And, of course, with a non-switching BEC off a 10s or even a 5s pack you would have massive heat issues as it tries to step down the voltage from 18.5 volts to 7.2 or 6 volts, depending on whether you are running an HV or standard voltage setup, so the regulator would probably need a fan or heat sink of some sort, which likely negates any weight savings from not running with a second battery.<div>
<br></div><div>Peter+<br><br><div class="gmail_quote">On Mon, Jan 23, 2012 at 2:30 PM, Scott McHarg <span dir="ltr"><<a href="mailto:scmcharg@gmail.com">scmcharg@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
You have to be careful using the BEC, especially from CC because it is a switching regulator which cannot be run in parallel. It's really best not to use the BEC and set up a truly separate system.<br><br>Scott<div class="HOEnZb">
<div class="h5"><br><br>
<div class="gmail_quote">On Mon, Jan 23, 2012 at 4:28 PM, George Kennie <span dir="ltr"><<a href="mailto:geobet4evr@gmail.com" target="_blank">geobet4evr@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>Could a CC BEC also be used instead of a reg.? I don't know how much curent is passed by a reg. </div><div>Sounds good cause it's a bummer trying to solder an extra lead to the Deans.</div><div> </div><div>G.<br>
<br></div><div class="gmail_quote"><div><div>On Mon, Jan 23, 2012 at 5:09 PM, Scott McHarg <span dir="ltr"><<a href="mailto:scmcharg@gmail.com" target="_blank">scmcharg@gmail.com</a>></span> wrote:<br></div>
</div><blockquote style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid" class="gmail_quote"><div><div>
Guys,<br> Chris Moon just e-mailed me about some leads that were done at the factory. These leads run off your balance leads to a voltage regulator and allow your main battery pack to be utilized as a redundant receiver battery. It is NOT meant to be a primary but it will save 20+ grams if you're running 2 rx batteries. You still have to run the 2nd regulator for true redundancy but you eliminate the 2nd battery. These leads are factory made and eliminate the need to make them yourself with the concern about plugging in to the wrong cell. I know in my article, I was pretty much against doing this as a backup but, with Chris having this made at the factory, he has all but eliminated making a mistake by tying to the wrong cell. I have the link that I'll e-mail you off-list or you can just go to his website. I don't want to break the NSRCA list rules by advertising for him even though he advertises with the NSRCA. The leads are only $3.99 each and are found under the Connectors/Adapters listing.<br>
<br>Thank,<br>Scott<span><font color="#888888"><br clear="all"><br>-- <br><b style="color:rgb(51,51,255)"><font style="font-family:comic sans ms,sans-serif" size="4">Scott A. McHarg</font></b><br><br>
</font></span><br></div></div>_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org" target="_blank">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br></blockquote></div><br>
<br>_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org" target="_blank">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br></blockquote></div><br><br clear="all"><br></div></div><span class="HOEnZb"><font color="#888888">-- <br>
<b style="color:rgb(51,51,255)"><font style="font-family:comic sans ms,sans-serif" size="4">Scott A. McHarg</font></b><br>
<br>
</font></span><br>_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div>Director, Fixed Wing Flight Training</div>
<div>Santa Clara County Model Aircraft Skypark</div><img src="http://farm8.staticflickr.com/7163/6513778381_5569cc985d_m.jpg"><br><br>
</div>