<div>I was just about finished setting up my Odyssey when I noticed that the wing seemed a little loose. If I hold the fuselage the right wing&nbsp;panel&nbsp;can wiggle up and down a noticable amount. I thought that maybe the&nbsp;tube mount at the fuse was loose but that was not the case. As it turns out, the phenolic in my completed wing is loose about 3/4 of the way down and is wiggling around. It almost feels like the foam in the sheeted&nbsp;foam core wing has been somehow&nbsp;dislodged and the phenolic is&nbsp;in just a hollow cavern instead of solidly glued to the wing. It is still&nbsp;glued solid at the root so it won't slide out, but it obviously can not be flown in that condition.</div>  <div>&nbsp;</div>  <div>Question:</div>  <div>How do I go about repairing the foam that the phenolic mounts to? The wing is&nbsp;sheeted, covered, and trimmed (complete) and I would like to keep from having to start all over again. Getting out the old one will also be an issue
 as it is still partially glued in. </div>  <div>&nbsp;</div>  <div>I am open to any and all suggestions.</div>  <div>&nbsp;</div>  <div>Thanks in advance</div>  <div>Anthony&nbsp;&nbsp;&nbsp;</div>