[NSRCA-discussion] Power Connectors: Yeah, late / new to the party

[Atwood, Mark]

I was a long time Dean’s user and got tired of the spark damage to the tips and the occasional breaking of spring clip.  So I went on a search for something different and settled on the these from Hobby king.  Basically 4mm bullets in a polarized housing so you can’t reverse anything.  I’ve been very happy with them.  Inexpensive, easy to solder, easy to plug and unplug, and what little spark damage there is, is done to the tip of the bullet, rather than the primary connection surface.

https://hobbyking.com/en_us/hxt-4mm-gold-connector-w-protector-10pcs-set.html


MARK ATWOOD
o.  (440) 229-2502
c.  (216) 316-2489
e.  atwoodm at paragon-inc.com<mailto:atwoodm at paragon-inc.com>

Paragon Consulting, Inc.
5900 Landerbrook Drive, Suite 205, Cleveland Ohio, 44124
www.paragon-inc.com<http://www.paragon-inc.com/>

<http://www.paragon-inc.com/>
Powering The Digital Experience

On Dec 3, 2019, at 1:26 PM, Anthony Romano via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:

CAUTION: Message originated from outside of Paragon. Use caution regarding any links, attachments, credential and financial requests.

Another long time Deans user. The majority of connector failures I have seen were Power Poles that weren't crimped properly both commercially bought and home built.
When parallel charging plug the packs to the board then to the plug the board to the charger to avoid  sparks

Anthony
________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org>> on behalf of Patrick Harris via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Tuesday, December 3, 2019 12:39 PM
To: davel322 <davel322 at comcast.net<mailto:davel322 at comcast.net>>; General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Subject: Re: [NSRCA-discussion] Power Connectors: Yeah, late / new to the party

Dean's all the way. When you parallel just be sure and put the rubber cap onto the lead you disconnected.

On Tue, Dec 3, 2019 at 9:30 AM davel322 via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:
I also do not parallel charge.

Power poles are safe enough for pattern, but the Dean's do handle heat and high current better - I don't know exact values in terms of mah per flight or peak amps.

All the EC, XT, and Castle connectors that are shielded work similarly.  Plain bullets can be reasonably shielded using varieties of heat shrink tubing and fuel tubing.

Pick your poison....I'm sticking with Deans.

Regards,

Dave

Sent from my Sprint Samsung Galaxy Note8.

Apologies in advance for any typos undoubtedly introduced by auto correct and / or talk to text.


-------- Original message --------
From: james woodward via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Date: 12/3/19 11:51 (GMT-05:00)
To: General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Subject: [NSRCA-discussion] Power Connectors: Yeah, late / new to the party

Gents,

What is the current thoughts on ESC/Power connectors?  I started with EC5's, wasn't too pleased with the assembly/dissassembly methods.  Went to Dean's, because they are really easy to solder,  less bulky, lighter.

I'm also parallel charging.  So this means I have a 6 lead Male Deans cable.  For the very first time, I actually touched-off one of these cable positive/neg lead tabs, and created a spark/weld action :(   I was in the process of unplugging all the leads after finishing a storage charge, and the touch-off happened.

Thus, I'm rethinking...  Has anyone made a protective shield that surrounds the male side, and stays put on the Dean (not like the removable cover pieces available).

Would appreciate some thoughts.  Thx Jim
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20191203/465835c1/attachment.html>