<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16587" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><SPAN class=265242813-07012008><FONT face=Arial color=#0000ff size=2>A
piece of 5/32 music wire heated cherry red on the end will do the job
also.</FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B>
nsrca-discussion-bounces@lists.nsrca.org
[mailto:nsrca-discussion-bounces@lists.nsrca.org]<B>On Behalf Of </B>Keith
Black<BR><B>Sent:</B> Sunday, January 06, 2008 11:25 PM<BR><B>To:</B> NSRCA
Mailing List<BR><B>Subject:</B> Re: [NSRCA-discussion] Aileron lead
holes<BR><BR></FONT></DIV>
<DIV><FONT face=Arial size=2>I'm not sure if you have a jig of some sort
keeping the brass tub straight, if not, then you should do so for the next
suggestion. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Take that same brass tubing and hit it with a
propane torch to heat it up. It will then slide through the foam with great
ease. You'll have to remove it and reheat about three or four times. Actually
I believe I've used a 3/8th inch brass tube when using this method, not 1/2".
I don't know if the extra 1/8th inch will cause it to burn through the top or
bottom of the wing.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Keith Black</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=verne@twmi.rr.com href="mailto:verne@twmi.rr.com">Verne Koester</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, January 06, 2008 6:07
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Aileron
lead holes</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial>I'm looking for alternate ways to bore the aileron
lead hole in a foam wing core. In the past, I've done it with 1/2" sharpened
brass tubing. Anybody got a better way?</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Thanks,</FONT></DIV>
<DIV><FONT face=Arial>Verne</FONT></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>