<font color='black' size='3' face='Arial, Helvetica, sans-serif'><FONT face="Arial, Helvetica, sans-serif">Can average volts cause problems like Robert is seeing? Could the speed control be looking for both a voltage peak and duration?</FONT><br>
<br>
<div style="CLEAR: both"><FONT color=black face="Arial, Helvetica, sans-serif"><FONT color=black face=arial><SPAN style="FONT-SIZE: medium" class=Apple-style-span>Jon</SPAN></FONT></FONT></div>
<br>
<br>
<div style="FONT-FAMILY: arial,helvetica; COLOR: black; FONT-SIZE: 10pt">-----Original Message-----<br>
From: ehaury <ejhaury@comcast.net><br>
To: General pattern discussion <nsrca-discussion@lists.nsrca.org><br>
Sent: Fri, Mar 16, 2012 3:24 pm<br>
Subject: Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC<br>
<br>
<div id=AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735>
<div><FONT face=Arial>Well, Jim caught me. So much for quick & dirty! </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>I made the servo signal measurements using a high impedance meter with a scope mode. It displays a voltage at the top of the scope screen, as well as a freq. Without thinking, that voltage is the number I reported, and it's 50% different between the RX's because one was operating at 2X the freq of the other, but it's not pulse amplitude but average volts. </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>I took another look and the actual pulse amplitude is the same for both, and is 3v as Jim observed. Pretty obvious upon thinking about it. So - Futaba didn't change anything and Robert's problem isn't with pulse amplitude. </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>Jim, thanks for questioning me - sorry for the confusion. </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>Earl</FONT></div>
<div><FONT face=Arial></FONT> </div>
<BLOCKQUOTE style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px" dir=ltr>
<div style="FONT: 10pt arial">----- Original Message ----- </div>
<div style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A title=joddino@socal.rr.com href="mailto:joddino@socal.rr.com">James Oddino</A> </div>
<div style="FONT: 10pt arial"><B>To:</B> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">General pattern discussion</A> </div>
<div style="FONT: 10pt arial"><B>Sent:</B> Friday, March 16, 2012 1:55 PM</div>
<div style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</div>
<div><br>
</div>
Earl, something doesn't look right. How did you measure the pulse amplitude? Did you have a servo connected? I measure 3.0 volts peak unloaded on a 6108SB.
<div><br>
</div>
<div>Jim O</div>
<div><br>
</div>
<div><br>
<div>
<div>On Mar 16, 2012, at 8:18 AM, ehaury wrote:</div>
<BR class=Apple-interchange-newline>
<BLOCKQUOTE type="cite">
<STYLE>#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 td{color: black;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 UNKNOWN { FONT-FAMILY:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 UNKNOWN { MARGIN:1in 1.25in;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 _filtered {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 _filtered {margin:1.0in 1.25in 1.0in 1.25in;} @font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.MsoNormal,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.MsoNormal,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 a:link,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.MsoHyperlink {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 a:visited,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.MsoHyperlinkFollowed {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p {mso-margin-top-alt:auto; margin-right:0in; mso-margin-bottom-alt:auto; margin-left:0in; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal {mso-margin-top-alt:auto; margin-right:0in; mso-margin-bottom-alt:auto; margin-left:0in; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal1,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal1,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal1 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal2,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal2,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal2 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal3,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal3,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal3 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal4,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal4,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal4 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal5,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal5,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal5 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal6,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal6,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal6 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal7,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal7,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal7 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal8,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal8,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal8 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal9,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal9,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal9 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 p.yiv312173478msonormal10,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 li.yiv312173478msonormal10,#AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.yiv312173478msonormal10 {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlink1 {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlink2 {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlink3 {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlinkfollowed1 {color:purple; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlink4 {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlinkfollowed2 {color:purple; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlink5 {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlinkfollowed3 {color:purple; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478emailstyle171 {font-family:Arial; color:windowtext;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlink6 {color:blue; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478msohyperlinkfollowed4 {color:purple; text-decoration:underline;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478emailstyle172 {font-family:Arial; color:windowtext;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.yiv312173478emailstyle191 {font-family:Arial; color:navy;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.emailstyle46 {font-family:Arial; color:navy;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.EmailStyle43 {mso-style-type:personal; font-family:Arial; color:navy;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 span.EmailStyle45 {mso-style-type:personal-reply; font-family:Arial; color:navy;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in;} #AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 div.Section1 {page:Section1;} </STYLE>
<div lang=EN-US link="blue" vlink="blue" bgcolor="white">
<div><FONT face=Arial>I compared the servo pulse amplitude of the 6008HS (0.64v) and the 7008SB (0.32v) RXs. That's a significant difference, while Futaba servos are designed to work at that level, other stuff isn't. That's likely the issue with your ESC. </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>Earl</FONT></div>
<BLOCKQUOTE style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px" dir=ltr>
<div style="FONT: 10pt arial">----- Original Message ----- </div>
<div style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A title=robcase1@cox.net href="mailto:robcase1@cox.net">Robert Green</A> </div>
<div style="FONT: 10pt arial"><B>To:</B> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">'General pattern discussion'</A> </div>
<div style="FONT: 10pt arial"><B>Sent:</B> Friday, March 16, 2012 8:44 AM</div>
<div style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</div>
<div><br>
</div>
<div class=Section1>
<div class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Thanks Earl i was told that someone else in Europe was experiencing similar problems with theirs as well. Hope they can get it resloved.</SPAN></FONT></div>
<div class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT></div>
<div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A> [<A href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>] <B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>ehaury<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Friday, March 16, 2012 8:27 AM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern discussion<br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT size=3 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 12pt">Suggest you give Futaba service / Steve Kaluf a call. It may be that the RX pulse rise is a little low for the ESC. Futaba have, in the past at least, used a lower pulse amplitude than some others which resulted in strange results when mixing servos on occasion. If this is the case, the problem is more compatibility with the ESC than RX defect, still annoying though.</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 12pt">Earl</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<BLOCKQUOTE style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<div>
<div class=MsoNormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">----- Original Message ----- </SPAN></FONT></div>
</div>
<div style="font-color: black">
<div style="BACKGROUND: #e4e4e4" class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A title=robcase1@cox.net href="mailto:robcase1@cox.net">Robert Green</A> </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">To:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">'General pattern discussion'</A> </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Sent:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Friday, March 16, 2012 7:42 AM</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Subject:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Ed, I don't like it either I mat try a ferrite ring, as I like the telemetry feature on the tx from the rx. Anyone else using the 18MZ receiver seeing any issues with the motor cutting out?</SPAN></FONT></div>
<div class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT></div>
<div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A> [<A href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>] <B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Ed White<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Friday, March 16, 2012 6:56 AM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern discussion<br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Robert,<br>
<br>
The only way I can think of that this is a receiver problem is that motor or ESC noise is being picked up on the ESC lines (any or all) and the 8 channel Rx is somehow more tolerant of the noise or better able to filter it than the other Rx. I would be uncomfortable at leaving this at - I have to use my old receiver. <br>
<br>
Ed</SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"></SPAN></FONT></div>
<div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt">
<HR align=center SIZE=1 width="100%">
</SPAN></FONT></div>
<div class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> Ronald Van Putte <<A href="mailto:vanputte@cox.net">vanputte@cox.net</A>><br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern discussion <<A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thu, March 15, 2012 10:14:28 PM<br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC<br>
</SPAN></FONT><br>
Wait a minute. "<SPAN class=apple-style-span><FONT color=navy size=2><SPAN style="COLOR: navy; FONT-SIZE: 10pt">The problem was with the receiver." doesn't quite cut it. What was the problem? </SPAN></FONT></SPAN></div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><SPAN class=apple-style-span><FONT color=navy size=2 face="Times New Roman"><SPAN style="COLOR: navy; FONT-SIZE: 10pt">I'm glad you got the problem "solved", but you can't trust that receiver until you identify the problem. BTW, "I don't know" is a perfectly valid answer, but you could save somebody else a lot of grief if you know what was wrong with the receiver.</SPAN></FONT></SPAN></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><SPAN class=apple-style-span><FONT color=navy size=2 face="Times New Roman"><SPAN style="COLOR: navy; FONT-SIZE: 10pt">Ron</SPAN></FONT></SPAN></div>
</div>
<div>
<div class=MsoNormal><SPAN class=apple-style-span><FONT color=navy size=2 face="Times New Roman"><SPAN style="COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT></SPAN></div>
<div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">On Mar 15, 2012, at 8:26 PM, Robert Green wrote:</SPAN></FONT></div>
</div>
<div style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
<div>
<div>
<div class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Well I think I found the issue with the Jeti and the Plettenberg. The problem was with the receiver. I recently got a new radio, and installed the new rx in the plane, and then the issue started showing up. I even went and borrowed a Jeti99Spin, to see if this would resolve the issue, but it did not, so I started to think of everything that I had changed, and decided to go back to my 8 channel receiver and voila, everything is back to normal. Thanks to everyone for there input. Feels good to have the problem behind me</SPAN></FONT></div>
<div class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT></div>
<div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A> [<A href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>] <B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Robert Campbell<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thursday, March 15, 2012 8:38 AM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern discussion<br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">My suggestion to limit throttle isn't to limit current draw. It's to limit the motor RPM's so the ESC can remain synchronized with the motor. If the motor turns faster than the ESC can handle, the motor will begin screeching. I've only seen this on outrunners, never inrunners.</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Rob</SPAN></FONT></div>
</div>
<BLOCKQUOTE style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<div>
<div class=MsoNormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">----- Original Message ----- </SPAN></FONT></div>
</div>
<div>
<div style="BACKGROUND: #e4e4e4" class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A title=bob@toprudder.com href="mailto:bob@toprudder.com">Bob Richards</A> </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">To:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">General pattern discussion</A> </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Sent:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Thursday, March 15, 2012 7:55 AM</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Subject:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<TABLE class=MsoNormalTable border=0 cellSpacing=0 cellPadding=0>
<TBODY>
<TR>
<TD style="PADDING-BOTTOM: 0in; PADDING-LEFT: 0in; PADDING-RIGHT: 0in; PADDING-TOP: 0in" vAlign=top>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">That was my thought. I don't understand why one would want to limit the throttle to something less than full. Why not install a prop that loads the motor less?</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">Bob R.</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"><br>
<br>
--- On <B><SPAN style="FONT-WEIGHT: bold">Thu, 3/15/12, Peter Vogel <I><SPAN style="FONT-STYLE: italic"><<A href="mailto:vogel.peter@gmail.com">vogel.peter@gmail.com</A>></SPAN></I></SPAN></B> wrote:</SPAN></FONT></div>
</div>
<BLOCKQUOTE style="BORDER-BOTTOM: medium none; BORDER-LEFT: #1010ff 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN-TOP: 5pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; MARGIN-BOTTOM: 5pt; MARGIN-LEFT: 3.75pt; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<div style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"><br>
From: Peter Vogel <<A href="mailto:vogel.peter@gmail.com">vogel.peter@gmail.com</A>><br>
Subject: Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC<br>
To: " General pattern discussion " <<A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><br>
Cc: "General patterndiscussion" <<A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><br>
Date: Thursday, March 15, 2012, 12:15 AM</SPAN></FONT></div>
<div id=yiv312173478>
<div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">Limiting throttle does NOT limit current to the motor, in fact, it can cause higher current draw. All throttle does is vary the on vs off cycle during which voltage is sent to the motor. </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">Peter+<br>
<br>
Sent from my iPhone4S</SPAN></FONT></div>
</div>
<div>
<div style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"><br>
On Mar 14, 2012, at 7:29 PM, "Robert Green" <<A href="http://us.mc1616.mail.yahoo.com/mc/compose?to=robcase1@cox.net" target=_blank>robcase1@cox.net</A>> wrote:</SPAN></FONT></div>
</div>
<BLOCKQUOTE style="MARGIN-TOP: 5pt; MARGIN-BOTTOM: 5pt" type="cite">
<div>
<div>
<div class=yiv312173478msonormal><FONT color=navy size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Hi Rob, the Static amps on the ground is 81 amps. My throttle is limited to 85 percent. Even changed out the speed controller and the same thing happened. Really wish i knew what was going on?</SPAN></FONT></div>
</div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=yiv312173478msonormal><B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A href="http://us.mc1616.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org" target=_blank>nsrca-discussion-bounces@lists.nsrca.org</A> [<A href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>] <B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Robert Campbell<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, March 14, 2012 9:18 PM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern discussion<br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
</BLOCKQUOTE></div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Robert,</SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Which Jeti are you running? Advance or Spin? Just a guess, but all the outrunners I've run require low timing advance and some require fixed end points and the throttle to be limited to 70 percent or so. Also, have your checked your set-up on a watt meter? Sometimes our set-ups pull more current than we were expecting and the ESC over current protection kicks in.</SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Hope this helps.</SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Rob</SPAN></FONT></div>
</div>
<BLOCKQUOTE style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">----- Original Message ----- </SPAN></FONT></div>
</div>
<div>
<div style="BACKGROUND: #e4e4e4" class=yiv312173478msonormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A title=robcase1@cox.net href="http://us.mc1616.mail.yahoo.com/mc/compose?to=robcase1@cox.net" target=_blank>Robert Green</A> </SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">To:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A title=nsrca-discussion@lists.nsrca.org href="http://us.mc1616.mail.yahoo.com/mc/compose?to=nsrca-discussion@lists.nsrca.org" target=_blank>'General pattern discussion'</A> </SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Sent:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Wednesday, March 14, 2012 8:19 PM</SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Subject:</SPAN></FONT></B><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></div>
</div>
<div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Is anyone out there running this combo. Went flying today, and had some issue with the speed controller cutting out when i was setting up for my approach into the pattern. I was pulling up and advanced the throttle to do an reverse cuban eight to get into my pattern, when the motor suddenly quit. I pulled the throttle back and advanced it once again and the motor came back it did this on every flight except the first flight where i had no issues whatsoever. my setting are high timing for the motor, low cut off voltage, acceleration high,</SPAN></FONT> </div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"> </SPAN></FONT></div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"> </SPAN></FONT></div>
<div class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">thnaks in advance</SPAN></FONT> </div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=yiv312173478msonormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="http://us.mc1616.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org" target=_blank>NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A> </SPAN></FONT></div>
</BLOCKQUOTE></BLOCKQUOTE>
<BLOCKQUOTE style="MARGIN-TOP: 5pt; MARGIN-BOTTOM: 5pt" type="cite">
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="http://us.mc1616.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org" target=_blank>NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></div>
</div>
</BLOCKQUOTE>
<div style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"><br>
-----Inline Attachment Follows-----</SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="http://us.mc1616.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org" target=_blank>NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></div>
</div>
</TD></TR></TBODY></TABLE>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></div>
</BLOCKQUOTE></div>
</div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT></div>
</div>
</div>
</div>
</div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A> </SPAN></FONT></div>
<div style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></div>
<div color="#000000"><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">No virus found in this message.<br>
Checked by AVG - <A href="http://www.avg.com/" target=_blank>www.avg.com</A><br>
Version: 2012.0.1913 / Virus Database: 2114/4873 - Release Date: 03/15/12</SPAN></FONT></div>
</BLOCKQUOTE></div>
<div><BR class=webkit-block-placeholder></div>
<HR>
<div><BR class=webkit-block-placeholder></div>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
<div><BR class=webkit-block-placeholder></div>
<HR>
<div><BR class=webkit-block-placeholder></div>
<A></A>
<div align=left color="#000000">No virus found in this message.<br>
Checked by AVG - <A href="http://www.avg.com/" target=_blank>www.avg.com</A><br>
Version: 2012.0.1913 / Virus Database: 2114/4873 - Release Date: 03/15/12</div>
</BLOCKQUOTE></div>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></BLOCKQUOTE></div>
<br>
</div>
<div>
<HR>
<div></div>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
<div>
<HR>
<div></div>
<A></A>
<div align=left color="#000000">No virus found in this message.<br>
Checked by AVG - <A href="http://www.avg.com/" target=_blank>www.avg.com</A><br>
Version: 2012.0.1913 / Virus Database: 2114/4874 - Release Date: 03/16/12</div>
</BLOCKQUOTE></div>
<!-- end of AOLMsgPart_2_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 -->
<div style="BACKGROUND-COLOR: #fff; MARGIN: 0px; FONT-FAMILY: Tahoma, Verdana, Arial, Sans-Serif; COLOR: #000; FONT-SIZE: 12px" id=AOLMsgPart_3_b35c1f35-15b5-4b5f-bfc7-c5ad82755735><PRE style="FONT-SIZE: 9pt"><TT>_______________________________________________
NSRCA-discussion mailing list
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
</TT></PRE></div>
<!-- end of AOLMsgPart_3_b35c1f35-15b5-4b5f-bfc7-c5ad82755735 --></div>
</font>