[NSRCA-discussion] Balsa Weights

[tocdon at netscape.net]

Thank you Don, this is very helpful. The techniques for balsa cutting are obvious but I often have split the bala when cutting out versus in.  The A, B and C grain descriptions and pictures are the best I've seen.  All are relevant to indoor RC pattern and F3P in addition to 2M.


Don



-----Original Message-----
From: Don Ramsey via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Sent: Tue, Dec 27, 2016 11:55 am
Subject: [NSRCA-discussion] Balsa Weights




For those of you who still build there is a couple of new pages about Balsa on my website.  One is a pdf file of balsa weight in both ounces and grams.  It’s on the building page near the bottom of the Navigation Table.
 
 
http://pages.suddenlink.net/donramsey
 
 

 
 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20170105/093073d1/attachment.html>