<html><body>
<DIV>Wayne,</DIV>
<DIV> </DIV>
<DIV>Very good point. Actually, I have been thinking to go in this direction. Perry sells a carburator specifically design for the Perry Pump. The OS 160 (and 140 RX too) is 15 mm bore. The Perry Pump carburator that would mach this is the part number 9500. Cost $44.50. The ID of the carburetor barrel is .375" that is around 9.5 mm. That looks about right for the OS. DOES ANYONE TRY THIS ALREADY ON THE OS 160 OR OS 140 RX?</DIV>
<DIV> </DIV>
<DIV>I had the same good experience many years ago. In that case it was Super Tiger 46 G. </DIV>
<DIV> </DIV>
<DIV>Vicente Bortone,</DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: "Wayne Galligan" <wgalligan@goodsonacura.com> <BR>
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<DIV><FONT face=Arial size=2>One point of interest here and it hasn't been mentioned in any of the other posts. It would be best to run the Perry Carb when using the Perry pump. I tried this on the ST2300 and it would not work with the stock carb. Installed the large bore Perry carb and once the needle was set it was fire it up and fly and a very reliable setup. I would check to see if there is a carb available for the OS 1.60 and concider this since its not worth the time and frustration(carb cost is well worth it). I now run that ST2300 in a Funtana and I never touch the needle setting, amazingly the engine has the original bearing and ring and it has well over 450 flights on it.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Wayne Galligan</FONT></DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=jpavlick@idseng.com href="mailto:jpavlick@idseng.com">John Pavlick</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, March 05, 2006 3:55 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Fuel Regulation in 2C Engines</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial color=#0000ff size=2><SPAN class=990502921-05032006>Yeah, I tend to agree with Nat here. After some discussion about the Perry loop idea, I know someone who actually tried it. It came down to the theory vs. reality thing i.e. "only one way to find out..." It seemed like a good idea, but it didn't seem to work on our big motors. I think that in order for this to work properly, you would need a pump that is capable of way more volume AND pressure than you need. In addition to this, the regulator should be an external device, not inside the pump like the way it is with a VP-30, or the internal regualtor needs to have an eaxternal "return" line. This is how a fuel-injected automotive system works, so it is possible. The Perry loop thing works for R/C cars and smaller motors but I think the pump needs more volume to feed our big motors with that big gaping "hole" in the system (the return loop). Maybe tuning the size of the return loop with a restrictor would be worth a try. Is it worth the effort? Generally a VP-30 that is properly adjusted will give reliable performance with just a vent line and no tank pressure / no return loop. Props have a big effect on what happens when you return to idle too. If you want to help downline braking, look at props before you spend a lot of time re-designing the fuel system. Also, try setting the idle a little bit richer. The slow transition to idle condition is sometimes aggravated by a lean idle mixture. Not trying to discredit anyone's theories, just passing along some of my observations.</SPAN></FONT></DIV>
<DIV><FONT face=Arial color=#0000ff size=2><SPAN class=990502921-05032006></SPAN></FONT> </DIV>
<DIV><FONT face=Arial color=#0000ff size=2><SPAN class=990502921-05032006>
<P><FONT size=2>John Pavlick<BR><A href="http://www.idseng.com/" target=_blank>http://www.idseng.com</A><BR> </FONT> </P></SPAN></FONT></DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma size=2>-----Original Message-----<BR><B>From:</B> nsrca-discussion-bounces@lists.nsrca.org [mailto:nsrca-discussion-bounces@lists.nsrca.org]<B>On Behalf Of </B>Nat Penton<BR><B>Sent:</B> Sunday, March 05, 2006 3:48 PM<BR><B>To:</B> NSRCA Mailing List<BR><B>Subject:</B> Re: [NSRCA-discussion] Fuel Regulation in 2C Engines<BR><BR></DIV></FONT>
<DIV><FONT face=Arial size=2>Diaphram operated fuel pumps made by OS ( Hanno, 140 RX, 91 SH <Perry?>) are self regulating in that output is proportional to RPM, proportional to need. These pumps can be adapted to any 90 to 160 two stroke with JB Weld and without maching skills. The tank is vented and there is no pressure in the system.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have had impeccable performance using these pumps on the OS91FX for the last four years. I believe the logic in the circulating systems is flawed. Nat</FONT></DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=vicenterc@comcast.net href="mailto:vicenterc@comcast.net">vicenterc@comcast.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> ; <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">NSRCA Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, March 05, 2006 12:22 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [NSRCA-discussion] Fuel Regulation in 2C Engines</DIV>
<DIV><BR></DIV>
<DIV>Hi Brian,</DIV>
<DIV> </DIV>
<DIV>You got it right. In the OS 160 we would like to set up the pressure in the header before the carb as close as possible to the original design (muffler pressure with tank close to firewall). In this way, the carburetor metering system will work as was originally designed. I will be doing some test and see what will work better. </DIV>
<DIV> </DIV>
<DIV>The expert at Perry recommended to send the overflow to the tank. However, I agree that loop around the fuel pump could work since that is one old method to control pressure in industrial pumps. </DIV>
<DIV> </DIV>
<DIV>Vicente</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: brian young <brian_w_young@yahoo.com> <BR>
<DIV>So I guess the thinking behind doing this is that you deliver the fuel to the carb and its there for the carb to take. But the fuel at the carb nipple will only be under atmospheric pressure (since the tanks vented), anything extra is free to go back to the tank. The venturi affect of the carb will draw the fuel into the carb. I dont see why you would need to go clear back to the tank, just loop around the pump. </DIV>
<DIV> </DIV>
<DIV>This sounds like it could take the variability of pumps out of the equation and at the same time let the pump deliver fuel to the carb, but not push fuel into the carb.</DIV>
<DIV> </DIV>
<DIV>Interesting.<BR><BR><B><I>Wayne Galligan <wgalligan@texasairnet.com></I></B> wrote:</DIV>
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<META content="MSHTML 6.00.2800.1528" name=GENERATOR>
<STYLE></STYLE>
<DIV><FONT face=Arial size=2>Vincent,</FONT></DIV>
<DIV>! <FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I wonder if this "T" setup would work on an OS 1.40. I already use the check valve in the vent so a couple of "T's" and maybe I would be in business. Would you have to change the pump pressure?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Wayne Galligan</FONT></DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=vicenterc@comcast.net href="mailto:vicenterc@comcast.net">vicenterc@comcast.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=nsrca-discussion@lists.nsrca.org href="mailto:nsrca-discussion@lists.nsrca.org">nsrca-discussion@lists.nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent! :</B> Sunday, March 05, 2006 8:19 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [NSRCA-discussion] Fuel Regulation in 2C Engines</DIV>
<DIV><BR></DIV>
<DIV>
<DIV>
<DIV>Good morning all,</DIV>
<DIV> </DIV>
<DIV>I have been using the OS 160, OS 140 RX and Mintor 140 with good results in the last 4-5 years. We have been comparing and discussing the advantages of YS compared with 2C. One of the main advantages of YS is that in transition when power down the engine goes instantly to 2000 RPM or less. The 2C engines always takes too much time to get down to idle and I believe that causes us (in pattern) some problems. </DIV>
<DIV> </DIV>
<DIV>I have been thinking that the problem is that the carburetor and or fuel system that can not regulate properly (pressure or flow). I think in these engines, the pumps are set to deliver fuel at full flow (or pressure) without any regulation system (like the YS). ! I had the opportunity to discuss this issue with Perry Pump and they recommended to install a by-pass line. The idea is to send the excess fuel (pressure) back to the tank during transition. Perry Pump recommended to install the T as close as possible to the carburetor needle valve. Also in their web site they have an idea that he said is used for cars that is a by-pass line that loop around the pump (<A href="http://www.perrypumps.com/instructions.htm" target=_blank>http://www.perrypumps.com/instructions.htm</A>, Click on Pump and By-Pass Systems). I think the ideas deserve some checking since it is natural to have this type of regulation to maintain constant pre! ss! ure in the line before needle valve. I tried the other day the by-pass to the carburetor but I installed the T too far from the carburetor and forgot to open the vent in the tank. Of course the results were bad since I was developing vacuum in the tank. I wi! ll try these options of by-pass lines as soon as get warmer. However, I think someone out there already tried to do this and know results so I am looking for feed back.</DIV>
<DIV> </DIV>
<DIV>Thanks in advance,</DIV>
<DIV> </DIV>
<DIV>Vicente Bortone</DIV>
<DIV> </DIV></DIV></WMFILTERED></DIV>
<DIV>
<HR>
<DIV> </DIV>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</DIV></BLOCKQUOTE>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE><BR>
<P>
<HR SIZE=1>
Relax. Yahoo! Mail <A href="http://us.rd.yahoo.com/mail_us/taglines/virusall/*http://communications.yahoo.com/features.php?page=221">virus scanning</A> helps detect nasty viruses! </BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<P>
<HR>
<P></P>Internal Virus Database is out-of-date.<BR>Checked by AVG Free Edition.<BR>Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date: 2/10/2006<BR></BLOCKQUOTE></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>NSRCA-discussion mailing list<BR>NSRCA-discussion@lists.nsrca.org<BR>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion</BLOCKQUOTE></BLOCKQUOTE></body></html>