<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML style="FONT-SIZE: x-small; FONT-FAMILY: MS Sans Serif"><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2873" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 bgColor=#ffffff leftMargin=7 topMargin=7 rightMargin=7>
<DIV>Ihncheol:</DIV>
<DIV>Are you good with a solder iron? Make your own mode 1 changes if
so. You're just moving wires from one pot to another. I guess you
would have to deal with the wiring on the digital trims too. Could be
done, ofcourse your warranty goes poof!</DIV>
<DIV> </DIV>
<DIV>Ed</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=PnAHobbies@sbcglobal.net href="mailto:PnAHobbies@sbcglobal.net">Park,
Ihncheol</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">'NSRCA Mailing List'</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, April 21, 2006 3:42
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Brio 10
Set up</DIV>
<DIV><BR></DIV>
<DIV dir=ltr align=left><SPAN class=500413519-21042006>I am going with
Six-Series with gearbox setup. E-Flite 40Amp, TP 2100, 4x Futaba S3110,
JR 610UL. APC 12x6E.</SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=500413519-21042006>I've tried E-Flite 480
on a Pilot Zero 10, but with 3S 2100. It was under 30 oz and flew
really well. I don't think the 1320 will do very well</SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=500413519-21042006>I wish Spektrum comes
out with Mode 1 for me.</SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=500413519-21042006></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=500413519-21042006>Ihncheol
Park</SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=500413519-21042006>P & A
Hobbies</SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma><B>From:</B> <A
href="mailto:nsrca-discussion-bounces@lists.nsrca.org">nsrca-discussion-bounces@lists.nsrca.org</A>
[mailto:nsrca-discussion-bounces@lists.nsrca.org] <B>On Behalf Of </B>Ed
Alt<BR><B>Sent:</B> Friday, April 21, 2006 12:45 AM<BR><B>To:</B> NSRCA
Mailing List<BR><B>Subject:</B> Re: [NSRCA-discussion] Brio 10 Set
up<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV>I just finished setting everything up in my "minúsculo Brio". I
grudgingly decided to use the Spektrum. REALLY wanted to use the 10SXII
or 10X, but why buy another receiver. I like my Spektrum for foamy work,
but thinking ahead to having to finally learn how to do useful mixes, fake a
rudder DR with a mix etc, get the switches working the way I want, I was being
lazy and wanted to avoid it. So I finally hit the books and have it
configured right, the only important piece missing is no expo on rudder.
</DIV>
<DIV> </DIV>
<DIV>I'm trying the "best recommended setup", i.e. the E-flite Park 480 1010Kv
outrunner and the E-flite 40A ESC and starting out with TP 1320's. Bench
tests don't seem too envouraging re. how the vertical will fare with just a
1320, but we'll see. Seems to sag fairly quickly and it might really
need a 2100 pack. The weight is encouraging though and another 2 oz with a TP
2100 isn't going to matter much I guess. I skipped their little plastic
spinner and the all-up weight with Spektrum Rx and 4 JR 281's is 28.9 oz, at
the low end of their recommended weight range of 28-34 oz. I was
suprised at how far forward I had to put the battery to achieve a 4" starting
balance point from the LE. It's as far forward as it can go.
Hoping to fly soon if the weather cooperates.</DIV>
<DIV> </DIV>
<DIV>BTW, has anyone using the 281 digitals noticed that they are never
'happy'? All of mine run through this cyclic little 'blit' where they
can't help but try moving a step and then go back. It's not an
oscillation per se, there are several seconds or more between these 'blits'
and it is competely unrelated to whether they are connected to a control
surface or not and also unrelated to battery voltage to the receiver.
Also unrelated to receiver type or transmitter used, doing the same thing on a
R955S as it does connected to a Spektrum receiver. No relation to lead
length either. It's just what they like to do apparently. Anyone else
seeing this? Seems like a deadband value issue could be involved.</DIV>
<DIV> </DIV>
<DIV>Ed</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=patternrules@earthlink.net
href="mailto:patternrules@earthlink.net">Steven Maxwell</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, April 16, 2006 5:17
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Brio 10
Set up</DIV>
<DIV><BR></DIV>
<DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>
<DIV>Steven Maxwell</DIV>
<DIV></DIV>
<DIV></DIV>
<DIV> </DIV></DIV></DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid">
<DIV style="FONT: 10pt Arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=Pattrnflyr@aol.com href="mailto:Pattrnflyr@aol.com"></A></DIV>
<DIV style="FONT: 10pt arial"><B>To: </B><A
title=nsrca-discussion@lists.nsrca.org
href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A></DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> 4/16/2006 4:36:02 PM </DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Brio 10
Set up</DIV>
<DIV><BR></DIV><FONT id=role_document face=Arial color=#000000>
<DIV>Just wondering which motor, battery, ESC, prop to use on this
aircraft. Also I fly at 6000 msl. Where would you buy all the
accessories and aircraft. TIA</DIV></FONT></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion
mailing
list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BODY></HTML>