<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div><span style="-webkit-text-size-adjust: auto;">Btw, I made a small fixture for soldering all those splices that worked great. Cut a 1" piece of standard size silicone fuel</span><span style="-webkit-text-size-adjust: auto;"> tubing and slice it on one side lengthwise. Then cut a small notch at the halfway point that is big enough to accommodate the tip of your soldering iron. Glue the tubing down with ca to a piece of wood with the slice and notch facing up. Cut all your wires the same length, strip about 1/4" off the ends, twist and tin with solder. Slide a piece of heat shrink over one side of the wire out of the way and then slide the wire into one end of the tubing so that the tinned end is into the notch. Slide the mating wire in from the other end until the tinned end is into the notch and on top of the tinned end of the other wire. Touch the joint with the tip of your iron and add solder if necessary. Let cool and pull the wire up through the slit. Slide the heat shrink over the joint and shrink. </span></div><div><span style="-webkit-text-size-adjust: auto;"><br></span></div><div><span style="-webkit-text-size-adjust: auto;">Verne</span></div><div style="-webkit-text-size-adjust: auto;"><br>Sent from my iPhone</div><div style="-webkit-text-size-adjust: auto;"><br>On Jul 4, 2014, at 12:57 PM, "Pascoe,Tim [Burlington]" <<a href="mailto:Tim.Pascoe@ec.gc.ca">Tim.Pascoe@ec.gc.ca</a>> wrote:<br><br></div><blockquote type="cite" style="-webkit-text-size-adjust: auto;"><div><meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="Generator" content="Microsoft Word 14 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Verdana;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:"Comic Sans MS";
panose-1:3 15 7 2 3 3 2 2 2 4;}
@font-face
{font-family:"Trebuchet MS";
panose-1:2 11 6 3 2 2 2 2 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:windowtext;}
span.EmailStyle18
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--><div class="WordSection1"><p class="MsoNormal"><span style="font-size:12.0pt;color:#1F497D">Perfect. Thanks!<o:p></o:p></span></p><p class="MsoNormal"><span style="font-size:12.0pt;color:#1F497D"><o:p> </o:p></span></p><div><p class="MsoNormal"><span style="color:navy">Timothy Pascoe <br></span><span style="font-size:7.5pt;font-family:"Comic Sans MS";color:navy">Environmental Scientist<o:p></o:p></span></p><p class="MsoNormal"><span style="font-size:7.5pt;font-family:"Comic Sans MS";color:navy"><o:p> </o:p></span></p><p class="MsoNormal"><span style="font-size:7.5pt;font-family:"Comic Sans MS";color:red">Yak Shaving - Any seemingly pointless activity which is actually necessary to solve a problem which solves a problem which, several levels of recursion later, solves the real problem you're working on<o:p></o:p></span></p><p class="MsoNormal"><span style="font-size:8.0pt;font-family:"Times New Roman","serif";color:#1F497D"><o:p> </o:p></span></p><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Verdana","sans-serif";color:purple">Environment Canada / Environnement Canada<br>Canada Centre for Inland Waters / Centre Canadien des Eaux Intérieures<br>867 Lakeshore Road / 867, chemin Lakeshore<br>Burlington, Ontario / Burlington (Ontario)</span><span style="color:navy"> <br></span><span style="font-size:10.0pt;font-family:"Verdana","sans-serif";color:purple">L7R 4A6<br><br></span><span style="font-size:10.0pt;font-family:"Trebuchet MS","sans-serif";color:green">Tel/Tél: (905) 336-6239<br>Fax/</span><span lang="EN-CA" style="font-size:10.0pt;font-family:"Trebuchet MS","sans-serif";color:green">Téléc</span><span style="font-size:10.0pt;font-family:"Trebuchet MS","sans-serif";color:green">: (905) 336-4609<br>E-mail/C. élec: </span><span style="color:navy"><a href="blocked::mailto:tim.pascoe@ec.gc.ca" title="mailto:tim.pascoe@ec.gc.ca"><span style="font-size:10.0pt;font-family:"Trebuchet MS","sans-serif";color:navy">tim.pascoe@ec.gc.ca</span></a><br></span><span lang="EN-CA" style="font-size:10.0pt;font-family:"Tahoma","sans-serif";color:navy">Government of Canada/Gouvernement du Canada</span><span style="color:navy"> <br></span><i><span style="font-size:7.5pt;font-family:"Comic Sans MS";color:gray">This e-mail represents the opinions and views solely held by its author and in no manner may be considered as representing those of his/her employer.</span></i><span style="color:#1F497D"><o:p></o:p></span></p></div><p class="MsoNormal"><span style="font-size:12.0pt;color:#1F497D"><o:p> </o:p></span></p><div><div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> Verne Koester [<a href="mailto:verne@mi.rr.com">mailto:verne@mi.rr.com</a>] <br><b>Sent:</b> Friday, July 04, 2014 12:26 PM<br><b>To:</b> Pascoe,Tim [Burlington]; General pattern discussion<br><b>Subject:</b> Re: [NSRCA-discussion] Wiring up adapters for a Cellpro 10XP<o:p></o:p></span></p></div></div><p class="MsoNormal"><o:p> </o:p></p><div><p class="MsoNormal">Tim, you are correct. It is the same for 5s packs, different for less than 5s. I made and use the same pigtails you are describing. <o:p></o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">Verne Koester<br><br>Sent from my iPhone<o:p></o:p></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>On Jul 4, 2014, at 12:06 PM, "Pascoe, Tim \[Burlington\] via NSRCA-discussion" <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>> wrote:<o:p></o:p></p></div><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal"><span style="font-size:12.0pt">I’m just looking for some clarification here. I want to do away with the bulky balance boards for my 10XP, and have purchased pigtails for plugging into the charger from FMA. I also have male JST-XH plugs for the other end, for balancing/charging my 5S packs (6 pin). As far as I can tell from the CellPro manual, in this particular instance the JST-PA and JST-XH wiring pin to pin are exactly the same. While the charger firmware allows for ‘native’ JST-XH wiring, this would only be required for less than 5S.</span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt"> </span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt">Yes? No? Am I missing something?</span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt"> </span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt"><a href="http://revolectrix.com/support_docs/item_1375.pdf">http://revolectrix.com/support_docs/item_1375.pdf</a> for the wiring diagram (pages 28-30).</span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt"> </span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt">Anyone else done this to streamline their field charging rig?</span><o:p></o:p></p><p class="MsoNormal"><span style="font-size:12.0pt"> </span><o:p></o:p></p><p class="MsoNormal"><span style="color:navy">Tim Pascoe </span><o:p></o:p></p><p class="MsoNormal"> <o:p></o:p></p></div></blockquote><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Times New Roman","serif"">_______________________________________________<br>NSRCA-discussion mailing list<br><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br><a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><o:p></o:p></span></p></div></blockquote></div></div></blockquote></body></html>