<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1555" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Scott</FONT></DIV>
<DIV><FONT face=Arial size=2>At this point keep on eliminating and unplug things
until the problem goes away. You changed the batt rec and trans. now change the
switch assembly and harness.You said a change in attitude which might indicate
elevator servo. Replace it also. You are on the right track.If these are
hi-dollar servos and have a lot of time on them, they can be rebuilt,send
them off for feedback pots and gears.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jim Ivey</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=f3aflyer7@gmail.com href="mailto:f3aflyer7@gmail.com">Scott
Pavlock</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Discussion List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, June 16, 2006 6:51 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Interference
Problem</DIV>
<DIV><BR></DIV>Hopefully someone can help with this. I have been getting
interference on my Focus for the past three flights causing me to land, and I
can't seem to solve the problem. Initially I thought it was the RX and TX, so
I changed them both and moved to an entirely different frequency. I flew the
plane again and it glitched in the air just as the first two times. The glitch
is a quick and significant change in attitude. When I landed, the regulator
was warm so I removed it thinking it was going bad. I replaced it with a
regular 4 cell NiCd pack. I changed the receiver once again and am still
getting the glitch. I decided to remove all the arms from my servos (JR
Digitals) so that there would be no load and see how the problem is. The
servos, under no load, buzz considerably. It's not the "I'm under load" type
buzz, but more of a twitching, crackling type buzz. Are my servos going bad?
When I plugged in a new 8417, the buzz is non existant in that servo.
<BR><BR>Any help would be appreciated!!<BR><BR>Scott<BR>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>