<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16544" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face="MS Serif" size=2>Having worked with this type of material back
in the 70's I always found it very hard to use. I designed molds for the neck
on Acoustic Guitars the fret board was Alum. and the back was
foam. The foam was very strong and hard but that is because we used heat and
inclosed mold. The foam was put in the mold under pressure.</FONT></DIV>
<DIV><FONT face="MS Serif" size=2>In the 80's I used it to repair a couple of
wing panel's using a plaster of Paris shell and weight. I would not
recommend it because of the
weight. </FONT></DIV></BODY></HTML>