[NSRCA-discussion] 10S UBEC Question

[Robert Campbell]

You can tap power off the low two cells in a 10s pack through the balance
plug.  Make sure you take power from the "most negative" cells.

Rob

On Fri, Jun 12, 2020, 5:41 PM jerry--- via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> Does anyone know of a 10S UBEC that will output 8.2V and will handle HV
> (43.5V) packs?  I found one for conventional 10s packs but it only outputs
> up to 6V.
>
> I bought a pair of OS controllers to use with 2 OS belt drives I have but
> they don’t have BEC output.  Obviously I could go with dual lipos but my
> preference is to use a BEC with one lipo pack.
>
> Thx, Jerry
>
> Budd Engineering
> jerry at buddengineering.com
> 661-435-0358
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200612/94bc9c2d/attachment.html>