With the power poles is it necessary to buy that crimp tool for them? The connectors are reasonable but the crimp tool seams pricey for a few times of use.<BR><BR><B><I>Stuart Chale <schale@optonline.net></I></B> wrote: <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">I'll agree on the RIGrunner. I have the small one and converted all of <BR>my plugs to powerpoles. I have it so that I can easily either use my <BR>Iota power supply to run two TP chargers or flip it over to be run from <BR>a 12 volt battery at the field. Much better that alligator clips <BR>attached to metal bars coming out from the Iota. I did that initially <BR>as well.<BR><BR>Stuart<BR><BR>glmiller3@suddenlink.net wrote:<BR>> Incheol,<BR>><BR>> I got some 8 gauge copper grounding bar at Lowes - you only need a couple of inches- Cut two pieces two inches long and solder a pigtail two or three wires containing the connector of your choice to
each one ( one for positive and the other for negative) to give yourself parallell connections to the source. The 6 or 8 gauge ground stcok will screw into the iota connector port and viola- you have a "permanently attached) set of ground 12 volt source connectors. <BR>><BR>> Another alternative is to connect the Iota to a small fused buss- like this:<BR>><BR>> http://www.powerwerx.com/product.asp?ProdID=1843&CtgID=3574<BR>><BR>> I actually use this and the powerpole conectors to connect my chargers to the Iota. <BR>><BR>> George<BR>> ---- Ihncheol Park <PNAHOBBIES@SBCGLOBAL.NET>wrote: <BR>><BR>> =============<BR>> Ok, I have a question to those using the Iota 55amp power supply.<BR>> <BR>> I hate using a flat screw driver to hold the charger connections to the<BR>> power supply.<BR>> I occasionally have to use more than one charger, so I need a better way to<BR>> use the output connections on the power supply.<BR>>
How do you guys do?<BR>> <BR>> so far, I had no luck on finding a right size solid bars/plates for the<BR>> output for the alligator clips or clamps for chargers.<BR>> Any suggestions?<BR>> <BR>> Ihncheol Park<BR>><BR>> _______________________________________________<BR>> NSRCA-discussion mailing list<BR>> NSRCA-discussion@lists.nsrca.org<BR>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR>><BR>><BR>> <BR><BR><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR></BLOCKQUOTE><BR><p> 
<hr size=1>Never miss a thing. <a href="http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs"> Make Yahoo your homepage.</a>