<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18702">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>What spinner adapter kit is best to use on the YS
170? They sent me the short shaft double jam nut kit, which requires that
you ream the front of the propr hub 3/8" deep, 1/2" diameter. This is for
"thick props" according to the instructions. I'm concerned that this may
really weaken the prop hub too much. I'm also not crazy about needing to
find a reamer for this at the last minute. Any good sources for that? It
seems like that would be custom made for this task, because the 1'2"D hole is
not the next size up from the existing hole in the hub, i.e., there's got to be
a smooth 10 mm guide section to keep the reaming tool aligned.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Ed</FONT></DIV></BODY></HTML>