[NSRCA-discussion] Charger help please

Mark Hunt flyintexanmark at gmail.com
Fri Feb 10 07:14:49 AKST 2017


I have the I charger 308 duo.  Works great for me...wish I had got the 4010
for those occasional 10s bricks..

-mark

On Fri, Feb 10, 2017 at 8:42 AM, Vicente Bortone via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> I still have two 10X since 2004-5.  Both still working fine.  I remember
> having the noisy fans and replaced those.  That was long ago.  I agree that
> makes sense to send them back for service.
>
> On Fri, Feb 10, 2017 at 8:04 AM Stuart Chale via NSRCA-discussion <
> nsrca-discussion at lists.nsrca.org> wrote:
>
> Agree with Anthony on that, I do remember trying to charge 2 packs in
> series and burned out a balance board by not plugging the balance connector
> in with the negative on the right one.  Stopped charging in series after
> that.
>
> On 2/10/2017 8:59 AM, Anthony Romano via NSRCA-discussion wrote:
>
> Hi Jason,
>
>
> Bummer the 10XP are my primary chargers for a long time. Have you called
> them? They are pretty accessible for service.
>
> The iCharge 3010 is one of the few other chargers on the market that can
> charge 10s. Very powerful but you do have to plug the ground side balance
> plug in to the negative side of the board or bad things can happen.
>
>
> Anthony
>
>
> ------------------------------
> *From:* NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org>
> <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Jas S via
> NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
> <nsrca-discussion at lists.nsrca.org>
> *Sent:* Friday, February 10, 2017 8:06 AM
> *To:* nsrca-discussion at lists.nsrca.org
> *Subject:* [NSRCA-discussion] Charger help please
>
> Looking for a super charger for my 10S packs. I've lost confidence in my
> Cell-Pro 10XP's after 4 of them (2 new ones) all had a variety of issues
> that caused them to stop working.
>
> Needs to charge a 10S+ pack
> Fast charging since I have 24+ volt power supplies
> Easy (enough to use that this dummy can figure it out
> I don't need to know more than:
> Mah, volts, ir. Anything more I don't care about
>
> Thanks,
> Jason
>
> Jas iP
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> NSRCA-discussion Info Page
> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> lists.nsrca.org
> If you are interested in Pattern Precision Aerobatics, you may join this
> list. This list is not restricted to members of NSRCA. We hope you would
> eventually choose to ...
>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> --
> Vicente "Vince" Bortone
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20170210/17e155a0/attachment.html>


More information about the NSRCA-discussion mailing list