<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:o = "urn:schemas-microsoft-com:office:office" xmlns:st1 =
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1528" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>IP</FONT></DIV>
<DIV><FONT face=Arial size=2>Drill the correct size hole in a scrap block of
wood. Then stick the connector down into the block leaving the end where the
wire goes sticking straight up. Now pretin the wire and connector as usual.
While holding the soldering gun to the connector to keep it hot touch the wire
to the tip of the gun to reheat it and then slide it down into the connector and
remove the soldering gun. Watch for the solder to go hazy indicating it cooled
and pull your new connection out. Slide the shrink wrap down over the
connection and shrink it with the heatgun. OH I forgot -
put the shrink wrap on the wire FIRST <G> and push it all
the way to the other end so it stays cool and doesn't shrink.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I hope that made sense. It is easier to do than to
describe. My writing skills are sometimes not the greatest -but I count pills
for a living :-)</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=pnahobbies@sbcglobal.net
href="mailto:pnahobbies@sbcglobal.net">Ihncheol Park</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, October 17, 2007 5:56
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Connector
weights was RE: Connectors -Electric</DIV>
<DIV><BR></DIV>
<DIV>Eddie,</DIV>
<DIV> </DIV>
<DIV>How do you hold the female connector when soldering the wire? It
looks to be a little thin wall. </DIV>
<DIV>I just got 60 pairs of the 6mm from DraganFly. I will probably use
them on my next project. Amazingly light compared to 5.5mm that I used
on the other setup.</DIV>
<DIV> </DIV>
<DIV>Ihncheol<BR><BR><B><I>Eddie Batchelor <<A
href="mailto:perkinsrx@centurytel.net">perkinsrx@centurytel.net</A>></I></B>
wrote:</DIV>
<BLOCKQUOTE class=replbq
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<META content="Microsoft Word 11 (filtered medium)" name=Generator>
<STYLE>v\:* {
BEHAVIOR: url(#default#VML)
}
o\:* {
BEHAVIOR: url(#default#VML)
}
w\:* {
BEHAVIOR: url(#default#VML)
}
.shape {
BEHAVIOR: url(#default#VML)
}
</STYLE>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="country-region"></o:SmartTagType><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="place"></o:SmartTagType><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="PersonName"></o:SmartTagType>
<STYLE> st1\:*{behavior:url(#default#ieooui) } </STYLE>
<STYLE> <!-- v\:* { BEHAVIOR: url(#default#VML) } o\:* { BEHAVIOR: url(#default#VML) } w\:* { BEHAVIOR: url(#default#VML) } .SHAPE {BEHAVIOR: url(#default#VML) ;} st1\:*{behavior:url(#default#ieooui) } /* Font Definitions */ @font-face {font-family:Wingdings; panose-1:5 0 0 0 0 0 0 0 0 0;} @font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";} a:link, span.MsoHyperlink {color:blue; text-decoration:underline;} a:visited,
span.MsoHyperlinkFollowed {color:blue; text-decoration:underline;} p {mso-margin-top-alt:auto; margin-right:0in; mso-margin-bottom-alt:auto; margin-left:0in; font-size:12.0pt; font-family:"Times New Roman";} span.EmailStyle18 {mso-style-type:personal; font-family:Arial; color:navy;} span.EmailStyle19 {mso-style-type:personal-reply; font-family:Arial; color:navy;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in;} div.Section1 {page:Section1;} --> </STYLE>
<DIV class=Section1>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">OK the weights of
the different connectors kept weighing on my mind
<G> SOO I did some
weighing.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Unfortunately I
only had a few pairs of each size NIB and we all know there will be
variations in units depending on QC. But hereĄŻs what I
got.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">I weighed 2 pairs
of each but then realized Deans 1pair(1 male&1 female) handles 4 wires,
2 on each side.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The bullet
connectors take a plug for each wire so I weighed 2 pairs
(2male&2female) each, because thatĄŻs what will handle 4 wires, 2 on
each side.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> <o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Deans
2pair
9.302Gm/2pair or 4.651Gm/2 for an average of
2.326/plug<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Schultze 4mm
bullets 6.746Gm/2 for an average of
3.373/plug<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Neu
5.5mm bullets 11.326Gm/2 for an average of
5.663/plug<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Neu
6mm bullets 6.647Gm/2 for an average of
3.324/plug<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Of the choices of
bullets I had available the 6mm Neu are the lightest and handle the largest
wire. Current & amperage is pretty close if not the same on the 4mm,
5.5mm, and 6mm choices .<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Now putting a
3.5mm(11Ga) wire into a 3.5mm connector sounds almost like magic to me
</SPAN></FONT><FONT face=Wingdings color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Wingdings">J</SPAN></FONT><FONT
face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">. I would love to
see weights on the MPJet choices but I didnĄŻt find any listed on the site.
If anyone has them send me 2 pair & IĄŻll weigh them and send them
back.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">At first glance,
and I made the same mistake earlier, Deans appeared to be heavier than the
Schultze 4mm & the Neu 6mm. But I was weighing 2 pairs of
everything.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">In my setup I have
6 Neu 6mm bullets (3 pair) for a weight of 19.941Gm + 1 deans pair ,arming
switch, that I plug 1 male deans into to fly so add another 4.651Gm for a
grand total of plug weights 24.595Gm<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">In the Dean setups
IĄŻve seen usually there are 5 Deans plugs counting 1 for an arming switch
for a total weight of 11.628Gm<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Although Bullets
are heavier and you need to keep the males insulated, they are SO much
easier to make up that IĄŻm happy with them.<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><st1:PersonName w:st="on"><FONT face=Arial color=navy
size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Eddie</SPAN></FONT></st1:PersonName><FONT
face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR tabIndex=-1 align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Tahoma size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">From:</SPAN></FONT></B><FONT
face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">
nsrca-discussion-bounces@lists.nsrca.org
[mailto:nsrca-discussion-bounces@lists.nsrca.org] <B><SPAN
style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Earl Haury<BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, October 15, 2007 1:36
PM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> <st1:PersonName
w:st="on">NSRCA Mailing List</st1:PersonName><BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion]
Connectors - Electric</SPAN></FONT><o:p></o:p></DIV></DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=3><SPAN
style="FONT-SIZE: 12pt; FONT-FAMILY: Arial">Right - no problem removing the
plating where the wire will be soldered (Use a good solder with a little
silver in it - I like Deans racing solder). The gold plating prevents
oxidation (which is resistive) on the connecting surfaces.
</SPAN></FONT><o:p></o:p></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=3><SPAN
style="FONT-SIZE: 12pt; FONT-FAMILY: Arial">Earl</SPAN></FONT><o:p></o:p></DIV></DIV>
<BLOCKQUOTE
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">----- Original Message -----
<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV style="font-color: black">
<DIV class=MsoNormal style="BACKGROUND: #e4e4e4"><B><FONT face=Arial
size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A
title=brian_w_young@yahoo.com href="mailto:brian_w_young@yahoo.com">brian
young</A> <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A>
<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">
Monday, October 15, 2007 1:13 PM<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Re:
[NSRCA-discussion] Connectors -
Electric<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">These 3.5mm plugs are gold plated, my wire
wont fit the socket. But I hate to drill them open since they are plated,
but the base is copper I assume so does it make any difference as
they are getting soldered anyway?<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">Brian<BR><BR><B><I><SPAN
style="FONT-WEIGHT: bold; FONT-STYLE: italic">Earl Haury <<A
href="mailto:ejhaury@comcast.net">ejhaury@comcast.net</A>></SPAN></I></B>
wrote:<o:p></o:p></SPAN></FONT></DIV></DIV>
<BLOCKQUOTE
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; MARGIN-TOP: 5pt; PADDING-LEFT: 4pt; MARGIN-BOTTOM: 5pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 3.75pt; BORDER-LEFT: #1010ff 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=3><SPAN
style="FONT-SIZE: 12pt; FONT-FAMILY: Arial">Jason</SPAN></FONT><o:p></o:p></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=3><SPAN
style="FONT-SIZE: 12pt; FONT-FAMILY: Arial">The Hacker Comp plugs
(female for ESC to match those provided on motor) are 3.5mm. Jeti 3.5mm
from Esprit work. If you don't mind changing the motor side, others will
work too. Drilling the wire side deeper and cutting off the excess can
save weight.</SPAN></FONT><o:p></o:p></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=3><SPAN
style="FONT-SIZE: 12pt; FONT-FAMILY: Arial">Earl</SPAN></FONT><o:p></o:p></DIV></DIV>
<BLOCKQUOTE
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">----- Original Message
----- <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV style="font-color: black">
<DIV class=MsoNormal style="BACKGROUND: #e4e4e4"><B><FONT face=Arial
size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">
<A title=jshulman@cfl.rr.com
href="mailto:jshulman@cfl.rr.com">JShulman</A>
<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">
<A title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A>
<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">
Monday, October 15, 2007 12:02 PM<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">
Re: [NSRCA-discussion] Connectors -
Electric<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=blue size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: blue; FONT-FAMILY: Arial">Anyone know
what connectors are used on the Hacker C-50 set-ups? They look like
the 4mm plugs on the Neu site, just wondering if anyone knew for
sure.</SPAN></FONT><o:p></o:p></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=2><SPAN
style="FONT-SIZE: 10pt">Regards,<BR>Jason<BR><A
href="http://www.jasonshulman.com/">www.jasonshulman.com</A><BR><A
href="http://www.shulmanaviation.com/">www.shulmanaviation.com</A><BR><A
href="http://www.composite-arf.com/">www.composite-arf.com</A></SPAN></FONT>
<o:p></o:p></DIV></DIV>
<BLOCKQUOTE
style="MARGIN-TOP: 5pt; MARGIN-BOTTOM: 5pt; MARGIN-RIGHT: 0in">
<DIV class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face=Tahoma
size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original
Message-----<BR><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B>
<A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A>
[mailto:nsrca-discussion-bounces@lists.nsrca.org]<B><SPAN
style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Dave<BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, October 15, 2007
11:53 AM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B>
'<st1:PersonName w:st="on">NSRCA Mailing
List</st1:PersonName>'<BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion]
Connectors - Electric</SPAN></FONT><o:p></o:p></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><A
href="http://www.neumotors.com/20061222/Connectors.html">http://www.neumotors.com/20061222/Connectors.html</A><o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">These might
work for you as well.<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Dave<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR tabIndex=-1 align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Tahoma size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">From:</SPAN></FONT></B><FONT
face=Tahoma size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">
nsrca-discussion-bounces@lists.nsrca.org
[mailto:nsrca-discussion-bounces@lists.nsrca.org] <B><SPAN
style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B><st1:PersonName
w:st="on">Keith Black</st1:PersonName><BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, October 15, 2007
10:42 AM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B>
<st1:PersonName w:st="on">NSRCA Mailing
List</st1:PersonName><BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion]
Connectors - Electric</SPAN></FONT><o:p></o:p></DIV></DIV></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Brian, those are really
sweet connectors. Let me know if you find a
supply.</SPAN></FONT><o:p></o:p></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Keith</SPAN></FONT><o:p></o:p></DIV></DIV></DIV>
<BLOCKQUOTE
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">----- Original Message
----- <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV style="font-color: black">
<DIV>
<DIV class=MsoNormal style="BACKGROUND: #e4e4e4"><B><FONT
face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A
title=brian_w_young@yahoo.com
href="mailto:brian_w_young@yahoo.com">brian young</A>
<o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing
List</A> <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Monday, October 15,
2007 8:18 AM<o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT
face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> [NSRCA-discussion]
Connectors - Electric<o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">Im trying to find MP Jet
3.5mm that accept 3.5mm wire (11ga) to fit my batteries.
Anyone have any source on these in the <st1:place
w:st="on"><st1:country-region w:st="on"
u1_x003a_st="on">US</st1:country-region></st1:place>?<o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><A
href="http://www.mpjet.com/news/index.php?option=com_wrapper&Itemid=28">http://www.mpjet.com/news/index.php?option=com_wrapper&Itemid=28</A><o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">Deans are an option I guess but would
prefer the bullets. <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">(As a side note I have some 3.5mm MP Jets
that accept 2.5 mm (14Ga) wire if anyone wants
some.)<o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"> <o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">Brian<o:p></o:p></SPAN></FONT></DIV></DIV></DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=1>
</SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">Looking for a deal? <A
href="http://us.rd.yahoo.com/evt=47094/*http:/farechase.yahoo.com/;_ylc=X3oDMTFicDJoNDllBF9TAzk3NDA3NTg5BHBvcwMxMwRzZWMDZ3JvdXBzBHNsawNlbWFpbC1uY20-">Find
great prices on flights and hotels</A> with Yahoo! FareChase.
<o:p></o:p></SPAN></FONT></DIV></DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<o:p></o:p></SPAN></FONT></DIV></DIV></BLOCKQUOTE></BLOCKQUOTE>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<o:p></o:p></SPAN></FONT></DIV></DIV></BLOCKQUOTE>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<o:p></o:p></SPAN></FONT></DIV></BLOCKQUOTE>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=1>
</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">Take the Internet to Go: Yahoo!Go puts the <A
href="http://us.rd.yahoo.com/evt=48253/*http:/mobile.yahoo.com/go?refer=1GNXIC">Internet
in your pocket:</A> mail, news, photos & more.
<o:p></o:p></SPAN></FONT></DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<DIV class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<o:p></o:p></SPAN></FONT></DIV></BLOCKQUOTE></DIV>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE><BR>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>