I wound up getting the AC/DC one for Christmas.  On 15V, I can charge 2 5S packs at 6 amps no problem.  If I'm on AC power, the onboard power supply isn't quite as good and winds up charging at 4 amps.  There are several versions out there that are capable of charging more cells at higher amps as well.  I don't think that you can charge straight off the balance boards like you can with the CellPros but the graphing information is top notch.  It has many, many different functions as well including programming ESCs (I haven't tried this out yet).  Graupner updates the firmware frequently and brings new possibilities to the table every time.  It is a bit of a pain to update the firmware as 3 files are needed but it's only a pain because the update fails sometimes and you have to repeat the part that failed and it's only a couple clicks of the mouse to make that happen.  It's at least worth a look.</div><div class="gmail_default" style="font-family:georgia,serif;color:rgb(0,0,255)"><br></div><div class="gmail_default" style="font-family:georgia,serif;color:rgb(0,0,255)">Hobbico/Tower Hobbies carries them and, like Mike, are a huge supporter and advertiser with the NSRCA.  Here's a link if you'd like to check it out and there are several videos on YouTube to get an idea.  I really do like mine.   <a href="http://www3.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=Graupner+charger">http://www3.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=Graupner+charger</a></div><div class="gmail_default" style="font-family:georgia,serif;color:rgb(0,0,255)"><br></div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><b style="color:rgb(51,51,255)"><font style="font-family:comic sans ms,sans-serif" size="4">Scott A. McHarg</font></b><br><div>VSCL / CANVASS U.A.S. Research Pilot</div><div>Texas A&M University</div><div>PPL - ASEL</div></div></div></div></div></div>
<br><div class="gmail_quote">On Thu, Oct 8, 2015 at 7:50 AM, RJ Bohn via NSRCA-discussion <span dir="ltr"><<a href="mailto:nsrca-discussion@lists.nsrca.org" target="_blank">nsrca-discussion@lists.nsrca.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Here's my setup... Two server PSs running two TP 820s.  The TPs won't charge 10s packs but with dual ports they charge two 5S 5000 packs.  I built the thing with the help of a friend with a CNC machine.  All of this in a Pelican Storm Case.  Just need 120AC.<br>
<br>
Rich<br>
<br>
IP Mail<br>
<div class="HOEnZb"><div class="h5"><br>
> On Oct 8, 2015, at 08:22, Randy Forbus via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>> wrote:<br>
><br>
> The power lab 8 is a good charger, little more than you want to pay though.<br>
><br>
> ________________________________________<br>
> From: NSRCA-discussion <<a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>> on behalf of Budd Engineering via NSRCA-discussion <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>><br>
> Sent: Thursday, October 8, 2015 9:59 AM<br>
> To: List NSRCA-list<br>
> Subject: [NSRCA-discussion] 10s LiPo Charger Recommendation<br>
><br>
> Hi all, I’m in need of some advice/suggestions for a new LiPo charger for 10s packs.<br>
><br>
> For the past several years I’ve used CellPro-10S chargers with good results.  However recently one of my CellPro-10s' emitted the dreaded “magic smoke” when I connected a 10s pack for charging.  This also happened at the Nats 3 years ago, fortunately Mike M. from F3AU was there with inventory and I was able to purchase a replacement charger and press on.  However, after having a second one give up the ghost a few weeks ago (and after not many charge cycles - I don’t fly very much), I’m interested in exploring other options.<br>
><br>
><br>
> To try to add some focus to this here’s my search constraints:<br>
><br>
> 1.  It must be able to charge each cell individually through the balance connector, and give me a relative readout of each cell’s condition compared to the other 9 cells.<br>
><br>
> 2.  I’m not interested in chargers that have separate balancers from the charger (e.g. like the TP1010C).<br>
><br>
> 3.  Reliability and value are important, as is ease of use.<br>
><br>
> 4.  Cost no more than a replacement CellPro 10XP (<$180), unless a single charger can charge two 10s packs simultaneously, then I’d consider spending a bit more.<br>
><br>
> 5.  Customer service matters, if I can buy it through F3A Unlimited, that would be a PLUS.<br>
><br>
><br>
> With this in mind does anyone have a suggestion for what chargers I should consider?<br>
><br>
><br>
> I don’t get out much these days so it’s difficult to see what everyone’s using that works well.  So I really do appreciate everyone’s help with this.<br>
><br>
> Thx, Jerry<br>
> _______________________________________________<br>
> NSRCA-discussion mailing list<br>
> <a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> <a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" rel="noreferrer" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> _______________________________________________<br>
> NSRCA-discussion mailing list<br>
> <a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> <a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" rel="noreferrer" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" rel="noreferrer" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></div></div></blockquote></div><br></div>