<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19190"></HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT color=#0000ff size=2 face=Arial>Is BIG reason why I stopped buying
and condoning FuTOYba 20 some years ago. They don't honestly care about the
small fries.</FONT></DIV>
<DIV><FONT color=#0000ff size=2 face=Arial> </FONT></DIV>
<DIV><FONT color=#0000ff size=2 face=Arial> Del </FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #0000ff 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=jonlowe@aol.com href="mailto:jonlowe@aol.com">Jon Lowe</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, March 16, 2012 12:22
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion]
Plettenberg 30-10 evo and Jeti ESC</DIV>
<DIV><BR></DIV><FONT color=black size=3 face="Arial, Helvetica, sans-serif">
<DIV><FONT face="Arial, Helvetica, sans-serif">Is this worth a
shot?</FONT></DIV>
<DIV> </DIV>
<DIV><A
href="http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8356">http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8356</A></DIV>
<DIV> </DIV>
<DIV>It's disappointing that after the various radio manufacturers
standardized wiring, signal timing, etc. for servos, that Futaba would
move, again, in this direction. They should make clear in their
advertising that their new receivers may not be compatible with equipment you
already have. Should be considered a design defect. All this does
is hurt the customers.<BR><BR></DIV>
<DIV style="CLEAR: both"><FONT color=black
face="Arial, Helvetica, sans-serif"><FONT color=black face=arial><SPAN
style="FONT-SIZE: medium"
class=Apple-style-span>Jon</SPAN></FONT></FONT></DIV><BR><BR>
<DIV
style="FONT-FAMILY: arial,helvetica; COLOR: black; FONT-SIZE: 10pt">-----Original
Message-----<BR>From: ehaury <ejhaury@comcast.net><BR>To: General
pattern discussion <nsrca-discussion@lists.nsrca.org><BR>Sent: Fri, Mar
16, 2012 10:31 am<BR>Subject: Re: [NSRCA-discussion] Plettenberg 30-10 evo and
Jeti ESC<BR><BR>
<DIV id=AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2>
<STYLE>@font-face {
font-family: Tahoma;
}
@page Section1 {size: 8.5in 11.0in; margin: 1.0in 1.25in 1.0in 1.25in; }
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 TD {
COLOR: black
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 UNKNOWN {
FONT-FAMILY: Tahoma; panose-1: 2 11 6 4 3 5 4 4 2 4
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 UNKNOWN {
MARGIN: 1in 1.25in
}
UNKNOWN {
FONT-FAMILY: Tahoma; panose-1: 2 11 6 4 3 5 4 4 2 4
}
UNKNOWN {
MARGIN: 1in 1.25in
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.MsoNormal {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.MsoNormal {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.MsoNormal {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 A:link {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.MsoHyperlink {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 A:visited {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.MsoHyperlinkFollowed {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P {
FONT-FAMILY: "Times New Roman"; MARGIN-LEFT: 0in; FONT-SIZE: 12pt; MARGIN-RIGHT: 0in; mso-margin-top-alt: auto; mso-margin-bottom-alt: auto
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal {
FONT-FAMILY: "Times New Roman"; MARGIN-LEFT: 0in; FONT-SIZE: 12pt; MARGIN-RIGHT: 0in; mso-margin-top-alt: auto; mso-margin-bottom-alt: auto
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal {
FONT-FAMILY: "Times New Roman"; MARGIN-LEFT: 0in; FONT-SIZE: 12pt; MARGIN-RIGHT: 0in; mso-margin-top-alt: auto; mso-margin-bottom-alt: auto
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal {
FONT-FAMILY: "Times New Roman"; MARGIN-LEFT: 0in; FONT-SIZE: 12pt; MARGIN-RIGHT: 0in; mso-margin-top-alt: auto; mso-margin-bottom-alt: auto
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal1 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal1 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal1 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal2 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal2 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal2 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal3 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal3 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal3 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal4 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal4 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal4 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal5 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal5 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal5 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal6 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal6 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal6 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal7 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal7 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal7 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal8 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal8 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal8 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal9 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal9 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal9 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 P.yiv312173478msonormal10 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 LI.yiv312173478msonormal10 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.yiv312173478msonormal10 {
MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; FONT-SIZE: 12pt
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlink1 {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlink2 {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlink3 {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlinkfollowed1 {
COLOR: purple; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlink4 {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlinkfollowed2 {
COLOR: purple; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlink5 {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlinkfollowed3 {
COLOR: purple; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478emailstyle171 {
FONT-FAMILY: Arial; COLOR: windowtext
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlink6 {
COLOR: blue; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478msohyperlinkfollowed4 {
COLOR: purple; TEXT-DECORATION: underline
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478emailstyle172 {
FONT-FAMILY: Arial; COLOR: windowtext
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.yiv312173478emailstyle191 {
FONT-FAMILY: Arial; COLOR: navy
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.emailstyle46 {
FONT-FAMILY: Arial; COLOR: navy
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.EmailStyle43 {
FONT-FAMILY: Arial; COLOR: navy; mso-style-type: personal
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 SPAN.EmailStyle45 {
FONT-FAMILY: Arial; COLOR: navy; mso-style-type: personal-reply
}
#AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 DIV.Section1 {
page: Section1
}
</STYLE>
<DIV><FONT face=Arial>I compared the servo pulse amplitude of the 6008HS
(0.64v) and the 7008SB (0.32v) RXs. That's a significant difference, while
Futaba servos are designed to work at that level, other stuff isn't. That's
likely the issue with your ESC. </FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Earl</FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=robcase1@cox.net href="mailto:robcase1@cox.net">Robert Green</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">'General pattern
discussion'</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, March 16, 2012 8:44
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion]
Plettenberg 30-10 evo and Jeti ESC</DIV>
<DIV><BR></DIV>
<DIV class=Section1>
<DIV class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Thanks Earl i was
told that someone else in Europe was experiencing similar problems with
theirs as well. Hope they can get it resloved.</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT> </DIV>
<DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN
style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A>
[<A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of
</SPAN></B>ehaury<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B>
Friday, March 16, 2012 8:27 AM<BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern
discussion<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC</SPAN></FONT></DIV></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 12pt">Suggest you give Futaba service
/ Steve Kaluf a call. It may be that the RX pulse rise is a little low for
the ESC. Futaba have, in the past at least, used a lower pulse amplitude
than some others which resulted in strange results when mixing servos on
occasion. If this is the case, the problem is more compatibility with the
ESC than RX defect, still annoying though.</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 12pt">Earl</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<BLOCKQUOTE
style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<DIV>
<DIV class=MsoNormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">----- Original Message -----
</SPAN></FONT></DIV></DIV>
<DIV style="font-color: black">
<DIV style="BACKGROUND: #e4e4e4" class=MsoNormal><B><FONT size=2
face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A
title=robcase1@cox.net href="mailto:robcase1@cox.net">Robert Green</A>
</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">To:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">'General pattern
discussion'</A> </SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Sent:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">
Friday, March 16, 2012 7:42 AM</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Subject:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Re:
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Ed, I don't like
it either I mat try a ferrite ring, as I like the telemetry feature on the
tx from the rx. Anyone else using the 18MZ receiver seeing any
issues with the motor cutting out?</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT> </DIV>
<DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN
style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A>
[<A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Ed
White<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Friday, March
16, 2012 6:56 AM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B>
General pattern discussion<BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion]
Plettenberg 30-10 evo and Jeti ESC</SPAN></FONT></DIV></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV>
<DIV>
<DIV class=MsoNormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Robert,<BR><BR>The only way I
can think of that this is a receiver problem is that motor or ESC noise is
being picked up on the ESC lines (any or all) and the 8 channel Rx is
somehow more tolerant of the noise or better able to filter it than the
other Rx. I would be uncomfortable at leaving this at - I have to
use my old receiver. <BR><BR>Ed</SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"></SPAN></FONT> </DIV>
<DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=2
face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt">
<HR align=center SIZE=1 width="100%">
</SPAN></FONT></DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN
style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt">
Ronald Van Putte <<A
href="mailto:vanputte@cox.net">vanputte@cox.net</A>><BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern discussion <<A
href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thu, March 15, 2012 10:14:28
PM<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC<BR></SPAN></FONT><BR>Wait a minute. "<SPAN
class=apple-style-span><FONT color=navy size=2><SPAN
style="COLOR: navy; FONT-SIZE: 10pt">The problem was with the receiver."
doesn't quite cut it. What was the problem?
</SPAN></FONT></SPAN></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><SPAN class=apple-style-span><FONT color=navy size=2
face="Times New Roman"><SPAN style="COLOR: navy; FONT-SIZE: 10pt">I'm glad
you got the problem "solved", but you can't trust that receiver until you
identify the problem. BTW, "I don't know" is a perfectly valid
answer, but you could save somebody else a lot of grief if you know what
was wrong with the receiver.</SPAN></FONT></SPAN></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><SPAN class=apple-style-span><FONT color=navy size=2
face="Times New Roman"><SPAN
style="COLOR: navy; FONT-SIZE: 10pt">Ron</SPAN></FONT></SPAN></DIV></DIV>
<DIV>
<DIV class=MsoNormal><SPAN class=apple-style-span><FONT color=navy size=2
face="Times New Roman"><SPAN
style="COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT></SPAN> </DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">On Mar 15, 2012, at 8:26 PM, Robert Green
wrote:</SPAN></FONT></DIV></DIV>
<DIV style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Well I think I
found the issue with the Jeti and the Plettenberg. The problem was
with the receiver. I recently got a new radio, and installed the new
rx in the plane, and then the issue started showing up. I even went
and borrowed a Jeti99Spin, to see if this would resolve the issue, but it
did not, so I started to think of everything that I had changed, and
decided to go back to my 8 channel receiver and voila, everything is back
to normal. Thanks to everyone for there input. Feels good to
have the problem behind me</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT color=navy size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt"></SPAN></FONT> </DIV>
<DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Tahoma><SPAN
style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Tahoma><SPAN style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A>
[<A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Robert
Campbell<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thursday,
March 15, 2012 8:38 AM<BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern
discussion<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC</SPAN></FONT></DIV></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">My suggestion to limit throttle isn't to limit
current draw. It's to limit the motor RPM's so the ESC can remain
synchronized with the motor. If the motor turns faster than the ESC
can handle, the motor will begin screeching. I've only seen this on
outrunners, never inrunners.</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Rob</SPAN></FONT></DIV></DIV>
<BLOCKQUOTE
style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<DIV>
<DIV class=MsoNormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">----- Original Message -----
</SPAN></FONT></DIV></DIV>
<DIV>
<DIV style="BACKGROUND: #e4e4e4" class=MsoNormal><B><FONT size=2
face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A
title=bob@toprudder.com href="mailto:bob@toprudder.com">Bob Richards</A>
</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">To:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">General pattern
discussion</A> </SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Sent:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">
Thursday, March 15, 2012 7:55 AM</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Subject:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Re:
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<TABLE class=MsoNormalTable border=0 cellSpacing=0 cellPadding=0>
<TBODY>
<TR>
<TD
style="PADDING-BOTTOM: 0in; PADDING-LEFT: 0in; PADDING-RIGHT: 0in; PADDING-TOP: 0in"
vAlign=top>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">That was my thought. I don't understand
why one would want to limit the throttle to something less than
full. Why not install a prop that loads the motor
less?</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">Bob R.</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"><BR><BR>--- On <B><SPAN
style="FONT-WEIGHT: bold">Thu, 3/15/12, Peter Vogel <I><SPAN
style="FONT-STYLE: italic"><<A
href="mailto:vogel.peter@gmail.com">vogel.peter@gmail.com</A>></SPAN></I></SPAN></B>
wrote:</SPAN></FONT></DIV></DIV>
<BLOCKQUOTE
style="BORDER-BOTTOM: medium none; BORDER-LEFT: #1010ff 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN-TOP: 5pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; MARGIN-BOTTOM: 5pt; MARGIN-LEFT: 3.75pt; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<DIV style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"><BR>From:
Peter Vogel <<A
href="mailto:vogel.peter@gmail.com">vogel.peter@gmail.com</A>><BR>Subject:
Re: [NSRCA-discussion] Plettenberg 30-10 evo and Jeti ESC<BR>To:
" General pattern discussion " <<A
href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><BR>Cc:
"General patterndiscussion" <<A
href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><BR>Date:
Thursday, March 15, 2012, 12:15 AM</SPAN></FONT></DIV>
<DIV id=yiv312173478>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">Limiting throttle does NOT limit current
to the motor, in fact, it can cause higher current draw.
All throttle does is vary the on vs off cycle during which
voltage is sent to the motor. </SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">Peter+<BR><BR>Sent from my
iPhone4S</SPAN></FONT></DIV></DIV>
<DIV>
<DIV style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt"><BR>On Mar
14, 2012, at 7:29 PM, "Robert Green" <<A
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=robcase1@cox.net"
target=_blank>robcase1@cox.net</A>>
wrote:</SPAN></FONT></DIV></DIV>
<BLOCKQUOTE style="MARGIN-TOP: 5pt; MARGIN-BOTTOM: 5pt"
type="cite">
<DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT color=navy size=2
face=Arial><SPAN
style="FONT-FAMILY: Arial; COLOR: navy; FONT-SIZE: 10pt">Hi
Rob, the Static amps on the ground is 81 amps. My
throttle is limited to 85 percent. Even changed out the
speed controller and the same thing happened.
Really wish i knew what was going
on?</SPAN></FONT></DIV></DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal
align=center><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=yiv312173478msonormal><B><FONT size=2
face=Tahoma><SPAN
style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Tahoma><SPAN
style="FONT-FAMILY: Tahoma; FONT-SIZE: 10pt"> <A
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"
target=_blank>nsrca-discussion-bounces@lists.nsrca.org</A> [<A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of
</SPAN></B>Robert Campbell<BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, March
14, 2012 9:18 PM<BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> General pattern
discussion<BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC</SPAN></FONT></DIV></DIV></BLOCKQUOTE></DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Robert,</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Which Jeti are you
running? Advance or Spin? Just a guess, but all
the outrunners I've run require low timing advance and some
require fixed end points and the throttle to be limited to 70
percent or so. Also, have your checked your set-up on a
watt meter? Sometimes our set-ups pull more current than
we were expecting and the ESC over current protection kicks
in.</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Hope this
helps.</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Rob</SPAN></FONT></DIV></DIV>
<BLOCKQUOTE
style="BORDER-BOTTOM: medium none; BORDER-LEFT: black 1.5pt solid; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; BORDER-TOP: medium none; BORDER-RIGHT: medium none; PADDING-TOP: 0in">
<DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">----- Original
Message ----- </SPAN></FONT></DIV></DIV>
<DIV>
<DIV style="BACKGROUND: #e4e4e4"
class=yiv312173478msonormal><B><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">From:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A
title=robcase1@cox.net
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=robcase1@cox.net"
target=_blank>Robert Green</A> </SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><B><FONT size=2
face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">To:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> <A
title=nsrca-discussion@lists.nsrca.org
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=nsrca-discussion@lists.nsrca.org"
target=_blank>'General pattern discussion'</A>
</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><B><FONT size=2
face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Sent:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt"> Wednesday, March
14, 2012 8:19 PM</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><B><FONT size=2
face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt; FONT-WEIGHT: bold">Subject:</SPAN></FONT></B><FONT
size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">
[NSRCA-discussion] Plettenberg 30-10 evo and Jeti
ESC</SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">Is anyone out
there running this combo. Went flying today, and had
some issue with the speed controller cutting out when i was
setting up for my approach into the pattern. I was
pulling up and advanced the throttle to do an reverse cuban
eight to get into my pattern, when the motor suddenly
quit. I pulled the throttle back and advanced it once
again and the motor came back it did this on every flight
except the first flight where i had no issues
whatsoever. my setting are high timing for the motor,
low cut off voltage, acceleration high,</SPAN></FONT> </DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
</SPAN></FONT></DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
</SPAN></FONT></DIV>
<DIV class=yiv312173478msonormal><FONT size=2 face=Arial><SPAN
style="FONT-FAMILY: Arial; FONT-SIZE: 10pt">thnaks in
advance</SPAN></FONT> </DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal
align=center><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=yiv312173478msonormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"
target=_blank>NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
</SPAN></FONT></DIV></BLOCKQUOTE></BLOCKQUOTE>
<BLOCKQUOTE style="MARGIN-TOP: 5pt; MARGIN-BOTTOM: 5pt"
type="cite">
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"
target=_blank>NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></DIV></DIV></BLOCKQUOTE>
<DIV style="MARGIN-BOTTOM: 12pt" class=MsoNormal><FONT size=3
face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"><BR>-----Inline Attachment
Follows-----</SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="http://us.mc1616.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"
target=_blank>NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></DIV></DIV></TD></TR></TBODY></TABLE>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT
size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></DIV></BLOCKQUOTE></DIV></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></DIV></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </DIV></DIV></DIV></DIV></DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT size=3 face="Times New Roman"><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
</SPAN></FONT></DIV>
<DIV style="TEXT-ALIGN: center" class=MsoNormal align=center><FONT size=3
face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">
<HR align=center SIZE=2 width="100%">
</SPAN></FONT></DIV>
<DIV><FONT size=3 face="Times New Roman"><SPAN style="FONT-SIZE: 12pt">No
virus found in this message.<BR>Checked by AVG - <A
href="http://www.avg.com/" target=_blank>www.avg.com</A><BR>Version:
2012.0.1913 / Virus Database: 2114/4873 - Release Date:
03/15/12</SPAN></FONT></DIV></BLOCKQUOTE></DIV>
<DIV>
<HR>
<DIV></DIV>_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"
target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
<DIV>
<HR>
<DIV></DIV><A></A>
<DIV align=left>No virus found in this message.<BR>Checked by AVG - <A
href="http://www.avg.com/" target=_blank>www.avg.com</A><BR>Version:
2012.0.1913 / Virus Database: 2114/4873 - Release Date:
03/15/12</DIV></DIV></DIV></BLOCKQUOTE></DIV><!-- end of AOLMsgPart_2_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 -->
<DIV
style="BACKGROUND-COLOR: #fff; MARGIN: 0px; FONT-FAMILY: Tahoma, Verdana, Arial, Sans-Serif; COLOR: #000; FONT-SIZE: 12px"
id=AOLMsgPart_3_e86c8f37-8d1d-486c-8fd8-eec38c063bf2><PRE style="FONT-SIZE: 9pt"><TT>_______________________________________________
NSRCA-discussion mailing list
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
</TT></PRE></DIV><!-- end of AOLMsgPart_3_e86c8f37-8d1d-486c-8fd8-eec38c063bf2 --></DIV></FONT>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>