<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2873" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>What kind of knots or crimps do you use to secure
the ends of the kevlar?</FONT></DIV>
<DIV>John Ferrell W8CCW<BR>"My Competition is not my
enemy"<BR><A href="http://DixieNC.US">http://DixieNC.US</A><BR></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=DaveL322@comcast.net
href="mailto:DaveL322@comcast.net">DaveL322@comcast.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, May 09, 2006 2:20 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Elevator
trim change</DIV>
<DIV><BR></DIV>
<DIV>
<DIV>The vinyl coated kevlar (kevcord) from ACP is great stuff - and I've
never experienced stretching with it - the cables do have a break-in period on
new planes - it is the vinyl jacket crushing, the knots tightening (or crimps
settling into the cable) - but that can happen with any cable system.</DIV>
<DIV> </DIV>
<DIV>I've had several planes hit 1,000+ flights with my own versions of the
DEPs system (which I've been using in various forms since 1988) and no pushrod
maintenance was required at any time. Weight is minimal when integrated
with the airframe structure from the beginning. I think Hebert and
Harrison could share similar experiences (as well as a few others, including
Troy). The COE is an issue, but it is very consistent and predictable,
and only an issue with rather substantial temp changes.</DIV>
<DIV> </DIV>
<DIV>Regards,</DIV>
<DIV><BR>Dave Lockhart</DIV>
<DIV><A
href="mailto:DaveL322@comcast.net">DaveL322@comcast.net</A></DIV></DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">--------------
Original message -------------- <BR>From: "Nat Penton"
<natpenton@centurytel.net> <BR>
<META content="MSHTML 6.00.2900.2873" name=GENERATOR>
<STYLE></STYLE>
<DIV><FONT face=Arial size=2>George I agree with your comments with one
exception. The Sullivan controll line kevlar is the best of all worlds for
our hookups. There is no stretch, no weight, no electromagnetic problems. It
is unidirectional with, probably, a low COE like carbon.</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=geobet@gis.net href="mailto:geobet@gis.net">george w. kennie</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, May 09, 2006 12:50
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion]
Elevator trim change</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Sorry Guys, I have some thoughts and opinions
on this that are based upon my own logic, however flawed,and which may or
may not coincide with someone else's logic.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Anytime you have a control system that is
based on a system that incorporates an oscillatory motion (fore/aft up/dn)
the ultimate result of this motion will generate wear somewhere within the
system and wear translates to slop.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I think my contention would be that Lance had
it right in the first place and was ill-advised by some well
intentioned souls who may have had what they assumed to be good
results, but failed to base their conclusions on really long-term
experience(who really knows for sure?)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have long felt that pull-pull cables
(vinyl-coated steel) present the most reliable connection for the
elevator and rudder inputs.They do not require that the horns
be expensive ball-bearing units, they are the lightest by far and due
to the fact that they are always under tension the generated wear
manifests itself against only one wear surface instead of the two in the
push-pull set-up. If the installation can be modified in such a way that
the servo can be mounted just ahead of the stab the COE of the fuse
can be rendered virtually inaffective. </FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>With time, you may experience some slight
lessening in cable tension (very slight) which can quickly be rectified by
disconnecting the clevis and spinning the eye a half turn at each
connection.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>I have used Kevlar thread and continue to do
so, but not on two-meter projects.Kevlar stretches for quite a period of
time before settling to it's final length.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Just my $.02</FONT></DIV>
<DIV><FONT face=Arial size=2>G.</FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=patterndude@comcast.net
href="mailto:patterndude@comcast.net">Lance Van Nostrand</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, May 08, 2006 8:55
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion]
Elevator trim change</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>This rots. I've used pull pull
forever and switched to the deps system due to heavy promotion by Mike
Harrison and Bryan Hebert. They say it will be more precise.
Can anyone corroborate this? I'd hate to switch to a system that
has more downside than upside.</FONT></DIV>
<DIV><FONT face=Arial size=2>--Lance</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=gfowler@raytheon.com href="mailto:gfowler@raytheon.com">Gray
E Fowler</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, May 08, 2006 10:51
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion]
Elevator trim change</DIV>
<DIV><BR></DIV><BR><FONT face=sans-serif size=2>Fiberglass laminate
CTE = 6 X10 -6/in/in/F</FONT> <BR><BR><FONT face=sans-serif size=2>CF
pushrod CTE = 1 X 10 -6 /in/in/F ....could actually be 0 if
fiber vloume is > 58% an all uni fibers</FONT>
<BR><BR><BR><BR><FONT face=sans-serif size=2><BR><BR><BR>Gray
Fowler<BR>Principal Chemical Engineer<BR>Composites Engineering</FONT>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing list<BR><A
href="mailto:NSRCA-discussion@lists.nsrca.org">NSRCA-discussion@lists.nsrca.org</A><BR><A
href="http://lists.nsrca.org/mailman/listinfo/nsrca-discussion">http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</A></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<P>
<HR>
<P></P>Internal Virus Database is out-of-date.<BR>Checked by AVG Free
Edition.<BR>Version: 7.1.385 / Virus Database: 268.4.4/318 - Release Date:
4/18/2006<BR></BLOCKQUOTE></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>