[NSRCA-discussion] Futaba problem

[Don Ramsey]

You are correct.  I never thought of that.  Earl Haury saved me and the
system is now fully functional.

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
Behalf Of Ken Dunlap via NSRCA-discussion
Sent: Saturday, August 3, 2019 1:47 PM
To: Vicente Bortone; General pattern discussion; Dave Burton
Subject: Re: [NSRCA-discussion] Futaba problem

 

It's the battery failsafe. You must have linked the receiver at 7.4 v and
that's what was remembered. They you attached the powerbox at 5.9 v and the
receiver went to throttle fail safe. Q.E.D. :)9

 

Get Outlook for iOS <https://aka.ms/o0ukef> 

  _____  

From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf
of Vicente Bortone via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, August 3, 2019 12:52:15 PM
To: Dave Burton <burtona at atmc.net>; General pattern discussion
<nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] Futaba problem 

 

Power box sensor switch probably has a built in safety that limits the
throttle signal. Just a wild guess.  

 

On Sat, Aug 3, 2019 at 11:38 AM Dave Burton via NSRCA-discussion
<nsrca-discussion at lists.nsrca.org> wrote:

Switch to Spektrum?

 

From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> On Behalf
Of Don Ramsey via NSRCA-discussion
Sent: Saturday, August 03, 2019 11:38 AM
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Futaba problem

 

I recently had a problem with my Futaba 18MZ system.  Several days later
Earl Haury solved the mystery.  Here's the problem:

*	System worked fine with an unregulated 2S lipo into the receiver
*	I put in a Powerbox Sensor switch, regulated to 5.9 v for the
receiver
*	All functions except the throttle worked fine.
*	Motor would arm but would not run
*	Changed all components of the system, receiver, ESC, motor, etc but
nothing helped.

What is your solution to the mystery?

 

Don

 


 
<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.avg.co
m%2Femail-signature%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%
3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C09dced88b8a24d9b2e
aa08d71832fb5f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6370044795519290
19&sdata=YekYFUQjGn9M4cUeb%2FWonianN81dAiiNnrzQjeRK4Wg%3D&reserved=0> 

Virus-free.
<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.avg.co
m%2Femail-signature%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%
3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C09dced88b8a24d9b2e
aa08d71832fb5f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6370044795519390
30&sdata=n61%2FmFcJDY0cMZL%2BrBRZf1fO3eJyQiWO3NDX6obBjTU%3D&reserved=0>
www.avg.com 

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.nsrc
a.org%2Fmailman%2Flistinfo%2Fnsrca-discussion&data=02%7C01%7C%7C09dced88b8a2
4d9b2eaa08d71832fb5f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6370044795
51949035&sdata=%2Fbl8J69UUTgNvuwGk%2FaC1vkBpry7fSc1rjOaoYGLGRo%3D&reserved=0
> 

-- 

Vicente "Vince" Bortone

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20190803/ed0a7b60/attachment.html>