[NSRCA-discussion] Proton Pathfinder Stuck in DFU Mode

[Derek Emmett]

 Vicente, yes... Proton Control Systems has a kluge document dialog, thus I'm sure folks can have many issues. 

How about we do that one after the Proteus... lol..
BestDerek... 

    On Tuesday, October 4, 2022 at 02:38:03 PM PDT, Vicente Bortone <vincebrc at gmail.com> wrote:  
 
 Hi Derek,
That means that you are getting a future article for D5 K-Factor.  je,,,,je....je
Vicente "Vince" BortoneNSRCA 1140.  Be Proud to show your NSRCA #


On Tue, Oct 4, 2022 at 4:10 PM Bob Kane via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:

Thanks for taking one for the team . . . .  I have not started playing around with mine yet.
Bob Kane getterflash at yahoo.com 

    On Tuesday, October 4, 2022 at 04:24:02 PM EDT, Derek Emmett via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:  
 
  My guess is nobody is doing firmware updates to their Proton Pathfinder via the STM32?... 

Well, after many, many hours, I figured out the problem, so please note:
On the Proton Control Systems Facebook page (Dated Nov 4, 2021) they post firmware path at: 
>From download instructions:   
   - Downloading Arduplane file, arduplane_with_bl.hex from https://firmware.ardupilot.org/Plane/stable/OMNIBUSF7V2/  This is INCORRECT!
   - The CORRECT PATH is: https://firmware.ardupilot.org/Plane/stable/omnibusf4pro/    Use file arduplane_with_bl.hex

I've asked Proton to update their Facebook page to reflect the correct path.
Crazy problems an error on their part like this causes... They need to pay me back for finding this issue... lol... The wrong firmware path created a boot problem, so the Pathfinder no longer looked like a USB device, thus you could no longer use Mission Planner... In addition it could not be used as a flight logging device!  

RegardsDerek...




    On Monday, October 3, 2022 at 07:49:57 PM PDT, Derek Emmett via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:  
 
  Hey Gang,have any of you updated the firmware on the Proton Pathfinder, using the STM32 program software?  In any case, it requires that the Pathfinder be in DFU (Device Firmware Upgrade) mode, which is done by putting a paper clip on the DFU mode button. 

Programing the Pathfinder with the STM32, while in DFU mode, worked great, however, it stays stuck in the mode, thus I'm not able to use the Mission Planner now.   Of course I've tried power cycling and holding the button down, but to no change. 

I could not find anything on this issue via Protons Facebook page, or anywhere else.  Steve Hanna was able to update his FW via Mission Planner, where my hardware would not, thus using the STM32 software.    

Best regardsDerek...  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20221004/9c76f1c4/attachment.html>