[NSRCA-discussion] 18SZ throttle stick limits of travel

[Derek Emmett]

 Hi Vicente,the stock JR 28X has full stick range on the throttle.  However, if you add the "stick vertical control blocks" you can then limit the throw (5, 10, and 15 degrees) depending on the block you use.
BestDerek...

    On Monday, January 18, 2021, 4:25:28 PM PST, Vicente Bortone via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:  
 
 It also applies to JR.
Vicente “Vince” Bortone 
On Mon, Jan 18, 2021 at 6:08 PM Michael Cohen via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:


Yep, I think I will leave it alone, relying on my world championship skills to bring me pattern glory!

 

Y’all can stop laughing now.

 

Mike C

 

Sent from Mail for Windows 10

 

From: Don Ramsey via NSRCA-discussion
Sent: Monday, January 18, 2021 9:30 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] 18SZ throttle stick limits of travel

 

Jim’s explanation also applies to Futaba.  I noticed this travel limit on my Futaba 18MZ so I took it apart and found the travel stop.  After checking on other Futaba transmitters, I found it on all I checked so, I decided to keep it installed.

 

Don

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Jim Porter via NSRCA-discussion
Sent: Sunday, January 17, 2021 5:48 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] 18SZ throttle stick limits of travel

 


I noticed today while increasing the tension on the throttle stick that it does not use the full range as compared to the small white marks to the left of the stick.  The elevator does.  I did not see an adjustment for this in the manual and did not find anything when looking on YouTube.  Anyone know if this can be changed?  If there is more sweep available, the precision of position to response on the airplane would be better.


This is seen on lots of different brands.  Most have a small removable plastic stop on each end of the throttle stick travel.  If you really feel the need for extra throttle travel and are up to it, you can remove these stops.  Just be aware that this can make the stick action at the end of the travel a little different.  On my DX 20 this makes the stick want to move to and stay at the full throttle end of the travel when you approach full throttle.  As I fly mostly large scale sailplanes and use the throttle stick for flaps I don't find this a problem.

I think this may have been done to avoid over travel on the throttle servo when you add in the trim action.

Your mileage may vary.

Jim Porter

 

 

 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-- 
Vicente "Vince" Bortone_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20210119/fd809cf1/attachment.html>