[NSRCA-discussion] New Masters Maneuver

[Patrick Harris]

There is nothing in the description that says the segments need to be
equal, but the drawing is a good starting point to our understanding. My
belief is the drawing is correct, minus the equal segments, but I could be
in error.

On Thu, Nov 4, 2021 at 8:03 PM davel322--- via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> +1
>
>
>
> The centers of the KE and upright portions have been defined.
>
>
>
> The hesitations should be equal.  The roll rate should be constant.
>
>
>
> Duration of rolling vs duration of “point” has never been defined
> (historically).  Fast / medium / slow rolling is a style consideration.
>
>
>
> Dave
>
>
>
> *From:* NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> *On
> Behalf Of *Jerry Budd via NSRCA-discussion
> *Sent:* Thursday, November 4, 2021 9:49 PM
> *To:* NSRCA-list List <nsrca-discussion at lists.nsrca.org>
> *Subject:* Re: [NSRCA-discussion] New Masters Maneuver
>
>
>
> I get it too.  But where does it say that?
>
>
>
> Thx, Jerry
>
> Budd Engineering
> jerry at buddengineering.com
> 661-435-0358
>
>
>
> On Nov 4, 2021, at 6:39 PM, john tarpinian via NSRCA-discussion <
> nsrca-discussion at lists.nsrca.org> wrote:
>
>
>
> Ok, I get it.  I didn't realize that *the rolling and non roling sections
> were to be of equal lengths*.
>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20211105/b1d2e195/attachment.html>