<html><body>
<DIV>Scott,</DIV>
<DIV> </DIV>
<DIV>I had similar problem years ago with different brands of Rx than the Tx.. The final solution was to use the same brand for both. I think you just had the same experience. This was more than 10 years ago. The conditions are different but the results are similar. I think you just found the reason for your problem and you should be fine.</DIV>
<DIV> </DIV>
<DIV>I am not expert in electronic. I am not sure when you say "masking". My way to check is to doing range check. If works there is not problem PCM or PPM. I am not sure how the PCM receiver could be "masking" the problem. The receiver lock out or go to fail safe when does not get the TX signal. If you want to check what happens when the RX locks out just turn of f the transmitter. The receiver will control the servos to the pre-programmed position. You can program that position. Electronic experts, am I right? </DIV>
<DIV> </DIV>
<DIV>Good luck at the Nats. I wish that I could be there.</DIV>
<DIV> </DIV>
<DIV>Vicente Bortone</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: "Scott Pavlock" <f3aflyer7@gmail.com> <BR>Well I think I may have found somthing that works. I put a Futaba PCM receiver in instead of my PPM receiver, and everything seemes to work. No buzzing or glitching. However, could the PCM be still masking my problem, and would there be the potential for lockout? Too much to think about for me thats for sure. I'll have to do some more extensive testing with the PCM reciever to see if it's actually going to help. <BR><BR>For now, the Jeskys have offered to let me borrow a complete JR TX/RX/Servo set up for the NATS. This is going to be my best way to temporarially solve the problem, and then after the NATS, we will definitely figure out the true root of this problem. It's too odd to let go. Thanks a bunch to everyone who offered setups and what not, the Jeskys live close so its much more feasa
ble. <BR><BR>I really appreciate everyone's input and it has all helped a great deal. Right now the closest we've gotten is with the PCM reciever. Hopefully that will solve the problem.<BR><BR>Scott<BR><BR>
<DIV><SPAN class=gmail_quote>On 7/5/06, <B class=gmail_sendername>R. LIPRIE</B> <<A href="mailto:RLIPRIE@centurytel.net">RLIPRIE@centurytel.net</A>> wrote:</SPAN>
<BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV bgcolor="#ffffff">
<DIV><FONT size=2>The best servos you could get, would be DIGITAL.</FONT></DIV>
<DIV><FONT size=2> Matt</FONT></DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: rgb(0,0,0) 2px solid; MARGIN-RIGHT: 0px"></BLOCKQUOTE></DIV>
<DIV><SPAN class=q>
<DIV style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: rgb(228,228,228) 0% 50%; FONT: 10pt arial; font-size-adjust: none; font-stretch: normal; moz-background-clip: -moz-initial; moz-background-origin: -moz-initial; moz-background-inline-policy: -moz-initial"><B>From:</B> <A title=f3aflyer7@gmail.com onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:f3aflyer7@gmail.com" target=_blank>Scott Pavlock</A> </DIV></SPAN></DIV>
<DIV><SPAN class=e id=q_10c400f628558046_2>
<DIV style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>To:</B> <A title=K6XYZ@valornet.com onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:K6XYZ@valornet.com" target=_blank>K6XYZ@valornet.com</A> ; <A title=nsrca-discussion@lists.nsrca.org onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion@lists.nsrca.org" target=_blank>NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Sent:</B> Wednesday, July 05, 2006 11:04 AM</DIV>
<DIV style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Subject:</B> Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!</DIV>
<DIV><BR></DIV>First, I just want to say thanks a whole bunch to the people who offered me equipment as I've gotten some private e-mails also. It really goes to show how great people are in this hobby. I am, however, going to go through local sources for different equipment. There are a lot of people at my club with plenty of different TX's and RX's in all different brands so instead of trying to rush and get things here so quickly, I would rather get them locally first. Thanks a ton!! <BR><BR>Next, I want to reiterate my set up because I think this is getting a little confusing.<BR><BR>My current set up which shows NO visible problems is: <BR>-Futaba 9C with the syntheszed module.<BR>-Hitec Super Slim RX on channel 49. <BR>-2 Futaba 3010's.<BR>-2 Hitec HS77's.<BR>-1 Hitec HS81MG.<BR>-Duralite 2s2p RX Battery<BR>-MPI 5.6v Regulator.<BR>-MPI HD Switch Harness.<BR>-Cermark gold plated extentions.<BR><BR>Now here is my problem set up which shows the glitch: <BR>-2 JR 9411sa's<BR>-1 JR
8417<BR>-1 JR 8411sa<BR>-1 JR 3421sa<BR>-The rest is identical.<BR><BR>As you can see, the only thing that seems to make it work is the alanog servos.<BR><BR>Del, they glitch when they are connected and disconnected from the surfaces. More so when they are connected, but I can totally rule out the airframe being the problem. These servos have at least 2 years of flying on them and one of the hypothesis I had was that after being vibrated around for 2 years, theyre now feeling like they should always be doing that, even without a load. Not sure if that's possible, but I'm just throwin out ideas. <BR><BR>The next thing I am going to test is a Futaba PCM receiver on both set ups. The set up that works will be in the aircraft, and the set up that doesnt will be sitting in the foam transmitter box.<BR><BR>***Important*** <BR>Yesterday I range tested both set ups. The one that "works" is in the plane, and the one that doesnt (JR digitals) was in the transmitter box. Both tests were done
outside on grass. I put the antenna all the way down and walked at least 300 feet with no noticible problem at all when testing the airplane. When testing the digital servos, I was able to walk about 100 feet from the box they were sitting in and thats when they became very noticible glitches. This was both with the antenna at 1 section out, and all the way up. The glitch was reduced when it was all the way out but it was still prevalent. <BR><BR>
<DIV><SPAN class=gmail_quote>On 7/5/06, <B class=gmail_sendername>Dave Harmon</B> <<A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:K6XYZ@valornet.com" target=_blank>K6XYZ@valornet.com</A>> wrote:</SPAN>
<BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV lang=EN-US bgcolor="white" link="blue" vlink="blue">
<DIV>
<P><FONT face="Comic Sans MS" color=blue size=2><SPAN style="FONT-SIZE: 10pt; COLOR: blue">Which model Futaba rx is it?</SPAN></FONT></P>
<P><FONT face="Comic Sans MS" color=blue size=2><SPAN style="FONT-SIZE: 10pt; COLOR: blue"></SPAN></FONT> </P>
<DIV>
<P><FONT face="Times New Roman" color=blue size=2><SPAN style="FONT-SIZE: 10pt; COLOR: blue">Regards<BR><BR>Dave Harmon<BR>NSRCA 586<BR>K6XYZ[at]valornet[dot]com<BR>Broken Arrow, Ok.</SPAN></FONT><FONT color=blue><SPAN style="COLOR: blue"> </SPAN></FONT></P></DIV></DIV>
<DIV><SPAN>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original Message-----<BR><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> <A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion-bounces@lists.nsrca.org" target=_blank>nsrca-discussion-bounces@lists.nsrca.org </A>[mailto:<A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion-bounces@lists.nsrca.org" target=_blank>nsrca-discussion-bounces@lists.nsrca.org</A>] <B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>John Ferrell<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, July 05, 2006 9:21 AM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> NSRCA Mailing List<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!</SPAN></FONT></P>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">I have seen this kind of "Twilight Zone" ( I really like that term!) failure in industrial products. The problem is probably present in the Analog setup but the system is not fast enough for it to show.</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">If the digital servos are trying to latch up on the leading edge of a signal shift they may simply be following switching transients.</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">I seem to recall a condition where Jr had a filter across the signal at the reciever and Futaba had a filter across the signal at the servo. Since it always seemed to work OK so the condition was ignored. May be that the filter has become essential. I suppose that we may have reached the point in time that we can no longer ignore the differences in the two systems. </SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">I have used mixed systems but I have never been comfortable ignoring any engineer's specfications.</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">When you mix the two systems it is a hack and you become the test pilot...</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">BTW, my guess is that the glitch can be fixed with a capacitor (100pf?) across the signal at the servo end. But then it might just make it worse!</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">John Ferrell W8CCW<BR>"My Competition is not my enemy"<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://dixienc.us/" target=_blank>http://DixieNC.US</A></SPAN></FONT></P></DIV>
<BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">----- Original Message ----- </SPAN></FONT></P></DIV>
<DIV>
<P style="BACKGROUND: rgb(228,228,228) 0% 50%; MARGIN-LEFT: 0.5in; moz-background-clip: -moz-initial; moz-background-origin: -moz-initial; moz-background-inline-policy: -moz-initial"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A title=jpavlick@idseng.com onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:jpavlick@idseng.com" target=_blank>John Pavlick</A> </SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A title=nsrca-discussion@lists.nsrca.org onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion@lists.nsrca.org" target=_blank>NSRCA Mailing List</A> </SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Tuesday, July 04, 2006 7:07 PM</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial color=blue size=2><SPAN style="FONT-SIZE: 10pt; COLOR: blue; FONT-FAMILY: Arial">Scott A.: Yeah, a possibility - but he says it works OK with the analog servos. It would be worth checking, but if he has another Rx he could just substitute that (probably already did) and see if the problem goes away. Scott P.: Does moving the antenna change anything? You have to find the common denominator. If it's not the Rx then maybe it has something to do with the installation. There is something going on there and I'm not sure why the digital servos make it more apparent. Find someone who knows how to use a 'scope and see if they can help you. This is weird - you guys have the same first name and my last name looks like yours. Maybe we're all stuck in the Twilight Zone...</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=2><SPAN style="FONT-SIZE: 10pt">John Pavlick<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.idseng.com/" target=_blank>http://www.idseng.com</A><BR> </SPAN></FONT> </P></DIV>
<BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<P style="MARGIN-BOTTOM: 12pt; MARGIN-LEFT: 0.5in; MARGIN-RIGHT: 0in"><FONT face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original Message-----<BR><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> <A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion-bounces@lists.nsrca.org" target=_blank>nsrca-discussion-bounces@lists.nsrca.org </A>[mailto:<A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion-bounces@lists.nsrca.org" target=_blank> nsrca-discussion-bounces@lists.nsrca.org</A>]<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Scott Anderson<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Tuesday, July 04, 2006 6:47 PM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> NSRCA Mailing List<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!</SPAN></FONT></P>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial color=blue size=4><SPAN style="FONT-SIZE: 13.5pt; COLOR: blue; FONT-FAMILY: Arial">Hi Scott,</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial color=blue size=4><SPAN style="FONT-SIZE: 13.5pt; COLOR: blue; FONT-FAMILY: Arial">Stupid question, did you send RX out and have it put on a shaker table and checked.. I had a RX issue for over a month and spent time with Tony S. and he found a bad filter on the board.. </SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial color=blue size=4><SPAN style="FONT-SIZE: 13.5pt; COLOR: blue; FONT-FAMILY: Arial">Just my 2 cents from a fellow team member..</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial color=blue size=4><SPAN style="FONT-SIZE: 13.5pt; COLOR: blue; FONT-FAMILY: Arial">Scott Anderson</SPAN></FONT></P></DIV>
<BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">----- Original Message ----- </SPAN></FONT></P></DIV>
<DIV>
<P style="BACKGROUND: rgb(228,228,228) 0% 50%; MARGIN-LEFT: 0.5in; moz-background-clip: -moz-initial; moz-background-origin: -moz-initial; moz-background-inline-policy: -moz-initial"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">From:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A title=f3aflyer7@gmail.com onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:f3aflyer7@gmail.com" target=_blank>Scott Pavlock</A> </SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">To:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> <A title=nsrca-discussion@lists.nsrca.org onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:nsrca-discussion@lists.nsrca.org" target=_blank>NSRCA Mailing List</A> </SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Sent:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Tuesday, July 04, 2006 6:29 PM</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><B><FONT face=Arial size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Subject:</SPAN></FONT></B><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!</SPAN></FONT></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </P></DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">I've used multiple battery set ups including ones without a regulator on a normal NiCd pack, and also on both a 5.6v regulator and a 6v regulator.<BR><BR>John,<BR><BR>No I don't. I actually have no clue what that is haha.<BR><BR>/nsrca-discussion</SPAN></FONT></P></BLOCKQUOTE></BLOCKQUOTE>
<DIV style="MARGIN-LEFT: 0.5in; TEXT-ALIGN: center" align=center><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<P style="MARGIN-LEFT: 0.5in"><FONT face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">_______________________________________________<BR>NSRCA-discussion mailing list<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:NSRCA-discussion@lists.nsrca.org" target=_blank>NSRCA-discussion@lists.nsrca.org</A><BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></SPAN></FONT></P></BLOCKQUOTE></SPAN></DIV>
<DIV> </DIV></DIV></DIV><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:NSRCA-discussion@lists.nsrca.org" target=_blank>NSRCA-discussion@lists.nsrca.org </A><BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A><BR><BR></BLOCKQUOTE></DIV><BR></SPAN></DIV>
<DIV>
<P></P></DIV>
<DIV><SPAN class=e id=q_10c400f628558046_4>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion mailing list<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:NSRCA-discussion@lists.nsrca.org" target=_blank>NSRCA-discussion@lists.nsrca.org</A><BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A> </SPAN></DIV>
<DIV>
<P></P>
<HR>
<P></P></DIV>
<DIV><SPAN class=q>No virus found in this incoming message.<BR>Checked by AVG Free Edition.<BR></SPAN></DIV>
<DIV>Version: 7.1.394 / Virus Database: 268.9.8/381 - Release Date: 7/3/2006<BR>
<P></P>
<P></P></DIV></DIV><BR>_______________________________________________<BR>NSRCA-discussion mailing list<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org </A><BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion" target=_blank>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A><BR><BR></BLOCKQUOTE></DIV><BR></BLOCKQUOTE></body></html>