<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.5730.11" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I'm probably the originator of the
.070 carbon-dep system - about 86. Carbon/balsa fuses and kevlar/balsa
fuses , are poor combinations, and I'm still using them. Both systems
are vulnerable to temp and/or humidity changes and are a pain. Since I've been
doing this since 86 I must be a slow learner. No slop but sometimes a trim
change every hour.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>With balsa fuses, for elev, I plan to go (back) to
a balsa dowell pushrod and use a crossover ( MK, or custom ? ) just in
front of the stab. Not sure how to handle the rudder, two small hard balsa
dowells ? I've had undue kevlar tension ruin two DS8411sa servos on an
electric.
Nat</FONT></DIV></BODY></HTML>