<div>I used the brass tube on a 35%, just made a simple fixture to guide the tubing. Made a 2x4 into a V-block and rested everything on a flat table, takes some of the luck out of it. Hit the outboard servo pocket using this.</div> <div> </div> <div>Saw a guy just bend some copper wire into a ring with two long ends that he stuck into a trigger operated soldering iron and just melted his way through. Not as pretty as the brass, and still there was that luck thing involved. </div> <div> </div> <div>I was thinking you might try the Clint Eastwood method, 44 Magnum pointed at the servo opening and say "Do You Feel Lucky?" ....probably not accurate at all but it might be fun.</div> <div> </div> <div>brian</div><BR><BR><B><I>Verne Koester <verne@twmi.rr.com></I></B> wrote: <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">I can't see anymore....<BR><BR><BR>----- Original Message -----
<BR>From: "Ken Thompson" <KTHOMPSON@STX.RR.COM><BR>To: "NSRCA Mailing List" <NSRCA-DISCUSSION@LISTS.NSRCA.ORG><BR>Sent: Sunday, January 06, 2008 9:45 PM<BR>Subject: Re: [NSRCA-discussion] Aileron lead holes<BR><BR><BR>It's not been luck Verne, it's nothing more than your phenomenal skill!!<BR>----- Original Message ----- <BR>From: "Verne Koester" <VERNE@TWMI.RR.COM><BR>To: <ATWOODM@PARAGON-INC.COM>; "NSRCA Mailing List"<BR><NSRCA-DISCUSSION@LISTS.NSRCA.ORG><BR>Sent: Sunday, January 06, 2008 8:25 PM<BR>Subject: Re: [NSRCA-discussion] Aileron lead holes<BR><BR><BR>Looking for something easier and more accurate. The tubing has worked okay<BR>in the past but I always felt kinda lucky about it.<BR><BR>Verne<BR><BR><BR>----- Original Message ----- <BR>From: <ATWOODM@PARAGON-INC.COM><BR>To: "NSRCA Mailing List" <NSRCA-DISCUSSION@LISTS.NSRCA.ORG><BR>Sent: Sunday, January 06, 2008 8:38 PM<BR>Subject: Re: [NSRCA-discussion] Aileron lead holes<BR><BR><BR>Verne,<BR><BR>Why the need to
change? Been doing them with a brass tube for 15-20 years<BR>without a hitch.<BR><BR>-Mark.<BR>Sent from my BlackBerry® wireless handheld<BR><BR>-----Original Message-----<BR>From: "Todd Schmidt" <TSCHMIDT@CLASSICNET.NET><BR><BR>Date: Sun, 6 Jan 2008 20:10:56<BR>To:"NSRCA Mailing List" <NSRCA-DISCUSSION@LISTS.NSRCA.ORG><BR>Subject: Re: [NSRCA-discussion] Aileron lead holes<BR><BR><BR>Vern, I cut a 1/2" w by 3/8"d trough in the top of the wing but stop about<BR>2" from the wing root. I then angle a hole from the middle of the airfoil to<BR>the trough.<BR><BR>Todd Schmidt<BR>----- Original Message ----- <BR>From: Verne Koester <mailto:verne@twmi.rr.com><BR>To: NSRCA <mailto:nsrca-discussion@lists.nsrca.org><BR>Sent: Sunday, January 06, 2008 6:07 PM<BR>Subject: [NSRCA-discussion] Aileron lead holes<BR><BR><BR>I'm looking for alternate ways to bore the aileron lead hole in a foam wing<BR>core. In the past, I've done it with 1/2" sharpened brass tubing. Anybody<BR>got a better
way?<BR><BR>Thanks,<BR>Verne<BR><BR>----------------<BR><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org <mailto:NSRCA-discussion@lists.nsrca.org><BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR><HTTP: nsrca-discussion listinfo mailman lists.nsrca.org><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR><BR><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR><BR>_______________________________________________<BR>NSRCA-discussion mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR><BR><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<BR></BLOCKQUOTE><BR></mailto:NSRCA-discussion@lists.nsrca.org></mailto:nsrca-discussion@lists.nsrca.org></mailto:verne@twmi.rr.com><p> 
<hr size=1>Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. <a href="http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ "> Try it now.</a>