<div>I just bought a used CA Models "Eclipse" with a YS 140, Hitori pipe etc. </div>
<div>I have a question about the wing attachment.</div>
<div>Each wing half slides onto the aluminum center tube and there is an incident adjustment peg on the fuse that the trailing edge of each wing fits over. </div>
<div>The aluminum center tube is tapped for a 4-40 bolt about 8 inches out from the fuse on both sides. Once the wing halfs are slid onto the tube, theses 4-40 bolts are inserted through the top of the wing.</div>
<div> </div>
<div>That's it! Kind of a cheesey arrangement.</div>
<div> </div>
<div>There is a hole in the fuse at the leading edge of the wing and a corresponcding (plywood reinforced) hole in each wing half. However, there isn't any hardware associated with these attachment points. I think something is ovbviously missing and would appreciate it if anyone with "Eclipse" experience could help me out.</div>
<div> </div>
<div>Thanks,</div>
<div>Bob Wilson</div>
<div> </div>