[NSRCA-discussion] Judging question

[Don Ramsey]

So, how many points do you downgrade?

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Vicente Bortone via NSRCA-discussion
Sent: Sunday, July 5, 2020 4:11 PM
To: Keith Black; General pattern discussion
Subject: Re: [NSRCA-discussion] Judging question

 

I will do a proportion of the square out of the box.  

 

Vicente "Vince" Bortone

 

 

On Sun, Jul 5, 2020 at 4:01 PM Keith Black via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:

Nice question. Sounds like 3/8 this of the maneuver is not acceptable, that leaves you with about a 6. Unless you decide to zero on the grounds that the entire maneuver must be in the box. 

 

Keith

 

On Sun, Jul 5, 2020 at 3:26 PM Don Ramsey via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:

During a judging discussion recently, a question came up that I would like to get input from the group.  Setup: A centered square loop (as if there could be a turnaround version) is flown with the upper radii and horizontal line flown out of the box.  The other elements are perfect.  What is your downgrade for the box violation?

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200705/85733671/attachment.html>