[NSRCA-discussion] Maneuver Question

[Don Ramsey]

No, I don’t think that is correct.  An ET is often done as a turnaround and is described as 45 up, loop over the top to vertical downline, exit in opposite direction of entry.  A reverse ET is done as a centered maneuver and described as 45 up, loop to a vertical upline, exit in same direction as entry.  The only difference is the direction of the loop, ET up, reverse ET down.  I don’t know if that is it and hoped some knew.

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Charlie Barrera via NSRCA-discussion
Sent: Thursday, August 20, 2020 10:36 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Maneuver Question

 

The Reverse Figure ET in both A23 and P23 begin at the bottom - 45 degree uppline, 7/8 loop to vertical line, 1/4 loop to level flight. It's maneuver #11 in the Aresti diagram. I think the normal ET begins at the top with the 1/4 loop to vertical down line, 7/8 loop to 45 degree downline, 1/8 loop to exit. That would be my guess. 

 

 

On 08/20/2020 07:53 AM, Tjpritchett via NSRCA-discussion wrote:

Is it not simply a reversal of the entrance and exit, so that it’s flown in the reverse direction?

Sent from my iPhone


On Aug 20, 2020, at 8:32 AM, Don Ramsey via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:

Does anyone know what makes a Figure ET a reverse ET vs an ET

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200820/998a5c7a/attachment.html>