<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=UTF-8">
<META content="MSHTML 6.00.6000.16587" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>I used contact cement for many years but switched to epoxy after my first
try with it. I experienced the issue with the contact cement turning loose
when it gets hot in the sun but the bigger issue for me was being able to keep
the wing or stab straight as I was laying on the skins. Seemed I always
got a bow or twist using the contact cement approach while the epoxy approach
gave me some time to get the cores and skins straight before it cured.</DIV>
<DIV> </DIV>
<DIV>Don</DIV>
<DIV> </DIV>
<DIV>In a message dated 12/28/2007 7:26:36 A.M. Pacific Standard Time,
ejhaury@comcast.net writes:</DIV>
<DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><FONT
style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size=2>
<DIV><FONT face=Arial>I conducted some tests a few years ago with
different adhesives. Essentially equal size foam blocks to which 1/4" x 1" x
4" balsa pieces were glued to each side with Sorghum, 3M77, epoxy, and
Probond. After a 24hr. cure, adhesion (in tension) was measured. Both
contact cements failed at the glue joint without pulling any foam beads. The
foam failed in both cases with the epoxy & polyU. My conclusion was
that the latter provided a good deal better adhesion. OTOH, I've successfully
built a lot of wings with the contact cements that provided good service.
</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Earl</FONT></DIV>
<DIV> </DIV>
<DIV>----- Original Message ----- </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mailto:kgamueller@rogers.com
href="mailto:kgamueller@rogers.com">Karl G. Mueller</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=mailto:nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, December 28, 2007 8:51
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Wing
Cores</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2>I had used the contact cement method back in the 70's with
the 3M-77glue.</FONT></DIV>
<DIV><FONT size=2>It worked great. But after a few years sitting out in the
sun the contact cement</FONT></DIV>
<DIV><FONT size=2>would dry out and the sheeting would delaminate. This was
on a painted wing.</FONT></DIV>
<DIV><FONT size=2>The sheeting would come up in bubbles and the only way to
fix this was to iron</FONT></DIV>
<DIV><FONT size=2>it down with an iron set to just below the melting point
of the paint. This would</FONT></DIV>
<DIV><FONT size=2>reactivate the glue again and the sheeting would stick
down to the foam core.</FONT></DIV>
<DIV><FONT size=2>After that I changed to epoxy and never had any problems
like tha</FONT><FONT size=2>t again.</FONT></DIV>
<DIV><FONT size=2>If you only have your plane for about 2-3 years it is not
a problem, but I usually</FONT></DIV>
<DIV><FONT size=2>keep my planes for 6-8 years and that's when it will show
the problem of </FONT></DIV>
<DIV><FONT size=2>delaminating.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Karl G. Mueller<BR><A title=mailto:kgamueller@rogers.com
href="mailto:kgamueller@rogers.com">kgamueller@rogers.com</A><BR></FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mailto:lightfoot@sc.rr.com href="mailto:lightfoot@sc.rr.com">Jay
Marshall</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=mailto:nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">'NSRCA Mailing List'</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, December 28, 2007 7:54
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Wing
Cores</DIV>
<DIV><BR></DIV>
<DIV class=Section1>
<P class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">I tried the contact method with the JWR Blue
adhesive last night; I coated both balsa and foam surfaces, waited 15
minutes, and pressed them together. Worked fine. Now I have to make a
choice between this or epoxy for sheeting.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<DIV>
<P><B><I><FONT face="Brush Script MT" color=navy size=4><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 13.5pt; COLOR: navy; FONT-STYLE: italic; FONT-FAMILY: 'Brush Script MT'">Jay
</SPAN></FONT></I></B><B><I><FONT face="Brush Script MT" color=navy
size=4><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 13.5pt; COLOR: navy; FONT-STYLE: italic; FONT-FAMILY: 'Brush Script MT'">Marshall</SPAN></FONT></I></B><FONT
color=navy><SPAN style="COLOR: navy"> </SPAN></FONT></P></DIV>
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Tahoma
size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original
Message-----<BR><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B>
</SPAN></FONT><FONT face=Tahoma size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma"><A
title=mailto:nsrca-discussion-bounces@lists.nsrca.org
href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A></SPAN></FONT><FONT
face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">
[mailto:</SPAN></FONT><FONT face=Tahoma size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">nsrca-discussion-bounces@lists.nsrca.org</SPAN></FONT><FONT
face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>J N
Hiller<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Friday,
December 28, 2007 5:36 AM<BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> </SPAN></FONT><FONT face=Tahoma
size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">NSRCA Mailing
List</SPAN></FONT><FONT face=Tahoma size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma"><BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Wing
Cores</SPAN></FONT></P>
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman"
size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P>
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><SPAN
class=EmailStyle22><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt">I used 3M-77 for years because it was quick &
easy. Contact cement is very unforgiving and twisted / warped wing panels
needed to be dealt with occasionally. I am somewhat more patient now and
use finishing resin epoxy.</SPAN></FONT></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><SPAN
class=EmailStyle22><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt">Jim Hiller </SPAN></FONT></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><SPAN
class=EmailStyle22><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt"></SPAN></FONT></SPAN> </P>
<P class=MsoNormal style="MARGIN-LEFT: 1in"><FONT face=Tahoma color=black
size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Tahoma">-----Original
Message-----<BR><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B>
nsrca-discussion-bounces@lists.nsrca.org
[mailto:nsrca-discussion-bounces@lists.nsrca.org]<B><SPAN
style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Nat Penton<BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thursday, December 27, 2007
12:37 PM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> NSRCA
Mailing List<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[NSRCA-discussion] Wing Cores</SPAN></FONT></P>
<P class=MsoNormal style="MARGIN-LEFT: 1in"><FONT face="Times New Roman"
size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P>
<P class=MsoNormal style="MARGIN-LEFT: 1in"><FONT face=Arial color=black
size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Jay</SPAN></FONT></P>
<P class=MsoNormal style="MARGIN-LEFT: 1in"><FONT face=Arial color=black
size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">I
will be interested to see how you come out if you have the foam supplier
cut your cores. High taper ratios ( two or more ) call for smaller cutting
wire. Who and where is the supplier located - I need some foam
?</SPAN></FONT></P>
<P class=MsoNormal style="MARGIN-LEFT: 1in"><FONT face="Times New Roman"
color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P>
<P class=MsoNormal style="MARGIN-LEFT: 1in"><FONT face=Arial color=black
size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Is
the the JWR Blue adhesive similar to 3M 77 contact adhesive
? If so you want need the vac bag. Most builders use epoxy or
polyurethane glue for wing
skinning.
Nat</SPAN></FONT></P>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 76.2pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">----- Original
Message ----- </SPAN></FONT></P></DIV>
<DIV style="font-color: black">
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial
color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> <A
title=mailto:lightfoot@sc.rr.com href="mailto:lightfoot@sc.rr.com">Jay
Marshall</A> </SPAN></FONT></P></DIV>
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 76.2pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> <A
title=mailto:nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">'NSRCA Mailing List'</A>
</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> Wednesday,
December 26, 2007 11:11 AM</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> Re:
[NSRCA-discussion] Wing Cores</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks Jimmy. I
found a local source that provides foam board, blocks & shapes for
many applications, including packaging and constructions forms. They cut
four blocks of 1# to 4X36X18 and then gave me a can of glue to try – all
at no cost. Great people to work with! They can even cut the wings if I
provide the masonite templates! </SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P>
<P
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><I><FONT
face="Brush Script MT" color=navy size=4><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 13.5pt; COLOR: navy; FONT-STYLE: italic; FONT-FAMILY: 'Brush Script MT'">Jay
Marshall</SPAN></FONT></I></B><FONT color=navy><SPAN style="COLOR: navy">
</SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 112.2pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Tahoma color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Tahoma">-----Original
Message-----<BR><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B>
nsrca-discussion-bounces@lists.nsrca.org
[mailto:nsrca-discussion-bounces@lists.nsrca.org] <B><SPAN
style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>jimmy graver<BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, December 26, 2007
12:03 PM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> NSRCA
Mailing List<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[NSRCA-discussion] Wing Cores</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Jay, I am
looking to cut foam wings also this a source I found for foam. <A
title=http://www.aircraftspruce.com/catalog/cmpages/styrofoam.php
href="http://www.aircraftspruce.com/catalog/cmpages/styrofoam.php">http://www.aircraftspruce.com/catalog/cmpages/styrofoam.php</A></SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">I buy
my spruce from them and there service is good. Hope this
helps.</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Jimmy
Graver</SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 115.95pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">----- Original
Message ----- </SPAN></FONT></P></DIV>
<DIV style="font-color: black">
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial
color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> <A
title=mailto:JAStebbins@worldnet.att.net
href="mailto:JAStebbins@worldnet.att.net">Jerry Stebbins</A>
</SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 115.95pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> <A
title=mailto:nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A>
</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> Tuesday,
December 25, 2007 5:23 PM</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> Re:
[NSRCA-discussion] Wing Cores</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Jay, depends on
where you are. There are places in/around Atlanta--check with Mike
Hester-he buys all the time.ACH foam Technologies. I just bought 7
sheets in Nashville. Mix of 0.5 and 0.9 oz foam (virgin). Company was EFT
Corporation. Might try them.1 615-832-6222.</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Jerry</SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 119.7pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">----- Original
Message ----- </SPAN></FONT></P></DIV>
<DIV style="font-color: black">
<P class=MsoNormal style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial
color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> <A
title=mailto:lightfoot@sc.rr.com href="mailto:lightfoot@sc.rr.com">Jay
Marshall</A> </SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 119.7pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> <A
title=mailto:nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A>
</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial"> Tuesday,
December 25, 2007 3:48 PM</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><FONT
face=Arial color=black size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">
[NSRCA-discussion] Wing Cores</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face=Arial color=black size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">What is a good
material and source for wing cores? I have someone to help cut
them.</SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P>
<P
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><B><I><FONT
face="Brush Script MT" color=black size=4><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 13.5pt; COLOR: black; FONT-STYLE: italic; FONT-FAMILY: 'Brush Script MT'">Jay
Marshall</SPAN></FONT></I></B><FONT color=black><SPAN
style="COLOR: black"> </SPAN></FONT></P>
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black"></SPAN></FONT> </P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 83.7pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV class=MsoNormal style="MARGIN-LEFT: 0.5in; TEXT-ALIGN: center"
align=center><FONT face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 119.7pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black">_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A title=mailto:NSRCA-discussion@lists.nsrca.org
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
title=http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 79.95pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV class=MsoNormal style="MARGIN-LEFT: 0.5in; TEXT-ALIGN: center"
align=center><FONT face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 115.95pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black">_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</SPAN></FONT></P></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; MARGIN-TOP: 5pt; PADDING-LEFT: 4pt; MARGIN-BOTTOM: 5pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 40.2pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV class=MsoNormal style="MARGIN-LEFT: 0.5in; TEXT-ALIGN: center"
align=center><FONT face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV></DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 76.2pt; BORDER-LEFT: black 1.5pt solid; MARGIN-RIGHT: 0in; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P class=MsoNormal
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"><FONT
face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black">_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</SPAN></FONT></P></DIV></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE><BR><BR>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</FONT></BLOCKQUOTE></DIV></FONT><BR><BR><BR><DIV><FONT style="color: black; font: normal 10pt ARIAL, SAN-SERIF;"><HR style="MARGIN-TOP: 10px">See AOL's <A title="http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004" href="http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004" target="_blank">top rated recipes</A> and <A title="http://body.aol.com/fitness/winter-exercise?NCID=aoltop00030000000003" href="http://body.aol.com/fitness/winter-exercise?NCID=aoltop00030000000003" target="_blank">easy ways to stay in shape</A> for winter.</FONT></DIV></BODY></HTML>