<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2873" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi John,</FONT></DIV>
<DIV><FONT face=Arial size=2>This is first thing in the morning for me, which I
don't usually do until about noon, but I had to see if there were any responces
to my inquiry and somehow, before I even turned on I had a feeling that I would
hear from you, "old reliable"!</FONT></DIV>
<DIV><FONT face=Arial size=2>Thanks for the feedback! Yup, my 9C is a super and
you may be right about a hidden mix and I will check for same.I will have to
check and see if there is a "reset to default" and do the whole set-up again,
but I was trying to avoid that as it takes me about 4 hours to do a complete
set-up, aarrggghh!</FONT></DIV>
<DIV><FONT face=Arial size=2>Oh!,.......I just wanted to let you know that I got
my new computer and have your simulator installed and I love it (like you said).
I'm a thumber on the left stick and my thumb is sore as a buggar from spending
too much time on the sim.</FONT></DIV>
<DIV><FONT face=Arial size=2>Hey, thanks John,.....lots!</FONT></DIV>
<DIV><FONT face=Arial size=2>Georgie</FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=jpavlick@idseng.com href="mailto:jpavlick@idseng.com">John
Pavlick</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, May 04, 2006 7:36
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion]
Programming</DIV>
<DIV><BR></DIV>
<DIV><SPAN class=390052423-04052006><FONT face=Arial color=#0000ff
size=2>Georgie,</FONT></SPAN></DIV>
<DIV><SPAN class=390052423-04052006><FONT face=Arial color=#0000ff
size=2> Is this a 9C or 9C "Super"? I have one of the older 9C's (non-
Super) but I might be able to help. Describe your P-mixes in detail. Look
at ALL the mixes in there. Maybe there is some other mix enabled that you
don't know about. My guess is there is some mix that has link enabled (not the
ones you set up, but another on that you don't know about). If all else fails,
just copy the model that works into another spot, then change the things that
you need to make it work on the new model. If it works correctly, just
overwrite the saved model that you're having problems with
now.</FONT></SPAN></DIV>
<DIV><SPAN class=390052423-04052006>
<P><FONT size=2>John Pavlick<BR><A href="http://www.idseng.com/"
target=_blank>http://www.idseng.com</A><BR> </FONT>
</P> </SPAN></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B>
nsrca-discussion-bounces@lists.nsrca.org
[mailto:nsrca-discussion-bounces@lists.nsrca.org]<B>On Behalf Of </B>george
w. kennie<BR><B>Sent:</B> Thursday, May 04, 2006 5:55 PM<BR><B>To:</B> NSRCA
Mailing List<BR><B>Subject:</B> [NSRCA-discussion]
Programming<BR><BR></FONT></DIV>
<DIV><FONT face=Arial size=2>Hi Guys,</FONT></DIV>
<DIV><FONT face=Arial size=2>I'm in need of a little help from any of the
Futaba 9C gurus out there.</FONT></DIV>
<DIV><FONT face=Arial size=2>After setting up a new airplane yesterday I
noticed a problem that I had never run into before and I'm hoping
somebody can help me rectify the situation.</FONT></DIV>
<DIV><FONT face=Arial size=2>In my programming procedure I incorporated
4 P-mixes along with all the other D/R's, Expo's,e.t.c. However, at the
conclusion of my session I noticed that the rudder dual rate switch affected
the throws of the P-Mixes to the same percentage value as the dual rate
function. This happens even if I assign a different switch to the rudder
dual rate function, i.e. if I assign switch "G" to the rudder dual
rate function the values of the P-Mixes change when I throw switch "B"( the
normal rudder dual rate switch).</FONT></DIV>
<DIV><FONT face=Arial size=2>I have another model programmed into this same
transmitter with the same 4 P-Mixes installed and there is no problem with
that model when I throw switch "B".</FONT></DIV>
<DIV><FONT face=Arial size=2>All the mix switches are set to null with links
and trims set to the "off" position.</FONT></DIV>
<DIV><FONT face=Arial size=2>Something's got to be running in the background
that is enabling the "B" switch to have overriding authority over the mix
functions. </FONT></DIV>
<DIV><FONT face=Arial size=2>Anybody out there got any ideas. Any and all
input is greatly appreciated.</FONT></DIV>
<DIV><FONT face=Arial size=2>TIA,</FONT></DIV>
<DIV><FONT face=Arial size=2>Georgie</FONT></DIV></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>