[NSRCA-discussion] Neu bearings- Old style Neu from year 2013

[David Harmon]

Boca Bearing might have the right size(s).

 

David Harmon

NSRCA 586

Sperry, OK

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of tim pritchett via NSRCA-discussion
Sent: Friday, January 3, 2020 11:51 AM
To: tocdon at netscape.net; nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Neu bearings- Old style Neu from year 2013

 

Don, 

   I'm running the same set up in my Pandora (Neu + V3) If you come up with a source, please share the information...thanks!



-----Original Message-----
From: Don Szczur via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
To: nsrca-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
Sent: Wed, Jan 1, 2020 11:09 pm
Subject: [NSRCA-discussion] Neu bearings- Old style Neu from year 2013

I am getting ready to put a Neu motor into an airplane and was checking the bearings.  Pretty sure they are OK but I took apart the motor and figured I might as well change them if some are readily available out there.  If anyone has a source of bearings (front and rear- they look identical) let me know.  Its for a Neu F3A motor used in an earlier Brenner Contra V3 unit (e.g., Joseph's 2013-2015 WC model). 

 

Thanks in advance,

 

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200103/aa5836f2/attachment.html>