<font color='black' size='2' face='Arial, Helvetica, sans-serif'><span class="Apple-style-span" style="font-size: small;">I believe he was talking about the initial weigh-in before any flying.</span>
<div><span class="Apple-style-span" style="font-size: small;"><br>
</span></div>
<div><span class="Apple-style-span" style="font-size: small;">There were also significant problems with the weighing equipment, facilities, and procedures at site 4 that RVP was alluding to. That was not pretty.<br>
</span><br>
<div style="clear:both"><font color="black" size="2" face="Arial, Helvetica, sans-serif"><font color="black" face="arial" size="2">Jon Lowe</font></font></div>
<br>
<br>
<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Ron Hansen <rcpilot@wowway.com><br>
To: 'General pattern discussion' <nsrca-discussion@lists.nsrca.org><br>
Sent: Thu, Aug 19, 2010 6:33 pm<br>
Subject: Re: [NSRCA-discussion] weight difference<br>
<br>
<div id="AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021">
<style>#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 td{color: black;} @font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;} #AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 p.MsoNormal,#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 li.MsoNormal,#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";}#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 a:link,#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 span.MsoHyperlink {color:blue; text-decoration:underline;}#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 a:visited,#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 span.MsoHyperlinkFollowed {color:blue; text-decoration:underline;}#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 span.EmailStyle17 {font-family:Arial; color:navy;}@page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in;}#AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 div.Section1 {page:Section1;}</style>
<div class="Section1">
<div class="MsoNormal"><font size="2" color="navy" face="Arial"><span style="font-size: 10.0pt;font-family:Arial;color:navy">What does mods mean. Once you fly a round
overweight you should be disqualified not given an opportunity to lighten the
load.</span></font></div>
<div class="MsoNormal"><font size="2" color="navy" face="Arial"><span style="font-size: 10.0pt;font-family:Arial;color:navy"> </span></font></div>
<div class="MsoNormal" style="margin-left:.5in"><font size="2" face="Tahoma"><span style="font-size:10.0pt;font-family:Tahoma">-----Original Message-----<br>
<b><span style="font-weight:bold">From:</span></b> <a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>
[<a href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</a>] <b><span style="font-weight: bold">On Behalf Of </span></b>Derek Koopowitz<br>
<b><span style="font-weight:bold">Sent:</span></b> Thursday, August 19, 2010
7:30 PM<br>
<b><span style="font-weight:bold">To:</span></b> General pattern discussion<br>
<b><span style="font-weight:bold">Subject:</span></b> Re: [NSRCA-discussion]
weight difference</span></font></div>
<div class="MsoNormal" style="margin-left:.5in"><font size="3" face="Times New Roman"><span style="font-size:12.0pt"> </span></font></div>
<div>
<div class="MsoNormal" style="margin-left:.5in"><font size="3" face="Times New Roman"><span style="font-size:12.0pt">There were a couple that were overweight but after
mods they made weight. <br>
<br>
Sent from my iPhone</span></font></div>
</div>
<div>
<div class="MsoNormal" style="margin-right:0in;margin-bottom:12.0pt;margin-left: .5in"><font size="3" face="Times New Roman"><span style="font-size:12.0pt"><br>
On Aug 19, 2010, at 12:29 PM, Tim Taylor <<a href="mailto:timsautopro@yahoo.com">timsautopro@yahoo.com</a>> wrote:</span></font></div>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt" type="cite">
<div>
<table class="MsoNormalTable" border="0" cellspacing="0" cellpadding="0" width="576" style="width:6.0in;margin-left:.5in">
<tbody><tr>
<td valign="top" style="padding:0in 0in 0in 0in">
<div>
<div class="MsoNormal"><font size="3" face="Times New Roman"><span style="font-size:12.0pt">At the Nats they weighed every airplane IIRC. Did
any fail?</span></font></div>
</div>
<div>
<div class="MsoNormal"><font size="3" face="Times New Roman"><span style="font-size:12.0pt"> </span></font></div>
</div>
<div>
<div class="MsoNormal"><font size="3" face="Times New Roman"><span style="font-size:12.0pt">Tim<br>
<br>
--- On <b><span style="font-weight:bold">Thu, 8/19/10, Ron Van Putte <i><span style="font-style:italic"><<a href="mailto:vanputte@cox.net">vanputte@cox.net</a>></span></i></span></b>
wrote:</span></font></div>
</div>
<blockquote style="border:none;border-left:solid #1010FF 1.5pt;padding:0in 0in 0in 4.0pt; margin-left:3.75pt;margin-top:5.0pt;margin-bottom:5.0pt">
<div class="MsoNormal" style="margin-bottom:12.0pt"><font size="3" face="Times New Roman"><span style="font-size:12.0pt"><br>
From: Ron Van Putte <<a href="mailto:vanputte@cox.net">vanputte@cox.net</a>><br>
Subject: Re: [NSRCA-discussion] weight difference<br>
To: "General pattern discussion" <<a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>><br>
Date: Thursday, August 19, 2010, 3:16 PM</span></font></div>
<div>
<div class="MsoNormal"><font size="3" face="Times New Roman"><span style="font-size:12.0pt">I will be happy to bring my calibrated weights and
my digital scales. I will also demonstrate that Houston Schweitzer's
Aggressor weighs neither 11 lb 4 oz nor the 10 lb 6 oz, that the informal
weighings of his airplane at the Nats indicated. I have not weighed his
airplane since right before we left for the Nats and it was 10 lb 15 oz
then. Anybody want to bet me a beer that his airplane's weight is
closer to either of the two weights from the former weighings or the latter
weighing?<br>
<br>
Ron<br>
<br>
On Aug 19, 2010, at 1:36 PM, Jon Lowe wrote:<br>
<br>
> Maybe we will weigh everyone at the upcoming RCRC event. BTW, if
someone protests, the CD should be prepared to weigh airplanes. Just
because we generally don't, doesn't mean we can't. Hey, RVP, bring your
calibrated weights up!<br>
> <br>
> I don't know of a single instance at the Nats, or anywhere else this
year, where weight was a factor in safety. The planes are
built plenty strong enough. Electrics are readily built in the low to
mid 10 lb range now with modern, electric only designs. As for landing
gears, Dave Lockhart is right; it is the design of the gear attachment
problem, not a weight issue. And pattern airplanes are about the
easiest airplanes there are to land anyway. If you can't land well
enough to avoid tearing a gear out, learn! As my Dad used to
say, models are designed to fly, not crash.<br>
> <br>
> It seems the biggest bitching comes from those who are thinking about
going electric, not those who have been there for awhile. I see no
problem of giving sportsman thru advanced a break of a few ounces, but by the
time you are in masters, you are going to want good equipment.<br>
> <br>
> Jon Lowe<br>
> <br>
> <br>
> -----Original Message-----<br>
> From: Atwood, Mark <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=atwoodm@paragon-inc.com"></a><a href="mailto:atwoodm@paragon-inc.com">atwoodm@paragon-inc.com</a>><br>
> To: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=chad@f3acanada.org"></a><a href="mailto:chad@f3acanada.org">chad@f3acanada.org</a>
<<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=chad@f3acanada.org"></a><a href="mailto:chad@f3acanada.org">chad@f3acanada.org</a>>;
General pattern discussion <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion@lists.nsrca.org"></a><a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a>><br>
> Sent: Thu, Aug 19, 2010 12:38 pm<br>
> Subject: Re: [NSRCA-discussion] weight difference<br>
> <br>
> #AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a td{color: black;}
@font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2
4;}@font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;}@font-face
{font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;}@font-face
{font-family:Verdana; panose-1:2 11 6 4 3 5 4 4 2 4;}
#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a p.MsoNormal,#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
li.MsoNormal,#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:12.0pt;
font-family:"Times New Roman","serif";}#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
a:link,#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a span.MsoHyperlink
{mso-style-priority:99; color:blue;
text-decoration:underline;}#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
a:visited,#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
span.MsoHyperlinkFollowed {mso-style-priority:99; color:purple;
text-decoration:underline;}#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
span.EmailStyle17 {mso-style-type:personal-reply;
font-family:"Calibri","sans-serif"; color:#1F497D;}#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a
.MsoChpDefault {mso-style-type:export-only;}@page Section1 {size:8.5in
11.0in; margin:1.0in 1.0in 1.0in
1.0in;}#AOLMsgPart_3_223f5f75-9075-49d5-b2ad-ac482272f05a div.Section1
{page:Section1;}<br>
> I’d argue further that those getting TO the finals should have done so
with legal airplanes. It’s too late after the fact to find out that
someone flew an illegal airplane all the way through the contest.<br>
> <br>
> That said, I think the point is VERY valid that the nats is the one and
only time most aircraft are checked. But the feedback that I
have heard OVER and OVER again when I reply that “you don’t have to worry
about weight at a local event” is “I WANT to be legal”<br>
> <br>
> People who compete want to know that they kicked your ass fair and
square. They want rules, and they want to follow them. I’ve seen
people advance classes that were nowhere near ready because they had pointed
out in a series of “weak” contests because they felt they had to follow the
rules. Who enforces or even tracks our points???<br>
> <br>
> Many people I’ve spoken to go to the nats expecting…WANTING to be held
to a more formal standard. If the Nats was just another local casual
contest they would be disappointed, especially if its their first nats.
They want size, weight and noise to be enforced, as well as the timing
rules. When was the last time we clocked flights at a local
event? It’s really pretty easy to go over 8min in FAI.<br>
> <br>
> I think the fact that we don’t weigh at local events is probably
good. Encourages people to come and not be so stressed. But most
want to be legal because they aspire to be in the top 5 of their class.<br>
> <br>
> Not to digress but I often wondered how the Federal Estate tax…which
impacts less than 10% of the population gets ANY support for being repealed
since so few actually pay it?? My congressman’s reply…
“Because many people aspire to having to pay it…”<br>
> <br>
> Mark Atwood<br>
> Paragon Consulting, Inc. | President<br>
> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124<br>
> Phone: 440.684.3101 x102 | Fax: 440.684.3102<br>
> <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=mark.atwood@paragon-inc.com"></a><a href="mailto:mark.atwood@paragon-inc.com">mark.atwood@paragon-inc.com</a>
| <a target="_blank" href="http://www.paragon-inc.com"></a><a target="_blank" href="http://www.paragon-inc.com">www.paragon-inc.com</a><br>
> <br>
> From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>
[mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]
On Behalf Of Chad Northeast<br>
> Sent: Thursday, August 19, 2010 1:14 PM<br>
> To: General pattern discussion<br>
> Subject: Re: [NSRCA-discussion] weight difference<br>
> <br>
> "And at the<br>
> > Nats, the only planes that should be weighed are the top 4 F3A<br>
> > places. Let's forget about weighing any of the others. Just do a<br>
> > size check and that's all."<br>
> <br>
> Not really acceptable, in the FAI finals its a new contest, the top 4
going into the finals, could be the bottom 4 after the finals. You need
to process everyone that is in the finals to ensure they are all legal, as
there is no way to predict the results.<br>
> <br>
> It would be sad if you processed the top 4 from the semi's, and during
the finals a 5th person made the team who was not processed, and was found to
be flying an illegal model.<br>
> <br>
> Chad<br>
> <br>
> <br>
> ----- Original Message -----<br>
> From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=rcmaster199@aol.com"></a><a href="mailto:rcmaster199@aol.com">rcmaster199@aol.com</a><br>
> Date: Thursday, August 19, 2010 10:25 am<br>
> Subject: Re: [NSRCA-discussion] weight difference<br>
> To: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion@lists.nsrca.org"></a><a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a><br>
> <br>
> > Yes Mike I can carry an extra pound or two in the van. I don't<br>
> > want to. So I do everything I can to make my planes less than 5<br>
> > kilos. Easier on my joints too.<br>
> ><br>
> > As far as local contest weigh in is concerned....I agree.<br>
> > Therefore it seems to me that at least 50% of the folks that<br>
> > don't attend the Nats may be flying heavier than max airplanes<br>
> > and none's the wiser. Fine with me. It also seems to me the main<br>
> > point for increasing the weight limit is so that people can be<br>
> > "legal" at the US Nats.<br>
> ><br>
> > Truth is that there are only 4 people that truly have use 5 kilo<br>
> > of less airplanes: the team that will represent us at the WC.<br>
> > The rest of us can have a variable weight and it's not a big<br>
> > deal, except, if the rule was relaxed, it will open the can of<br>
> > worms of escalating cost once again. Dave Lockhart had a good<br>
> > review of how that process works a couple years ago, so it makes<br>
> > no sense to rehash old stuff<br>
> ><br>
> > In my view, I would prefer that the rule remain in an effort to<br>
> > control cost to the current (admitedly high) level. And at the<br>
> > Nats, the only planes that should be weighed are the top 4 F3A<br>
> > places. Let's forget about weighing any of the others. Just do a<br>
> > size check and that's all.<br>
> ><br>
> > Finally, if we were to relax the weight limit to say 12 lbs give<br>
> > or take, okay fine, make sure planes were made from balsa and<br>
> > ply. Fiberglass to be used only to finish not to build composite<br>
> > strength. In fact about the only composite parts allowed should<br>
> > be wing and stab joiners and gear/pants. In other words, make a<br>
> > good attempt to control cost.<br>
> ><br>
> > We have got to get cost under control in my view or the sport<br>
> > will become too expensive for most. It may be too expensive for<br>
> > most right now<br>
> ><br>
> > My 2 1/2 cents<br>
> ><br>
> > Matt<br>
> ><br>
> ><br>
> ><br>
> > -----Original Message-----<br>
> > From: Dr Mike <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=drmikedds@sbcglobal.net"></a><a href="mailto:drmikedds@sbcglobal.net">drmikedds@sbcglobal.net</a>><br>
> > To: 'General pattern discussion' <nsrca-<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion@lists.nsrca.org"></a><a href="mailto:discussion@lists.nsrca.org">discussion@lists.nsrca.org</a>>Sent:
Thu, Aug 19, 2010 10:58 am<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > Matt, I agree with the size restriction, but I think you and<br>
> > your van could carry another 2 pounds>heck we have guys<br>
> > flying 12+pound planes at local contests all the time. When is<br>
> > the last time someone weighed an airplane at a local contest?<br>
> > When is the last time anyone enforced that rule? Practically<br>
> > speaking the weight limit is academic.<br>
> > Mike<br>
> ><br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>
[<a href="mailto:nsrca-?">mailto:nsrca-</a><br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion-bounces@lists.nsrca.org"></a><a href="mailto:discussion-bounces@lists.nsrca.org">discussion-bounces@lists.nsrca.org</a>]
On Behalf Of <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=rcmaster199@aol.com"></a><a href="mailto:rcmaster199@aol.com">rcmaster199@aol.com</a><br>
> > Sent: Thursday, August 19, 2010 8:46 AM<br>
> > To: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion@lists.nsrca.org"></a><a href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</a><br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> ><br>
> > A 2 meter, 5 kilo plane is about my physical max. I physically<br>
> > have a difficult time getting something larger in the minivan.<br>
> > At one time I dabbled in 1/3 scale IMAC but that proved too big<br>
> > and too heavy to haul around....just a plain pain in tuchous<br>
> > (can I say 'tuchous' in this forum?)<br>
> ><br>
> ><br>
> ><br>
> > Besides, I find it great fun to figure out how to make a 2meter,<br>
> > 5 kilo plane come out at 4.5 kilos....don't you?<br>
> ><br>
> > MattK<br>
> ><br>
> ><br>
> ><br>
> > -----Original Message-----<br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=ronlock@comcast.net"></a><a href="mailto:ronlock@comcast.net">ronlock@comcast.net</a><br>
> > To: General pattern discussion <nsrca-<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion@lists.nsrca.org"></a><a href="mailto:discussion@lists.nsrca.org">discussion@lists.nsrca.org</a>>Sent:
Thu, Aug 19, 2010 9:29 am<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> > An excellent discussion - especially the "unintended<br>
> > consequences" part. Thanks for the diatribe
Mark !<br>
> ><br>
> ><br>
> ><br>
> > I think we should be particularly sensitive to an increase in<br>
> > AMA weight standard resulting (in a couple of years) in larger<br>
> > designs that take up more room, cost more, and are no<br>
> > longer compatible with F3A.<br>
> ><br>
> ><br>
> ><br>
> > Ron Lockhart<br>
> ><br>
> > Dist II CB<br>
> ><br>
> ><br>
> ><br>
> ><br>
> > ----- Original Message -----<br>
> > From: "Mark Atwood" <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=atwoodm@paragon-inc.com"></a><a href="mailto:atwoodm@paragon-inc.com">atwoodm@paragon-inc.com</a>><br>
> > To: "General pattern discussion" <nsrca-<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion@lists.nsrca.org"></a><a href="mailto:discussion@lists.nsrca.org">discussion@lists.nsrca.org</a>>Sent:
Thursday, August 19, 2010<br>
> > 9:05:03 AM<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > The challenge here is that rules of this nature, limiting rules,<br>
> > be it in Pattern, Sailing, Stock car, whatever, are NOT in place<br>
> > to restrict the average guy, they’re in place to restrict the<br>
> > innovator. The guys that push the limit.<br>
> ><br>
> ><br>
> ><br>
> > In our sport, the “average” guy is stuck pushing the limit<br>
> > because he’s trying to copy and follow the innovators. We all<br>
> > want the triple volumetric 2 meter bird because that’s what<br>
> > Chip/Andrew/Quique and company have pushed the boundary’s too.<br>
> > A prophecy still makes weight with nooooo problem.<br>
> ><br>
> ><br>
> ><br>
> > So the problem is simple. IF the rules change, it clearly
will<br>
> > help the average guy for a year or two. But then the
innovators<br>
> > will once again push the limits (they wouldn’t BE limits if no<br>
> > one was pushing) and we would see new designs that the average<br>
> > guy can’t easily keep within the rules.<br>
> ><br>
> ><br>
> ><br>
> > Bipes have not really caught on because they’re too difficult to<br>
> > make weight with. Only the very best builders with very few<br>
> > limits on funding for all the best and lightest equipment have<br>
> > made them work. Add a pound and that will very likely
change…to<br>
> > where all the top guys can make them work, which will then push<br>
> > the average guy to try and make them work. At the
end of the<br>
> > day, all it adds is cost as we obsolete a whole generation of<br>
> > viable aircraft to the dumpster.<br>
> ><br>
> ><br>
> ><br>
> > All one needs to do for confirmation on that is to review the<br>
> > evolution of aircraft that occurred when we removed the LAST<br>
> > limiter…engine displacement. Prior to that, weight
was only a<br>
> > secondary limiter because displacement restricted how big of a<br>
> > plane you could carry around. Once removed, we had 10 years
of<br>
> > growing aircraft and growing engines. All costing more, NOT<br>
> > just because the new stuff was more expensive…that’s just<br>
> > natural inflation and evolution, but because the lifespan of a<br>
> > model was shorter. Designs changed SIGNIFICANTLY
every year.<br>
> ><br>
> ><br>
> ><br>
> > Finally, we’re back to a semi stable development cycle which has<br>
> > aircraft like the Integral enjoying a 5-6 year run and is still<br>
> > considered competitive even in FAI (I believe that’s what Pete<br>
> > Collinson flew in the finals this year).<br>
> ><br>
> ><br>
> ><br>
> > It’s not that we’re not listening… We’re simply trying to
avoid<br>
> > mistakes from the past and make as sure as we can that the rule<br>
> > changes won’t have disastrous unintended consequences.<br>
> ><br>
> ><br>
> ><br>
> > The rule change that is currently on the ballot provides a<br>
> > sizeable variance for those in the lower classes to help<br>
> > accommodate aging aircraft (which seem to gain weight<br>
> > magically), repaired used aircraft, and beginning<br>
> > builders….without changing the goal (and therefore the designers<br>
> > goal) of maintaining a 5KG weight limit.<br>
> ><br>
> ><br>
> ><br>
> > Ok…off my soapbox. Sorry for the diatribe.<br>
> ><br>
> ><br>
> ><br>
> > -Mark<br>
> ><br>
> > CB for Dist 3<br>
> ><br>
> ><br>
> ><br>
> > Mark Atwood<br>
> ><br>
> > Paragon Consulting, Inc. | President<br>
> ><br>
> > 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124<br>
> ><br>
> > Phone: 440.684.3101 x102 | Fax: 440.684.3102<br>
> ><br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=mark.atwood@paragon-inc.com"></a><a href="mailto:mark.atwood@paragon-inc.com">mark.atwood@paragon-inc.com</a>
| <a target="_blank" href="http://www.paragon-inc.com"></a><a target="_blank" href="http://www.paragon-inc.com">www.paragon-inc.com</a><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>
[<a href="mailto:nsrca-?">mailto:nsrca-</a><br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion-bounces@lists.nsrca.org"></a><a href="mailto:discussion-bounces@lists.nsrca.org">discussion-bounces@lists.nsrca.org</a>]
On Behalf Of Dr Mike<br>
> > Sent: Thursday, August 19, 2010 8:42 AM<br>
> > To: 'General pattern discussion'<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > Lance,<br>
> ><br>
> > Regarding the CB, I agree with you that those generalities are<br>
> > anal comments. Most of the guys are giving freely of their
time<br>
> > and we are lucky to have them. On the weight issue, the 11<br>
> > pounds is a bit restricting. When that rule was made, planes<br>
> > had a 60 inch span, were 48 inches long and weighed 7 lbs.
now<br>
> > they are volumetrically double or triple so the wing loading is<br>
> > the same or lighter. Needs to go up at least a pound or two.<br>
> ><br>
> > Mike<br>
> ><br>
> ><br>
> ><br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>
[<a href="mailto:nsrca-?">mailto:nsrca-</a><br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion-bounces@lists.nsrca.org"></a><a href="mailto:discussion-bounces@lists.nsrca.org">discussion-bounces@lists.nsrca.org</a>]
On Behalf Of Patterndude<br>
> > Sent: Wednesday, August 18, 2010 8:35 PM<br>
> > To: General pattern discussion<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > I have a 10 lb e-symphony, there are low 10 lb Evo's and both<br>
> > these planes are super rigid an tough. There are e planes that<br>
> > I'm afraid to touch because of fragility and they cost more too.<br>
> > Point is, the consumer has choices and don't need to fly a<br>
> > dangerous airframe. They choose to. Remember the glow Impacts<br>
> > that lost their tail in a snap but hundreds were sold AFTER this<br>
> > fact was known on this list?<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > As a CB guy I don't like being generalized against. I ask for<br>
> > input all the time. Even call people and tell people where my<br>
> > head is at all the time without preaching.<br>
> ><br>
> > Sent from my iPhone<br>
> ><br>
> ><br>
> ><br>
> > On Aug 18, 2010, at 8:11 PM, Tim Taylor<br>
> > <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=timsautopro@yahoo.com"></a><a href="mailto:timsautopro@yahoo.com">timsautopro@yahoo.com</a>> wrote:<br>
> ><br>
> ><br>
> > We can always ignore it, we've done that for years unless you're<br>
> > in the top 3-5 at the Nats.<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > In this day and age of instant communication we no longer need a<br>
> > Contest Board to decide what we do or not. With all due respect<br>
> > to the CB we don't need you guys anymore, we can poll the<br>
> > membership directly and set the rules. Far more representative<br>
> > that way.<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > The only time I ever tried to talk to a CB member about a rules<br>
> > proposal in person I got the old "I know better than you and
I'm<br>
> > going to do what I want so we don't need to discuss it."
He<br>
> > then refused to even talk about anything at that point. Left a<br>
> > very bad taste I tell you.<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > Tim<br>
> > --- On Wed, 8/18/10, Dave Burton <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=burtona@atmc.net"></a><a href="mailto:burtona@atmc.net">burtona@atmc.net</a>>
wrote:<br>
> ><br>
> ><br>
> ><br>
> > From: Dave Burton <<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=burtona@atmc.net"></a><a href="mailto:burtona@atmc.net">burtona@atmc.net</a>><br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> > To: "'General pattern discussion'" <nsrca-<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion@lists.nsrca.org"></a><a href="mailto:discussion@lists.nsrca.org">discussion@lists.nsrca.org</a>>Date:
Wednesday, August 18, 2010,<br>
> > 7:53 PM<br>
> ><br>
> > The rules proposal to eliminate the weight limit didn't make the<br>
> > first CB<br>
> > vote. Too bad IMO!<br>
> > Dave<br>
> ><br>
> > -----Original Message-----<br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]
On Behalf Of<br>
> > Ron Hansen<br>
> > Sent: Wednesday, August 18, 2010 7:35 PM<br>
> > To: 'General pattern discussion'<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > I'm concerned that these new electric only planes that are<br>
> > designed to make<br>
> > weight won't hold up to the normal wear and tear of an average<br>
> > intermediateor advanced pilot or flying off of a rough grass<br>
> > runway. Is this a valid<br>
> > concern? I think so but maybe I'm over reacting. That
is why<br>
> > I'm in favor<br>
> > of eliminating the weight limit altogether. The proposal to<br>
> > slightly raise<br>
> > the weight limit won't allow someone to fly an electric Focus II
for<br>
> > example.<br>
> ><br>
> > -----Original Message-----<br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]
On Behalf Of J<br>
> > N Hiller<br>
> > Sent: Tuesday, August 17, 2010 2:17 PM<br>
> > To: General pattern discussion<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > I've been following this with interest. E-power is looking<br>
> > better all the<br>
> > time and I probably will make the change. I like to build prefer<br>
> > a wood<br>
> > airplane. About how much total weight is in a suitable E-power<br>
> > system or<br>
> > empty airframe ready for radio etc? Any numbers readily<br>
> > available would be<br>
> > helpful in understanding the distribution of weight.<br>
> > Thanks<br>
> > Jim Hiller<br>
> ><br>
> > -----Original Message-----<br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]On
Behalf Of Dave<br>
> > Sent: Tuesday, August 17, 2010 9:02 AM<br>
> > To: 'General pattern discussion'<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > And to recall.....that is the Spark with custom wings and stabs,<br>
> > which saves<br>
> > substantial weight? There are very few unmodified kits<br>
> > available that are<br>
> > RTF electric at 10.25. There are some airframe examples for<br>
> > which glow /<br>
> > electric are similar weight, but that is not the norm - not yet<br>
> > anyway - my<br>
> > opinion.<br>
> ><br>
> > My electric Bravo was 10 lbs even at the 2009 NATs (only 4 oz<br>
> > more than the<br>
> > Vivat I flew in 2005) and I would be scared of the structure if<br>
> > it were any<br>
> > lighter. Of course it could be lighter still IF I went from<br>
> > 5000 to 4350<br>
> > lipos (~6 oz) and ditched the dual RX batts and Vregs (~2 oz)<br>
> > and used<br>
> > lighter ESC and wiring (~ 2 oz).<br>
> ><br>
> > Point being....even tho 10 lb electrics are possible, and<br>
> > becoming more<br>
> > common, it is still pretty easy to build electrics at 11+ lbs
without<br>
> > careful planning and attention to detail. I think it will<br>
> > become a<br>
> > non-issue soon enough.....even in Europe and Asia electrics are<br>
> > coming on<br>
> > strong.....so the glow kits will become increasingly scarce.<br>
> ><br>
> > Regards,<br>
> ><br>
> > Dave<br>
> ><br>
> > -----Original Message-----<br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]
On Behalf Of<br>
> > Atwood, Mark<br>
> > Sent: Tuesday, August 17, 2010 10:06 AM<br>
> > To: General pattern discussion<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > I would argue that you can't "disregard" the airframe
given that<br>
> > an all<br>
> > electric airframe is much lighter.<br>
> ><br>
> > My answer to the question? There is almost no
difference. I'm<br>
> > flying a<br>
> > full 2M plane that weighs 10lbs 4oz with light batteries, 10lbs,<br>
> > 8oz with<br>
> > very heavy batteries. My two Black Magics with
glow weighed<br>
> > 10lbs 6oz and<br>
> > 10lbs 8oz RTF minus CDI (add approx 4oz for that).<br>
> ><br>
> > I believe we're just now seeing full electric designs that are<br>
> > optimized for<br>
> > weight and are coming in light. Prior to that,
many of the<br>
> > designs still<br>
> > had unnecessary structure as a legacy from Glow. I'm pretty<br>
> > sure that<br>
> > evolution is not complete yet either.<br>
> ><br>
> ><br>
> ><br>
> > Mark Atwood<br>
> > Paragon Consulting, Inc. | President<br>
> > 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124<br>
> > Phone: 440.684.3101 x102 | Fax: 440.684.3102<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=mark.atwood@paragon-inc.com"></a><a href="mailto:mark.atwood@paragon-inc.com">mark.atwood@paragon-inc.com</a>
| <a target="_blank" href="http://www.paragon-inc.com"></a><a target="_blank" href="http://www.paragon-inc.com">www.paragon-inc.com</a><br>
> ><br>
> ><br>
> > -----Original Message-----<br>
> > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]
On Behalf Of<br>
> > Ron Van Putte<br>
> > Sent: Tuesday, August 17, 2010 9:58 AM<br>
> > To: General pattern discussion<br>
> > Subject: Re: [NSRCA-discussion] weight difference<br>
> ><br>
> > Tough question. Will you insist on using 30C lipos, when 20C
lipos<br>
> > are much lighter? Do you plan on using a particular motor?
Motor<br>
> > weights vary substantially. Some ESCs are a lot heavier than
others.<br>
> ><br>
> > My guess would be that the weight difference between a complete<br>
> > electric-power system and a complete glow-power system,
disregarding<br>
> > the airplane, would be 10-16 ounces.<br>
> ><br>
> > Ron<br>
> ><br>
> > On Aug 17, 2010, at 8:51 AM, Dr Mike wrote:<br>
> ><br>
> > > Ok so I am going to ask the question again... in your
estimation<br>
> > > what is the<br>
> > > difference in weight between the complete electric power<br>
> > system and<br>
> > > the<br>
> > > complete glow system-disregarding the airplane?<br>
> > > Mike<br>
> > ><br>
> > > -----Original Message-----<br>
> > > From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > > [mailto:<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a>]
On Behalf<br>
> > Of Ron<br>
> > > Van Putte<br>
> > > Sent: Tuesday, August 17, 2010 8:30 AM<br>
> > > To: General pattern discussion<br>
> > > Subject: Re: [NSRCA-discussion] weight difference<br>
> > ><br>
> > > Dave WAS trying to show the difference between glow and
electric.<br>
> > ><br>
> > > Generally, airplanes that started out as glow-powered are
heavier<br>
> > > than one for electric power, because of the vibration.
The<br>
> > > difference between the two packages gets complicated.
For<br>
> > glow, you<br>
> > > include spinner, prop, engine, motor mount, ignition<br>
> > system, fuel<br>
> > > tubing (and fittings), fuel tank and anything else which is<br>
> > > exclusively for glow. For electric, you include spinner,
prop,<br>
> > > motor, motor mount, ESC, wiring, lipo batteries and<br>
> > anything else<br>
> > > which is exclusively for electric. When you add it up,
the<br>
> > weight> differences can be pretty dramatic. If you don't<br>
> > carefully select<br>
> > > all the components, you can easily add an unneeded 4 ounces<br>
> > to an<br>
> > > electric-powered airplane.<br>
> > ><br>
> > > Ron<br>
> > ><br>
> > > On Aug 17, 2010, at 7:49 AM, Dr Mike wrote:<br>
> > ><br>
> > >> Thanks Dave, I am referring only to the power<br>
> > packages,not the<br>
> > >> planes. Those are what I am looking for, the difference<br>
> > between>> glow and electric.<br>
> > >><br>
> > >> Mike<br>
> > >><br>
> > >><br>
> > >><br>
> > >> From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [<a href="mailto:nsrca-?">mailto:nsrca-</a><br>
> > >> <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion-bounces@lists.nsrca.org"></a><a href="mailto:discussion-bounces@lists.nsrca.org">discussion-bounces@lists.nsrca.org</a>]
On Behalf Of Dave<br>
> > >> Sent: Tuesday, August 17, 2010 7:41 AM<br>
> > >> To: 'General pattern discussion'<br>
> > >> Subject: Re: [NSRCA-discussion] weight difference<br>
> > >><br>
> > >><br>
> > >><br>
> > >> 12 oz +/-4 oz.<br>
> > >><br>
> > >><br>
> > >><br>
> > >> Exact number depends on a bunch of things -<br>
> > >><br>
> > >> - on the electric side, which motor, motor mounting,<br>
> > ESC, lipo, RX<br>
> > >> power system?<br>
> > >><br>
> > >> - was the plane originally built lighter for electric,<br>
> > or with more<br>
> > >> beef for glow?<br>
> > >><br>
> > >> - CDI / non CDI, type of mount, and what type of<br>
> > ignition and RX<br>
> > >> power?<br>
> > >><br>
> > >><br>
> > >><br>
> > >> I can tell you that a number of Prestige planes have<br>
> > been built<br>
> > >> with various glow and electric power plants. For the<br>
> > most part,<br>
> > >> the glow airframes are +4 oz to start with (the added<br>
> > beef for glow<br>
> > >> vibration). Most of the glow setups ended up at 9.5<br>
> > lbs, +/- 4<br>
> > >> oz. Most of the electrics ended up at 10.25 lbs, +/-
4 oz.<br>
> > >><br>
> > >><br>
> > >><br>
> > >> Regards,<br>
> > >><br>
> > >><br>
> > >><br>
> > >> Dave<br>
> > >><br>
> > >> From: <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=nsrca-discussion-bounces@lists.nsrca.org"></a><a href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</a><br>
> > [<a href="mailto:nsrca-?">mailto:nsrca-</a><br>
> > >> <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=discussion-bounces@lists.nsrca.org"></a><a href="mailto:discussion-bounces@lists.nsrca.org">discussion-bounces@lists.nsrca.org</a>]
On Behalf Of Dr Mike<br>
> > >> Sent: Tuesday, August 17, 2010 8:33 AM<br>
> > >> To: 'General pattern discussion'<br>
> > >> Subject: [NSRCA-discussion] weight difference<br>
> > >><br>
> > >><br>
> > >><br>
> > >> Could someone tell me the difference in weight between<br>
> > say a YS 1.7<br>
> > >> with muffler/tank,etc vs electric?<br>
> > >><br>
> > >> Thanks<br>
> > >><br>
> > >> Mike<br>
> > >><br>
> > >> _______________________________________________<br>
> > >> NSRCA-discussion mailing list<br>
> > >> <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > >> <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> > ><br>
> > > _______________________________________________<br>
> > > NSRCA-discussion mailing list<br>
> > > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> > ><br>
> > > _______________________________________________<br>
> > > NSRCA-discussion mailing list<br>
> > > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> > __________ Information from ESET Smart Security, version of<br>
> > virus signature<br>
> > database 5374 (20100817) __________<br>
> ><br>
> > The message was checked by ESET Smart Security.<br>
> ><br>
> > <a target="_blank" href="http://www.eset.com/"></a><a target="_blank" href="http://www.eset.com">http://www.eset.com</a><br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> > No virus found in this incoming message.<br>
> > Checked by AVG - <a target="_blank" href="http://www.avg.com"></a><a target="_blank" href="http://www.avg.com">www.avg.com</a><br>
> > Version: 9.0.851 / Virus Database: 271.1.1/3079 - Release Date:<br>
> > 08/18/1014:35:00<br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > NSRCA-discussion mailing list<br>
> > <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________ NSRCA-discussion<br>
> > mailing list <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________ NSRCA-discussion<br>
> > mailing list <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> > <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> ><br>
> ><br>
> _______________________________________________ NSRCA-discussion mailing
list <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a>
<a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
> _______________________________________________<br>
> NSRCA-discussion mailing list<br>
> <a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
> <a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a><br>
<br>
_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a target="_blank" href="http://us.mc623.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.nsrca.org"></a><a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion"></a><a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></span></font></div>
</div>
</blockquote>
</td>
</tr>
</tbody></table>
<div class="MsoNormal" style="margin-left:.5in"><font size="3" face="Times New Roman"><span style="font-size:12.0pt"> </span></font></div>
</div>
</blockquote>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt" type="cite">
<div>
<div class="MsoNormal" style="margin-left:.5in"><font size="3" face="Times New Roman"><span style="font-size:12.0pt">_______________________________________________<br>
NSRCA-discussion mailing list<br>
<a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a><br>
<a target="_blank" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a></span></font></div>
</div>
</blockquote>
</div>
</div>
<!-- end of AOLMsgPart_3_a920591e-3ef8-4bad-833a-1b1267333021 -->
<div id="AOLMsgPart_4_a920591e-3ef8-4bad-833a-1b1267333021" style="margin: 0px;font-family: Tahoma, Verdana, Arial, Sans-Serif;font-size: 12px;color: #000;background-color: #fff;">
<pre style="font-size: 9pt;"><tt>_______________________________________________
NSRCA-discussion mailing list
<a href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</a>
<a href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target="_blank">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</a>
</tt></pre>
</div>
<!-- end of AOLMsgPart_4_a920591e-3ef8-4bad-833a-1b1267333021 -->
</div>
</div>
</font>