<html><body>
<DIV>Vincente,</DIV>
<DIV> </DIV>
<DIV>The 8411, 8411sa, and 8231 use the same gear ratio. If you buy the 8411sa gearset, it includes a metal output gear (more expensive) whereas the 8231 is all nylon (cheaper).</DIV>
<DIV> </DIV>
<DIV>Dave</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: vicenterc@comcast.net <BR>
<DIV>What is the difference between the 8231 (that Dave Lockhart mentioned before) and the 8411SA gears? Probably they are the same. </DIV>
<DIV> </DIV>
<DIV>Thanks,</DIV>
<DIV>--<BR>Vicente "Vince" Bortone</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: jonlowe@aol.com <BR><BR>> DS8417. Real fast. If you don't like metal gears, you can substitute <BR>> the two center plastic gears from the 8411SA. Slows it slightly, but <BR>> still very fast. <BR>> <BR>> Jon <BR>> <BR>> -----Original Message----- <BR>> From: vicenterc@comcast.net <BR>> To: nsrca-discussion@lists.nsrca.org; nsrca-discussion@lists.nsrca.org <BR>> Sent: Wed, 14 Mar 2007 4:16 PM <BR>> Subject: Re: [NSRCA-discussion] (no subject) <BR>> <BR>> What about team JR. I guess that I do not want to start a brand war <BR>> but is going to happen anyway. <BR>>  <BR>> -- <BR>> Vicente "Vince" Bortone <BR>>  <BR>> -------------- Original message -------------- <BR>> From: "Archie Stafford" <RCPATTERN@STX.RR.COM><BR>> Vince, <BR>> <BR>>  <BR>> <BR>> I fle! w the
D EPS system the last couple of years in my Mantis in <BR>> Masters. I flew Futaba’s 9254 heli tail rotor servo on the elevator <BR>> and LOVED it. Not a lot of torque, only 50+oz, but lightning quick. <BR>> CPLR flew this servo at the 2005 worlds and I tried it and if I was <BR>> going to run one servo again, that is the way I would go. Was great <BR>> for snaps because of the speed. The servo literally was fast enough <BR>> that if you threw the sticks to the corners you still saw a break. <BR>>  Prior to that I ran a 9252 servo and I’m sure a lot of guys are <BR>> running that setup with Futaba now. For me though, I would stay with <BR>> the 9254. For pattern we don’t need the torque on the elevator that a <BR>> lot of guys are running, <BR>> <BR>>  <BR>> <BR>> Arch Stafford <BR>> <BR>> Team Futaba <BR>> <BR>>  <BR>> <BR>> -------- <BR>> <BR>> From: nsrca-discussion-bounces@lists.nsrca.org <BR>&
! gt; [ma ilto:nsrca-discussion-bounces@lists.nsrca.org] On Behalf Of <BR>> vicenterc@comcast.net <BR>> Sent: Wednesday, March 14, 2007 4:00 PM <BR>> To: NSRCA <BR>> Subject: [NSRCA-discussion] (no subject) <BR>> <BR>> <BR>>  <BR>> <BR>> Hello all, <BR>> <BR>> <BR>>  <BR>> <BR>> <BR>> I would like to get suggestions in regard elevator servos.  I am <BR>> planing to use one servo with the Central Hobbies DEPS system that has <BR>> been working well for me. I fly Masters. <BR>> <BR>> <BR>>  <BR>> <BR>> <BR>> Thanks, <BR>> <BR>> <BR>>  <BR>> <BR>> <BR>> -- <BR>> Vicente "Vince" Bortone <BR>> <BR>> <BR>> <BR>>  <BR>> <BR>> <BR>> <BR>> <BR>> Attached Message <BR>> From:rcpattern@stx.rr.com <BR>> To:nsrca-discussion@lists.nsrca.org <BR>> Subject:Re: [NSRCA-discussion] (no subject) <BR>> Date:Wed, 14 Mar 2007 4:08 PM <BR>> <BR>> ___________________
___! _______ __________________ <BR>> NSRCA-discussion mailing list <BR>> NSRCA-discussion@lists.nsrca.org <BR>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <BR>> <BR>> <BR>> _______________________________________________ <BR>> NSRCA-discussion mailing list <BR>> NSRCA-discussion@lists.nsrca.org <BR>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <BR>> <BR>> ________________________________________________________________________ <BR>> AOL now offers free email to everyone. Find out more about what's free <BR>> from AOL at AOL.com. <BR>> =0 <BR>> _______________________________________________ <BR>> NSRCA-discussion mailing list <BR>> NSRCA-discussion@lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion </BLOCKQUOTE></BLOCKQUOTE></body></html>