<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<STYLE>.hmmessage P {
PADDING-RIGHT: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; PADDING-TOP: 0px
}
BODY.hmmessage {
FONT-SIZE: 10pt; FONT-FAMILY: Verdana
}
</STYLE>
<META content="MSHTML 6.00.6000.16735" name=GENERATOR></HEAD>
<BODY class=hmmessage bgColor=#ffffff>
<DIV><FONT face=Arial size=3>Hi Ed,</FONT></DIV>
<DIV><FONT face=Arial size=3>I've already done what you're doing. The tube and
socket set is a PBG and I copied the following from their web site:</FONT></DIV>
<DIV><FONT face=Arial size=3></FONT> </DIV>
<DIV><FONT face=Tahoma size=1>F3A Lightwall 30mm <FONT
face=Tahoma size=1>PBG36TS <FONT face=Tahoma size=1>30mm x 600mm -
Tube & Socket</FONT></FONT></FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=3>Make sure you get both the tube and socket. The
socket in the Integral is supposed to be 30mm but it's actually a little larger
to accommodate the tube that comes with the kit. You'll have to cut the socket
out of the fuse and replace it with the PBG. It's a lot easier than it looks. I
used a cut-off wheel on my dremel and cut the old socket out by placing the
cut-off wheel inside the socket just beyond the plywood donut that's bonded to
each side of the inside of the fuse. Then I used a sanding drum to sand off the
little section of socket that was still bonded to the inside of the plywood
support donut. Took about twenty minutes. I left the donut in place and
bonded the new socket to it with the new wings attached and everything lined up.
I got my original last year straight from PBG. Desert Aircraft had some this
year and I bought my second one from them. Radio South and some other dealers
also sell PBG tubes and sockets but I don't know if they stock the 30mm as it's
an unusual size. The part number I gave you is a special thin-walled, very light
set designed for our purposes. Don't use anything other than a cut-off wheel to
cut it as it splinters real easy which I discovered in the usual way. Hope
this helps.</FONT></DIV>
<DIV><FONT face=Arial size=3></FONT> </DIV>
<DIV><FONT face=Arial size=3>Verne Koester</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=ed_alt@hotmail.com href="mailto:ed_alt@hotmail.com">Ed Alt</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Discussion List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, November 18, 2008 12:07
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] DF Wing tube
for Integral</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial>I'm building an Integral with foam wing replacements and
have not yet been able to locate the correct size wing tube and socket.
Does anyone have the exact tube dimensions?</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Thanks</FONT></DIV>
<DIV><FONT face=Arial>Ed</FONT></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></BLOCKQUOTE></BODY></HTML>