[NSRCA-discussion] Futaba problem

[Vicente Bortone]

Power box sensor switch probably has a built in safety that limits the
throttle signal. Just a wild guess.

On Sat, Aug 3, 2019 at 11:38 AM Dave Burton via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> Switch to Spektrum?
>
>
>
> *From:* NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> *On
> Behalf Of *Don Ramsey via NSRCA-discussion
> *Sent:* Saturday, August 03, 2019 11:38 AM
> *To:* 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
> *Subject:* [NSRCA-discussion] Futaba problem
>
>
>
> I recently had a problem with my Futaba 18MZ system.  Several days later
> Earl Haury solved the mystery.  Here’s the problem:
>
>    - System worked fine with an unregulated 2S lipo into the receiver
>    - I put in a Powerbox Sensor switch, regulated to 5.9 v for the
>    receiver
>    - All functions except the throttle worked fine.
>    - Motor would arm but would not run
>    - Changed all components of the system, receiver, ESC, motor, etc but
>    nothing helped.
>
> What is your solution to the mystery?
>
>
>
> Don
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-- 
Vicente "Vince" Bortone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20190803/4c5b5be2/attachment.html>