<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Don't use a mix.<br>
You need to determine first what the necessary channel output value
is to turn the glow on. <br>
Then set up your plug channel and use throttle stick(J3?) as its
input.<br>
In AFR, use a "POINT" curve to trigger the output value you need at
15% throttle to turn glow on, you have 9+ points available and I
believe you can move their x-coordinate as well.<br>
Then, for an ON/OFF switch use a dual rate on the plug channel and
the panel switch of your choice. You should then be able to set up a
second "POINT" curve when the dual rate is active that has all
values set to something that will turn and keep the glow off.<br>
<br>
I don't have a 12FG here to test this but it should work fine.<br>
John<br>
<br>
<div class="moz-cite-prefix">On 11/7/2013 8:11 PM, Ronald Van Putte
wrote:<br>
</div>
<blockquote cite="mid:30E55F3B-1BBE-486C-BB9B-9F307362248C@cox.net"
type="cite">OK. I think I understand. Pmix the throttle to the
channel the receiver controlled switch is plugged into and use the
throttle as the Pmix switch. Yes?
<div><br>
</div>
<div>Ron</div>
<div><br>
<div>
<div>On Nov 7, 2013, at 8:28 PM, Jas wrote:</div>
<br class="Apple-interchange-newline">
<blockquote type="cite">
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
<div dir="auto">
<div>Pmix throttle to glow plug and set the points to turn
on where you want<br>
<br>
<div>
<div>
<div>
<div>
<div>iJason</div>
</div>
</div>
</div>
</div>
<div><a moz-do-not-send="true"
href="http://www.jasonshangar.weebly.com/">www.jasonshangar.weebly.com</a></div>
</div>
<div><br>
On Nov 7, 2013, at 9:04 PM, Ronald Van Putte <<a
moz-do-not-send="true"
href="mailto:vanputter@gmail.com">vanputter@gmail.com</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>I think I'll just ignore that.
<div><br>
</div>
<div>Ron</div>
<div><br>
<div>
<div>On Nov 7, 2013, at 8:01 PM, Phil S. wrote:</div>
<br class="Apple-interchange-newline">
<blockquote type="cite">
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<div text="#cc0000" bgcolor="#ccffff">
Yes, Ron, switch to JR and it's easy!!! lol<br>
<pre class="moz-signature" cols="72">Phil Spelt, KCRC Emeritus, Past President
AMA 1294 Scientific Leader Member
SPA L-18, Board Member
(865)435-1476v, (865)604-0541c</pre>
<br>
On 11/7/2013 8:17 PM, Ronald Van Putte wrote:
<blockquote
cite="mid:C1E2E7D1-DDDB-499B-9EFA-225BB63992EA@cox.net"
type="cite">
<pre wrap="">I am trying to turn on an onboard glow plug battery on an O.S. .61RF using a receiver controlled switch, so that the glow will be on when the throttle stick position is less than 15% or so and off above that. I am drawing a blank on how to accomplish it.
I've used the throttle stick as a switch before to get dual rate rudder, but this is different.
I have a Futaba 12 FG transmitter and will be using a Futaba R617 receiver.
<b><big><big><big>Are there any useful suggestions out there?</big></big></big></b>
Ron Van Putte
_______________________________________________
NSRCA-discussion mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a>
</pre>
</blockquote>
</div>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a moz-do-not-send="true"
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<blockquote type="cite">
<div><span>_______________________________________________</span><br>
<span>NSRCA-discussion mailing list</span><br>
<span><a moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a></span><br>
<span><a moz-do-not-send="true"
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></span></div>
</blockquote>
</div>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a moz-do-not-send="true"
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a class="moz-txt-link-freetext" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
NSRCA-discussion mailing list
<a class="moz-txt-link-abbreviated" href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a>
<a class="moz-txt-link-freetext" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></pre>
</blockquote>
<br>
</body>
</html>