[NSRCA-discussion] Fwd: Re: Metric Bolts

[chuenkan at comcast.net]

Pre-PS, Ron, the longer bolts can always be "Dremel-ed" to the length needed...

“The difference between stupidity and genius is that genius has its limits.” – Joe Bokalotz
Phil Spelt, AMA 1294, Scientific Leader Member
SPA L-18, Board Member, NSRCA 2032, KCRC Emeritus
Knoxville, TN  37931   (865) 604-0541c

>     ---------- Original Message ----------
>     From: Phil Spelt via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
>     To: rcpilot at wowway.com, General pattern discussion <nsrca-discussion at lists.nsrca.org>
>     Date: 01/23/2021 4:46 PM
>     Subject: Re: [NSRCA-discussion] Metric Bolts
>      
>      
>     Hi, Ron,
>      
>     I have metric bolts of MANY sizes, up to7 or 8 mm.  I would say I would be most interested in a set with:  2, 2.5, 3, and 4 mm.
>      
>     Hope this helps...
> 
>     “The difference between stupidity and genius is that genius has its limits.” – Joe Bokalotz
>     Phil Spelt, AMA 1294, Scientific Leader Member
>     SPA L-18, Board Member, NSRCA 2032, KCRC Emeritus
>     Knoxville, TN  37931   (865) 604-0541c
> 
>         > >         On 01/23/2021 3:24 PM Ron Hansen via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> >          
> >          
> > 
> >         Looking to put together a metric bolt set.
> > 
> >          
> > 
> >         What are the 4 most popular metric bolt sizes?
> > 
> >          
> > 
> >         Thanks
> > 
> >          
> > 
> >         Ron Hansen
> > 
> >         _______________________________________________
> >         NSRCA-discussion mailing list
> >         NSRCA-discussion at lists.nsrca.org
> >         http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> > 
> >     > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20210124/53146e62/attachment.html>