<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2912" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dang Scott,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I sure hope you find out what it is. Are you
putting the servo's in the plane when you check them, or are they on the
bench. If they are in the plane, where are you running the antenna?
If the antenna is inside the fuse, pull it out and lay it outside the plane and
range check again.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Ken</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=f3aflyer7@gmail.com href="mailto:f3aflyer7@gmail.com">Scott
Pavlock</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Discussion List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, July 04, 2006 3:57
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Analog Servo
RF Masking and....Thanks!</DIV>
<DIV><BR></DIV>First I would like to thank everyone for the great advice on
these last few posts I've posted. Everyone has been a big help.<BR><BR>I'd
like to ask if anyone knows if an analog servo would mask glitches coming
in?<BR>(2 - Futaba 3010's, 2 - Hitec HS77's, 1 - HS81MG) <BR><BR>When I
connect my JR digital servos ( 2 - 9411sa's, 1 - 8411sa, 1 - 8417, 1 - 3421sa)
I get a pretty significant, constant glitch, as if the servos are constantly
trying to center, but they have no load what so ever. This is the problem I
have described in previous posts. <BR><BR>When I connect analog servos in an
identical set up, there is no "noise" at all. I range tested them at 100 feet
with 1 antenna section up and there is no loss in speed and no sluggish
behavior. I also range tested this at about 300 feet with the antenna
completely down just for kicks, and I get the same results. <BR><BR>When I
range test the digital servos, even at the 100 foot range with the antenna
completely extended there is a significant, constant glitch. The servos,
receiver, and transmitter have all just gotten back from being checked and the
9411sa's had new pots put in, the receiver had been re-tuned to the frequency,
and the transmitter got a new antenna. I am very surprised with these results
as I just spent a fair amount of money to have my electronics looked at and
deemed well. <BR><BR>Now, my question again, are my analog servos just masking
a problem, or is this solely a problem in the digital servos?<BR><BR>Thanks a
ton everyone!<BR><BR>Scott<BR>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>