<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1528" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Steve,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The link below has some pictures of mine, you saw
at NATS, but no real description on the building process. <A
href="http://www.rcuniverse.com/forum/m_4245872/mpage_1/key_brio%2Cflies/tm.htm">http://www.rcuniverse.com/forum/m_4245872/mpage_1/key_brio%2Cflies/tm.htm</A></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here are a few things to consider to get started.
</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>1. I cut out the firewall and used Jerry Budd's
electric mount. After MANY hours of scratching my head I decided his mount would
make things easier. For the back motor brace I used 1/8" light ply laminated
with carbon cloth. Jerry also sells a rear motor brace which may make
things easier.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>2. I removed the pipe tunnel except where I wanted
to use it for mounting my elevator servo.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>3. My wings and stab weren't installed aligned
correctly. I had to reset my main wing tube and the stab.</FONT></DIV>
<DIV><FONT face=Arial size=2>This link briefly describes wing tube resetting,
stab tube adjustment, control horn geometry and rudder building: <A
href="http://www.rcuniverse.com/forum/m_2728173/mpage_6/key_reset%2Ctube/tm.htm">http://www.rcuniverse.com/forum/m_2728173/mpage_6/key_reset%2Ctube/tm.htm</A></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>4. You'll definitely want to replace your rudder,
doing so can save close to 2 ounces!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>This is a start, let me know if you have
any additional questions.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Keith</FONT> </DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=f3aflyer7@gmail.com href="mailto:f3aflyer7@gmail.com">Scott
Pavlock</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Discussion List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, November 17, 2006 1:27
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Electric Brio
Weight Savings</DIV>
<DIV><BR></DIV>Does anyone have any information or even pictures of how they
started their electric Brio? I have mine on the table but am totally stumped
on what to do first. Also, other than Don Szczur's write up on RCU, are there
any other Brio build sites that happen to have something about building one
electric. <BR><BR><BR>Thanks!<BR><BR>Scott Pavlock<BR>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>