Jim,<br>
<br>
I have no clue how you think all three axes can be initiated at the same time. You keep forgetting the part of the RULE, quoted verbatim below, that says the "fuselage break and separation from the flight path" must happen "BEFORE THE ROTATION IS STARTED". I'm NOT equating fueselage break to pitch break, it could break in pitch and/or yaw, if it doesn't start rotation at the same time. If you initiate all three axis at the same time, rotation WILL start at the same instant, and that is specifically NOT permitted. READ THE RULE! The judge MUST determine if the fuselage broke and separated from the flight path first, BEFORE the rotation started. If it didn't, he MUST severely downgrade.<br>
<br>
<br>
<div style="CLEAR: both">Jon Lowe</div>
<br>
<br>
-----Original Message-----<br>
From: Woodward, Jim (US SSA) <jim.woodward@baesystems.com><br>
To: General pattern discussion <nsrca-discussion@lists.nsrca.org><br>
Sent: Mon, 16 Jun 2008 12:37 pm<br>
Subject: Re: [NSRCA-discussion] Snap entry in FAI<br>
<br>
<div id=AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152>
<STYLE> @#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;} #AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 p.MsoNormal,#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 li.MsoNormal,#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";}#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 a:link,#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 span.MsoHyperlink {color:blue; text-decoration:underline;}#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 a:visited,#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 span.MsoHyperlinkFollowed {color:blue; text-decoration:underline;}#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 pre {margin:0in; margin-bottom:.0001pt; font-size:10.0pt; font-family:"Courier New";}#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 tt {font-family:"Courier New";}#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 span.EmailStyle19 {mso-style-type:personal-reply; font-family:Arial; color:navy;}@#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in;}#AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 div.Section1 {page:Section1;}</STYLE>
<div class=Section1>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Jon,</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> </SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">I’m shocked - you are totally wrong here. Do not equate “fuselage” to “pitch” in the reading of this definition. As a judge you should NOT apply a “pitch-assessment” pass/fail criteria to judging FAI snap rolls. It is completely rejected. The plane and therefore “fuselage” must autorotate about the flight axis, which means that the nose and tail of the plane will move in a conical fashion. The pilot can initiate with all 3 axis at one time. </SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> </SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">It is the responsibility of the judge to determine if autorotation occurred, and not determine how or in what order the pilot did it. </SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> </SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks,</SPAN></FONT><FONT color=navy><SPAN style="COLOR: navy"></SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Jim</SPAN></FONT><FONT color=navy><SPAN style="COLOR: navy"></SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></div>
<div class=MsoNormal><B><FONT face=Tahoma size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">From:</SPAN></FONT></B><FONT face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma"> <A href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A> [<A href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>] <B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Jon Lowe<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, June 16, 2008 1:21 PM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> <A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A><br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Snap entry in FAI</SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"> </SPAN></FONT></div>
<div class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">You are correct, as long as there is no roll induced at the same instant. I overlooked that possibility. Not sure how rudder alone will induce the "supposed to be in a stalled condition" though!! There are many attitudes (e.g. 45 down on center) where a judge could not likely see a rudder departure alone first, and thus conclude that departure did not occur before the roll departure started. And a judge might also not see a pitch departure first on a end box upline snap, but he could see rudder first. It is VERY clear that simultaneous roll with either or both of the other axes departures is NOT allowed as others have tried to state here. I did say that pitch and yaw departure could happen simutaneously, in my original post, as long as roll doesn't occur at the same time.</SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">Jon Lowe</SPAN></FONT></div>
</div>
<div class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"><br>
<br>
-----Original Message-----<br>
From: JShulman <<A href="mailto:jshulman@cfl.rr.com">jshulman@cfl.rr.com</A>><br>
To: General pattern discussion <<A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>><br>
Sent: Mon, 16 Jun 2008 11:22 am<br>
Subject: Re: [NSRCA-discussion] Snap entry in FAI</SPAN></FONT></div>
<div id=AOLMsgPart_3_02b65284-83ea-4950-beb7-d8726e751af5>
<div>
<div class=MsoNormal><FONT face=Arial color=blue size=3><SPAN style="FONT-SIZE: 12pt; COLOR: blue; FONT-FAMILY: Arial">Jon,</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"> </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT face=Arial color=blue size=3><SPAN style="FONT-SIZE: 12pt; COLOR: blue; FONT-FAMILY: Arial">I don't see where it says pitch break? Rudder first will show attitude break and separation from the flight path. So if one uses rudder and elevator first this is also correct.</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"> </SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal><FONT face="Times New Roman" size=2><SPAN style="FONT-SIZE: 10pt">Regards,<br>
Jason<br>
<A href="http://www.jasonshulman.com/" target=_blank>www.jasonshulman.com</A><br>
<A href="http://www.shulmanaviation.com/" target=_blank>www.shulmanaviation.com</A><br>
<A href="http://www.composite-arf.com/" target=_blank>www.composite-arf.com</A></SPAN></FONT> </div>
</div>
<BLOCKQUOTE style="MARGIN-TOP: 5pt; MARGIN-BOTTOM: 5pt; MARGIN-RIGHT: 0in">
<div class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original Message-----<br>
<B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> <A href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A> [<A href="mailto:nsrca-discussion-bounces@lists.nsrca.org?">mailto:nsrca-discussion-bounces@lists.nsrca.org</A>]<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Jon Lowe<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, June 16, 2008 12:11 PM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> <A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A><br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Snap entry in FAI</SPAN></FONT></div>
<div class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">I suggest people re-read the definition ofsnap-rolls from the FAI sporting code. I did a few minutes ago. Here it is:</SPAN></FONT><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">"5B.7.5. <B><SPAN style="FONT-WEIGHT: bold">SNAP-ROLLS</SPAN></B></SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">A snap-roll (or flick roll/rudder roll) is a rapid autorotative roll where the model aircraft is in a stalled</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">attitude, with a continuous high angle of attack</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Snap-rolls have the same judging criteria as axial rolls as far as start and stop of the rotation, and</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">constant flight path through the manoeuvre is concerned.</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">At the start of a snap-roll, the fuselage attitude must show a definite break and separation from the</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">flight path, before the rotation is started, since the model aircraft is supposed to be in a stalled</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">condition throughout the manoeuvre, If the stall/break does not occur and the model aircraft barrelrolls</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">around, the manoeuvre must be severely downgraded (more than 5 points). Similarly, axial</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">rolls disguised as snap-rolls must be severely downgraded (more than 5 points).</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Snap-rolls can be flown both positive and negative, and the same criteria apply. The attitude</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(positive or negative) is at the competitor’s discretion. If the model aircraft returns to an unstalled</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">condition during the snap-roll, the manoeuvre is severely downgraded using the 1 point/15 degree</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">rule."</SPAN></FONT></div>
<div class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"><br>
Note that "the fuselage attitude must show a definite break and separation from the flight path, before the rotation is started..." That means that simultaneous pitch and rotation is specifically NOT permitted. I would interpret it as meaning that pitch and yaw could theoretically happen simultaneously, as long as no roll is involved. Sorry Matt, the rules as written do NOT allow actuation in all three axes simultaneously. The rule also states that a constant flight path has to be maintained.<br>
<br>
Let's face it, the only way to prevent severe downgrading from EVERY judge, not just some judges, is to have a pitch break first. Takes any question away.</SPAN></FONT></div>
<div>
<div class=MsoNormal><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">Jon Lowe</SPAN></FONT></div>
</div>
<div class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"><br>
<br>
-----Original Message-----<br>
From: <A href="mailto:rcmaster199@aol.com">rcmaster199@aol.com</A><br>
To: <A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A><br>
Sent: Mon, 16 Jun 2008 10:46 am<br>
Subject: Re: [NSRCA-discussion] Snap entry in FAI</SPAN></FONT></div>
<div id=AOLMsgPart_0_f4e18038-9d63-45d9-87c7-a93410402f63>
<div class=MsoNormal style="BACKGROUND: white"><FONT face=Tahoma color=black size=1><SPAN style="FONT-SIZE: 9pt; COLOR: black; FONT-FAMILY: Tahoma">A "Flick" and a "Snap" roll are the same roll in full scale aerobatics parlance and reference material. <br>
<br>
Do these mean the same thing in model aerobatics? In my view, they do <br>
<br>
The latest FAI regs allow actuation of the three main axes simultaneously...that is, the regs don't specifically differentiate "Pitch Break" from other deviations. I don't think they specifically require that the model must rotate about it's flight path either, I don't believe (.....plane must rotate in a conical fashion about the fight axis....). The model would probably present the best if that's done, so pilots may want to consider that when executing the maneuver. <br>
<br>
In my take, a rapid Pitch is desired to preload the wing. Contrary to popular belief, both panels dot not have to stall for a snap to occur. Quite the opposite. Upon rudder deflection, the port panel will practically stall (lift much much less than the other panel) but the starboard panel must be lifting to create the autorotation. If both panels stall, the model will fall out of the sky for a distance and a snap would not occur at the correct moment in time <br>
<br>
MattK <br>
<br>
-----Original Message----- <br>
From: Woodward, Jim (US SSA) <<A href="mailto:jim.woodward@baesystems.com">jim.woodward@baesystems.com</A>> <br>
To: General pattern discussion <<A href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>> <br>
Sent: Mon, 16 Jun 2008 8:47 am <br>
Subject: Re: [NSRCA-discussion] Snap entry in FAI <br>
<br>
Guys, <br>
<br>
I thought the FAI changes explicitly allowed flick rolls? The rule <br>
reads, "... fuselage attitude must show a definite break and separation <br>
from the flight path." <br>
<br>
It does not say, "MUST SHOW PITCH BREAK." Please DO NOT ERROUNIOUSLY <br>
APPLY A PASS/FAIL MAJOR DEDUCTION initial assessment to the snap roll. <br>
Watch the whole maneuver then render your score. <br>
<br>
A break and separation from the flight path simply means that the nose <br>
and tail of the plane must rotate in a conical fashion about the fight <br>
axis. Yaw, roll, and pitch can all break at the same moment if that is <br>
how the pilot does it. <br>
<br>
Hey :) some really handsome smart guy wrote some stuff at this link <br>
below about snap rolls to help clarify how they are done in IMAC. <br>
<br>
<A href="http://www.mini-iac.com/DesktopDefault.aspx?tabid=77" target=_blank>http://www.mini-iac.com/DesktopDefault.aspx?tabid=77</A> <br>
<br>
thanks, <br>
Jim <br>
<br>
<br>
_______________________________________________ <br>
NSRCA-discussion mailing list <br>
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A> <br>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A> </SPAN></FONT></div>
</div>
<div id=u8CA9DE2C4F75A73-63C-1100>
<div class=MsoNormal style="MARGIN-TOP: 7.5pt; TEXT-ALIGN: center" align=center><FONT face=Arial color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></div>
<div class=MsoNormal style="MARGIN-TOP: 7.5pt"><FONT face=Arial color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"><A title=http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011 href="http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011" target=_blank>Get the Moviefone Toolbar</A>. Showtimes, theaters, movie news, & more!</SPAN></FONT> </div>
</div>
</BLOCKQUOTE></div>
<div id=AOLMsgPart_4_02b65284-83ea-4950-beb7-d8726e751af5><PRE style="BACKGROUND: white"><TT><FONT face="Courier New" color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black">_______________________________________________</SPAN></FONT></TT></PRE><PRE style="BACKGROUND: white"><TT><FONT face="Courier New" color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black">NSRCA-discussion mailing list</SPAN></FONT></TT></PRE><PRE style="BACKGROUND: white"><TT><FONT face="Courier New" color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black"><A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A></SPAN></FONT></TT></PRE><PRE style="BACKGROUND: white"><TT><FONT face="Courier New" color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black"><A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></TT></PRE></div>
<FONT face=Arial color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"></SPAN></FONT>
<div id=u8CA9DEC8A4577FC-63C-16AC>
<div class=MsoNormal style="MARGIN-TOP: 7.5pt; TEXT-ALIGN: center" align=center><FONT face=Arial color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></div>
<div class=MsoNormal style="MARGIN-TOP: 7.5pt"><FONT face=Arial color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"><A title=http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011 href="http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011" target=_blank>Get the Moviefone Toolbar</A>. Showtimes, theaters, movie news, & more!</SPAN></FONT> </div>
</div>
</div>
</div>
<!-- end of AOLMsgPart_3_10dac3e0-4768-4b7d-9454-3fc24f6ce152 -->
<div id=AOLMsgPart_4_10dac3e0-4768-4b7d-9454-3fc24f6ce152 style="FONT-SIZE: 12px; MARGIN: 0px; COLOR: #000; FONT-FAMILY: Tahoma, Verdana, Arial, Sans-Serif; BACKGROUND-COLOR: #fff"><PRE style="FONT-SIZE: 9pt"><TT>_______________________________________________
NSRCA-discussion mailing list
<A href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A>
<A href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A>
</TT></PRE></div>
<!-- end of AOLMsgPart_4_10dac3e0-4768-4b7d-9454-3fc24f6ce152 --><div id='u8CA9DF37345D329-63C-1B63' class='aol_ad_footer'><FONT style="color: black; font: normal 10pt ARIAL, SAN-SERIF;"><HR style="MARGIN-TOP: 10px"><A title="http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011" href="http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011" target="_blank">Get the Moviefone Toolbar</A>. Showtimes, theaters, movie news, & more!</FONT> </div>