<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3059" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Ed,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>If you saw my trailer I just have the
slider riding on wood side rails and used 1x2 under/or on top of the floor
length wise to stiffen the sheet ply (I used 1/2 ply). I just used
bar soap to lube the friction point and that</FONT><FONT face=Arial size=2>
worked just fine. Using wood that is smooth and free of knots. I can
take the middle tray out if I need to haul anything with a lot of height to it.
</FONT><FONT face=Arial size=2>If your just using it for airplanes should be
just fine.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Wayne G.</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=divesplat@yahoo.com href="mailto:divesplat@yahoo.com">Ed Deaver</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=mini-iac@yahoogroups.com
href="mailto:mini-iac@yahoogroups.com">mini-iac@yahoogroups.com</A> ; <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, April 25, 2007 3:21
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Moving pickup
floor</DIV>
<DIV><BR></DIV>
<DIV>Hey everyone. Am soliciting ideas to make a floor for my 8ft bed
Dodge Ram that will slide easily.</DIV>
<DIV>Have checked out drawer rails but none are long enough and the saleman
states wouldn't handle the weight. There is a kit out there for around
$600 but think it can be made much cheaper. Already have a 3/4" piece of
ply. Just need to figure out a way to be able to slide it in and out of
the bed without getting a hernia, or using such force that the planes dislodge
when putting back in.</DIV>
<DIV>Some thoughts I had are using 2x4's on the side and making a slide
channel using 1x1's and lubricating with some grease, lithium ect. Don't
know how that would work.</DIV>
<DIV>Another thought is to try to find some sort of premade "track" that can
be screwed to the 2x4 and the ply using a series of bearings/wheels to slide
easily.</DIV>
<DIV>The next question is do I put a movable leg on the end so when pulling
out it drops down and supports the floor, or just have a dead line on the
floor and never pull it out past that point?</DIV>
<DIV>Thanx in advance and any help or ideas are greatly appreciated.</DIV>
<DIV>Ed</DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>