<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Thanks,<br>
That's what I use them for as well. The balance boards are a pain
plus somewhat dangerous if you use bullets. Just lost the info as to
what connector to order and where from.<br>
John<br>
<div class="moz-cite-prefix">On 4/10/2014 1:50 PM, Verne Koester
wrote:<br>
</div>
<blockquote
cite="mid:83B424F6-01CC-417A-8F40-FCB71A0E9DF1@mi.rr.com"
type="cite">
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
<div>Hi John,</div>
<div>The balance taps into the side of the Cellpro 10S & 10XP
are JST PA. You can buy them from Digikey or in pigtail form
from FMA. I make my own balance connectors rather than the
balance boards which I find cumbersome at best. Hope this
helps. </div>
<div><br>
</div>
<div>Verne<br>
<br>
Sent from my iPhone</div>
<div><br>
On Apr 10, 2014, at 3:41 PM, John Gayer <<a
moz-do-not-send="true" href="mailto:jgghome@comcast.net">jgghome@comcast.net</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
Mike,<br>
What are the connectors on the Cellpro 10 itself. I prefer to
make extensions for the 5S JST-XH rather than fight with the
balance boards all the time. I seem to have lost that
information.<br>
Thanks,<br>
John<br>
<div class="moz-cite-prefix">On 4/10/2014 12:02 PM, Mike
Mueller wrote:<br>
</div>
<blockquote
cite="mid:CAHk5YeHfXTLs3pYmWX1x8_nW4tSN+8APpafvY1dXUDXwffdjPg@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>
<div>Scott your right Power Unlimited Lipos by
F3aUnlimited were mostly PQ. Since I took over I've
made a decision to switch our newest packs over to
JST/XH. It's the most popular since Hobby King uses
this plug. Why fight it.<br>
</div>
I think it's like Beta versus VHS in the end even Sony
started making VHS and Beta was no more.<br>
</div>
<div> The balance boards on cellpro chargers are GP/KO
(Works with Hobby King JST/XH) and TP/PQ. Works with
polyquest and thunder power. We sell a lot of simple
adaptors that allow you to use different balancers. <br>
</div>
Thanks, Mike<br>
<div> <br>
</div>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On Thu, Apr 10, 2014 at 12:49 PM,
Michael Ramsey <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:milehipilot@gmail.com" target="_blank">milehipilot@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div>I've used this source successfully to
understand the differences:<br>
<a moz-do-not-send="true"
href="http://www.hansenhobbies.com/products/connectors/"
target="_blank">http://www.hansenhobbies.com/products/connectors/</a><br>
<br>
</div>
They are a resource that seems to cover all balance
tap types accept those used by Thunder Power and
Flight Power.<br>
</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On Thu, Apr 10, 2014 at
11:59 AM, Anthony Romano <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:anthonyr105@hotmail.com"
target="_blank">anthonyr105@hotmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="margin:0 0 0 .8ex;border-left:1px
#ccc solid;padding-left:1ex">
<div>
<div dir="ltr"><br>
IIRC the JST-xh and the PQ are the same
spacing and wiring order but the PQ has
a locking tab. A JST is the little red
one on small foamy packs. TP is much
smaller.
<div><br>
</div>
<div>Anthony<br>
<div>
<hr>From: <a moz-do-not-send="true"
href="mailto:precisionaero@hotmail.com" target="_blank">precisionaero@hotmail.com</a><br>
To: <a moz-do-not-send="true"
href="mailto:nsrca-discussion@lists.nsrca.org"
target="_blank">nsrca-discussion@lists.nsrca.org</a><br>
Date: Thu, 10 Apr 2014 09:14:13
-0600<br>
Subject: [NSRCA-discussion] What is
the difference between JST-XH/GP/PQ
balance plugs<br>
<br>
<div dir="ltr">Is there a functional
difference between these balance
plug types?
<div><br>
</div>
<div>Mike Cohen</div>
</div>
<br>
_______________________________________________
NSRCA-discussion
mailing list <a
moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org"
target="_blank">NSRCA-discussion@lists.nsrca.org</a>
<a moz-do-not-send="true"
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></div>
</div>
</div>
</div>
<br>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org"
target="_blank">NSRCA-discussion@lists.nsrca.org</a><br>
<a moz-do-not-send="true"
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
<br>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a moz-do-not-send="true"
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
NSRCA-discussion mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></pre>
</blockquote>
<br>
</div>
</blockquote>
<blockquote type="cite">
<div><span>_______________________________________________</span><br>
<span>NSRCA-discussion mailing list</span><br>
<span><a moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a></span><br>
<span><a moz-do-not-send="true"
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></span></div>
</blockquote>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
NSRCA-discussion mailing list
<a class="moz-txt-link-abbreviated" href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a>
<a class="moz-txt-link-freetext" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></pre>
</blockquote>
<br>
</body>
</html>